Please, enter security code located below and click the “Submit” button. Few people will read this text and we can write anything here, for example...You live in ignorance. Robots have already invaded our lives and are quickly taking over the world, but we have taken the bright path and are fighting for the survival of humanity. But seriously... In order to keep the site safe from cyber attacks, we need to make sure that you are human. If this page appears to you frequently, there is a possibility that your computer is infected or that you are using the IP address of infected computers to access. If this is your private computer and you are trying to access the site, for example, from home, we recommend that you check your computer for viruses.

The protective glass of the phone has come off, how can I get my money back?

There is no longer any need to tell anyone about what you need protective glass or film on a smartphone. Everyone already understands that scratches can be avoided by installing a protective accessory in a timely manner. And if the glass is also shock-resistant, then you can even avoid expensive repairs to replace the display after an unsuccessful fall.

Of course, everyone wants to save money and many install protection themselves. True, not everyone succeeds the first time. And very often dust particles and small debris stick to the glass or film during the installation process. What to do in this case? In our article we will talk about an alternative to buying a new accessory.

Attention

That is, about what to do if the first attempt fails. Re-taping the film on the phone So, you suffered for a long time - and, lo and behold! Finally the film was on the screen. And the cutouts all happily fell into place, and there were almost no bubbles.

But what is this?...

Who is there?

Home » Settings and instructions for Android and iOS » The glass does not stick to the edges. Solution to the problem According to manufacturers, displays modern smartphones protected by glass that is extremely scratch and damage resistant. Gorilla Glass is the most popular of these glasses, installed in most mid-range and high-end phones. price segment, but even this does not always save the display from damage.

In order to provide maximum protection, protective films or shockproof glass are most often used, less often - liquid protection, like Nano Liquid, as in the picture below. If, as a rule, no problems arise when installing a film or Nano liquid, certain difficulties may arise when gluing the protective glass. This is especially true for glass stickers on phones with rounded edges, the so-called 2.5D.

The glass does not stick to the edges. solution

Info

In this case, an unglued strip often forms along the edges of the glass, which greatly damages appearance phone. Below I will tell you how you can get rid of it. And so, you glued the glass, and around the edges it turned out like this: In this case, it’s Xiaomi phone Redmi Note 4X.

Let's try to fix the jambs. I know two methods - one artisanal, so to speak, and one industrial (I couldn’t find a more suitable word). #1 First method Chinese craftsmen do not sit idly by and invent all sorts of things that make our lives easier. To solve the problem, if the glass does not stick to the edges, they created special remedy. It's called Border Liquid or something like that and is a transparent gel that you use to coat the edge of the glass with a brush.

You can return the protective glass to the store

Otherwise, dust may immediately settle on it - and then you will have to spend a lot of time cleaning it. And again, tape will come to our aid. Hold the glass with one hand and apply a piece of tape to the speck with the other. After removing it, carefully aim at the screen so that all the glass cutouts exactly hit the right places.

Important

Once you are sure that the accessory fits correctly, you can release it. If dust gets somewhere on the edge, then you can only partially lift the glass, and not peel it off entirely. Here is the answer to the question: is it possible to glue the protective glass a second time?

Yes, you can, if you're careful. The main thing is that when uninstalling the glass you do not overdo it and break it. We recommend that you apply the protective accessory yourself only if you are truly confident in your abilities.

Can safety glass be reused?

This is necessary to prevent fingerprints and smudges from appearing on the surface of the screen.

• On broken glass, you should find the most intact corner where there are no chips or other damage (or there is, but in the smallest amount). You need to attach it there with a suction cup, pressing it against the screen.
• The corner to which the suction cup is glued must be pryed with a pick, spatula or suction cup so that the edge of the glass peels off. To do this, you need to simultaneously pull the suction cup slightly towards you.

  It is important not to overdo it so as not to rip off the screen before there is a gap between it and the glass! If you don’t have a suction cup at hand, you can simply smoothly insert the pick deeper into the resulting gap.

• As the glass peels off, you should deepen the pick/spatula/card.

How to re-glue film or glass

The main function of a smartphone's protective glass is to take the blow, protecting the touchscreen from damage. When this happens, it often becomes unusable, becoming covered with chips, cracks and other damage. The level of protection from this drops significantly; in addition, the view of the display deteriorates, and the smartphone loses its attractiveness.

To change the cover to a new one, you must first remove the broken protective glass from the phone. And here difficulties arise, about which we'll talk in the material. Read also: How to choose smart watch: a fashionable toy or useful gadget Precautions One thing to consider important point before removing the old protective glass from the phone.
Thanks to a perfectly smooth surface touch screen, the glass sticks to it very firmly. Usually it is held in place not by glue (although this also happens), but by electrostatic forces.

How to remove protective glass from your phone and stick a new one on

Somehow, mystically, a large speck appeared right in the center of the screen. "Oh no!" - you will think and, not knowing how to re-glue the protective film on touchscreen phone, give up this idea and go for new protection. And even if it seems that nothing can help the matter, we will try to calm you down and put you on the right path. In order to remove dust from under the protective film with your own hands, you will need ordinary tape.

You should start by sticking a piece of tape to the edge of the film to which the speck is closest. With its help you will lift the film. The second piece of tape should be ready. As soon as the speck is peeled off the screen, apply the tape to the adhesive side of the film.
Debris will move from one adhesive surface to another - and the film will be clean again. Just be careful not to accidentally introduce other debris. Otherwise, the procedure will have to be repeated.
Two flat surfaces They touch very firmly, making it impossible to remove the glass by simply lifting it with your fingernail. If you take the first available tool (like a knife), there is a risk of damaging the smartphone’s display and its case. One silicone suction cup is also not enough. If you stick to heavily damaged glass, a vacuum will not form inside underneath it, and when force is applied, it will come off.
If the grip is good, the suction cup will not come off, but another problem arises. The sensor is fixed in the case using double-sided adhesive tape or glue, the tensile strength of which is lower than that of the touchscreen and protective glass. If you overdo it, you can completely tear off the screen module, damaging its cables. Therefore, you need to act thoughtfully and consistently.

Is it possible to pull back the glass that is peeling off from the phone screen?

The consumer’s absence of a sales receipt or cash receipt or other document confirming payment for the goods does not deprive him of the opportunity to refer to witness testimony. If a similar product is not on sale on the day the consumer contacts the seller, the consumer has the right to refuse to fulfill the purchase and sale agreement and demand a refund of the amount of money paid for the specified product. The consumer's request for a refund of the amount of money paid for the specified product must be satisfied within three days from the date of return of the specified product. Since your product was used, you have lost the right to return it. Please ask a clarifying question in the special form below if you think the answer is incomplete.
The hand should be washed and dry, or wear a medical glove.

• Pull the tab of the protective film covering the adhesive surface and remove it. You need to keep the glass close to the smartphone so that when moving it in the air, microscopic dust particles do not stick.
• Place the glass a few millimeters from the touch screen, center and level it. You need to ensure that the holes for the speaker, camera, physical keys and other elements strictly match.
• Lower the protective glass onto the display, lightly pressing down and smoothing out any bubbles. They are easy to get rid of by pushing them to the edges with a dry cloth.
• Remove the top film that protects the glass during transportation.

1. Wipe the screen 2. Remove the film from the glass 3. Align it over the display 4. Press down 5. Remove the protective film from the top 6.

A smartphone is an expensive thing. Even when purchasing a budget-class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of the gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first one (represented by the hardware), then we can overcome external factors. We can protect our smartphone, if not from drowning, then certainly from mechanical impact. And the glass on the phone will help us with this. How to glue it? This is what we will talk about today.

Why do you need protective glass?

It is difficult to disagree with the fact that prolonged use of any smartphone does not imply the appearance of chips, cracks, scratches, or abrasions. This fate is typical not only for the side edges, top and bottom ends and back panel, but also for the front part. And there is perhaps the most important element - the smartphone screen. Protective glasses were invented precisely to protect the display of the device. You can also use film, but it has a lower protection factor. In any case, it is important to know how to properly glue protective glass to your phone.

What does it represent?

The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, it is rightfully considered to be a more reliable component, since it has a higher density compared to film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost more than film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is truly expensive. This level is different for everyone, but most users prefer to buy glass if their devices cost more than 10-15 thousand rubles. By purchasing, the user reduces the likelihood of damage to the main screen to almost zero, since the component described above will take the entire blow. Before we talk about how to glue it to a phone, I would like to focus on the advantages of the element.

Functions and useful properties

Not much can be said about the functions of protective glass. From its name it is clear why it was developed and what it is intended for. Either it’s a matter of features that you can talk about for hours. Their list, for example, includes resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after a demonstration test. For this you can use ordinary keys. Run the sharpened edges across the glass and you will see that it really doesn't leave marks.

The second useful property of safety glass is shock absorption. We have already mentioned this briefly above. A large number of smartphones, when dropped with the surface of the screen downwards, receive physical damage, up to the complete breaking of the display. With protective glass, this problem will be solved, since instead of the screen it will break. By the way, the word “break” here should also be understood a little differently from its usual meaning. The shards from the telephone protective glass do not scatter to the sides. Finally, we can note the fact that the glass holds very, very reliably. Especially if we compare it with a simplified element - film. Users who so often ask questions about how to properly glue glass to a phone can be glad to know that this operation does not require any special experience.

We are considering the package

A very large number of requests are related specifically to how to glue film (glass) to an iPhone 6 phone. However, it should be understood that the process is generally similar for other devices. Why then stop at specific models, if it is possible to describe the operation universally? First of all, let's see what is included in the package with protective glass? Different manufacturers offer different equipment, but usually it includes the glass itself, an alcohol wipe and a cloth made of a special material. If there is no cloth or napkin, then you can use improvised analogues, this is not important.

Glass on a phone: how to glue it? Preparing the surface

If you have previously installed film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then hook the element by the edge. To prevent greasy stains from appearing on the glass, you should thoroughly wash your hands and dry them in advance. By the way, preparing the workplace remains an important step. You need a flat horizontal surface and powerful lighting. This could be, for example, a table. Lighting will help avoid the occurrence of unnoticed stains and dusty areas. So what does it take to integrate glass on your phone? How to glue it? The operation will only be correct if the “bare” screen is treated in advance.

Why is cleaning necessary?

The screen, freed from film or glass, should be cleaned with a damp disc or alcohol wipe soaked in alcohol. The screen should be wiped thoroughly to ensure that no dirt remains on it. After this, you should wipe it with a special cloth, if it is included in the kit. If it is not there, then you need to find an analogue. Now it's time to put the glass on the phone. How to glue? Let's find out further.

The most important stage

There is a special film on the adhesive side of the glass. It needs to be removed. After this, we apply the glass itself to the screen. Care should be taken to ensure that it is aligned with the edges of the device and aligned with the speaker and control elements. By the way, you need to remember that you can only hold the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply lower the component onto the screen. The glass will stick on its own. Great, now we know how to glue glass to a phone.

Are there any disadvantages

Yes, like other elements, protective glass has some disadvantages. Some users who are interested in the topic may think that the main disadvantage is the indicative complexity of the integration process. Like, if you stick it wrong the first time, then you can’t do anything later. In fact, this is not what we are talking about now. The main disadvantage of this component is the fact that the device on which you will glue it will become bulkier and heavier. However, if this does not bother you, and you are not very sensitive to the weight and dimensions of the phone, but want to protect it, then you can contact the salons cellular communications. They will offer not only the best products, but for additional money they will be able to glue glass with high quality.

Pitfalls and tricks

Most users are afraid of air bubbles. Or rather, they will remain. Few people can boast that they glue the protective glass carefully the first time, and there are no bubbles. However, they can be easily dealt with with a dry cloth. The procedure is terribly simple: we simply squeeze out the bubbles from the center to the periphery. The ability to glue protective glass will save money, which is charged for this procedure in mobile phone stores.

Prices

Nowadays, safety glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options are represented mainly by Chinese firms, as one might expect. However, they are not that bad. Glass from different brands differs from each other only in the degree of hardening. However, one should not think that glass is from Chinese company will not provide the required degree of security. Now that we have learned how to glue tempered glass to a phone, we can move on from words to action.

01.10.2017 17:00:00

What is safety glass

The main function of protective glass is that it protects the fragile screen from various mechanical damages. The glass is flexible enough to absorb direct impacts. Phone protective glass is chemically treated and tempered, so it protects the screen from chips, cracks and scratches much better than a protective film. Glass is superior to film, primarily in thickness and hardness. For example, there are glasses with a thickness of 0.5 millimeters. According to the Mohs scale, the hardness value of protective glass is 9 H.

The Mohs scale includes 10 reference materials from talc to diamond to determine the hardness of a material. Thus, 9 H (Hardness) means that the protective glass on the phone is very close in hardness to the most indestructible mineral.

The protective glass can be easily scratched with a knife or keys; such mechanical action will not leave any traces. Even from a direct blow with a heavy object, such as a hammer, the glass will not shatter into pieces, but will only become covered with cracks. In this case, the phone itself will remain intact.

The protective glass has a five-layer structure:

• silicone base
• containment layer
• anti-glare layer
• protective layer
• oleophobic coating

The glass installed on the phone does not affect color rendering and does not interfere with the conduction of electrostatic impulses from the fingers to the screen. However, it is worth considering that after installing the glass, the phone may gain a little weight.

The issue price for protective glass ranges from 500 to 3000 rubles, depending on the manufacturer.

In order to stick a protective glass on your phone, you will need:

• Wet wipe
• Dry cloth
• Screen cleaning liquid
• Scotch
• Glass

Stage 1: Preparing the work surface

Before applying the protective glass to your phone, it is important to clean the work surface of the table. Before doing this, wash your hands with soap and dry. The table must be thoroughly wiped, as the smallest dust caught between the glass and the screen will negate all efforts. It is also advisable to set good lighting so as not to miss stains or dust particles.

Other Fly smartphones
All Fly phone models can be found in our online store.

Step 2: Clear the screen

After the table is prepared, you need to clean the phone screen itself from grease stains and dust. To do this, you can take a regular napkin and moisten it in a special liquid for displays and monitors. Or take a special one wet wipe, thoroughly wipe the screen, and then walk over the screen with a dry cloth. Dust can also be removed with regular tape. After applying the adhesive tape, the screen also needs to be thoroughly wiped.

Stage 3: Installing glass

Now you can glue the protection. The glass must be removed from the packaging and the film carefully removed from it. Holding the glass by the edges, you should accurately fit it to the phone screen. Then lower the glass and press it lightly with a dry cloth.

Step 4: Removing Bubbles and Dust

Even if you glue the protective glass onto your phone evenly, it is not always possible to avoid small “jambs”. For example, small air bubbles may form between the glass and the screen. In this case, use a dry cloth to press the screen towards the edges to remove any bubbles. If, despite all cleaning efforts, dust still gets under the glass, carefully bend the edge of the glass and remove the dust with tape or a special dust collector.

You can also watch detailed video instructions for installing glass on your phone:

Now you know how to apply protective glass at home. Please note that the entire process may take about half an hour. It is better to set aside free time so as not to rush and do everything carefully.

For the next lesson we will prepare detailed instructions on gluing protective film to the screen. Do not miss!

Hi all. I recently encountered a problem where the protective glass from the top of the screen began to peel off. I didn’t really want to buy a new one because of what seemed like such a small thing, and it’s not film; it costs a little more. Moreover, it is intact, and it only lasted for a couple of weeks, so it’s not a big deal... I think this situation is familiar to many :)

So I surfed the internet, looking for something simple and effective way re-stick the protective glass and decided to share with you everything I found. I will say that I searched for a long time, there is a lot of nonsense, well, I think you are familiar with it :) plus, besides, there are a lot of articles about nothing, that is, empty and not answering the question. But I found more than one method. I tried only one (the first one), but I’ll also add other methods that I found, maybe it will be useful to someone.

I repeat that I have a smartphone with a 2.5D screen (for those interested, this is the Meizu M6 Note), that is, with rounded corners, and I bought the same glass for myself. As for whether these methods are suitable for ordinary 2D, that is, simply direct screens, I cannot judge. As far as I know, in the case of straight screens, the glass just needs to be thoroughly cleaned of debris and greasy stains, for example, using a cleaning agent for LCD screens and (or) regular stationery tape, you can also remove dust particles from the screen and glass and it will stay on as is. statics. I've seen advice where they say to apply alcohol and stick it on. Well, I don’t know, I won’t advise anything, decide for yourself...

In the case of 2.5D glass, there is an adhesive base applied in the upper and lower parts, due to which it holds.

Yes, and I have the glass itself with black stripes at the top and bottom, like this:

So, let's go, the first method:

1. The first method is sugar syrup, yes, exactly sugar syrup :)

The sugar solution is made as follows:

Take a teaspoon of sugar or 1 cube and dissolve it in 2-3 tablespoons of hot water.

If the glass, like mine, has only partially come off, and no debris has yet accumulated there, if a speck has gotten in, we remove it with a toothpick, carefully prying it off on one side... Then, again with the same toothpick, a fingernail, or whatever is convenient for you, we pry it off it, not too much, very carefully, you can’t bend it - it will become deformed and all you have to do is throw it away, so, pry it up and drop one or two or three drops of sugar syrup under the corner of the glass. I used a toothpick for this - I used my fingernail to pry up the glass, and with the toothpick I transferred droplets of the solution to the phone screen. You can use a syringe, but be very careful not to scratch the display itself with the needle.

Next, we press the glass and dry it so that all the water completely evaporates; a regular household hair dryer is suitable for this task. It’s not very convenient to do this alone, I did this: I turned on the hairdryer and put it on the table, and held the phone in my hands and pressed it...

If it comes off completely

First of all, we thoroughly clean the phone screen and protective glass from dust particles and other debris. The screen can be wiped with alcohol and then polished with a cloth for glasses.

The glass itself can be cleaned like this:

1. Carefully seal the adhesive layer with regular tape and wash it with slightly soapy warm water.
2. The second way is to take masking tape and go over the entire screen, collecting all the debris. The worst thing to clean is the adhesive base itself. You can try it with regular stationery tape, this is what it looks like:

We clean the protective glass and adhesive layer from debris

IMPORTANT!!! The glass itself is the transparent part; there is no need to clean it with tape. It can be easily cleaned with napkins or, in extreme cases, alcohol.

I personally tested this option with sugar syrup and it worked great. The glass stuck tightly and held on perfectly... But not for long... And the reason for this is the bumper or cover, whichever is more convenient for you. It was because of the bumper that the first time it came off, at the top, and after gluing it with sugar syrup, it also came off after about a week….

But the option is working. Give it a try.

Option for gluing protective glass No. 2

We still clean the glass with water/wipes/soap/alcohol, whichever is closer...

Then, we go over the adhesive base several times with stationery tape and over the protective screen (from the adhesive side) and over the phone screen, and glue it...

Method No. 3

Hair fixation spray. Spray the varnish into some container, and then apply it to our screen with the same toothpick or syringe.

Method No. 4

There is such a liquid for filling the 2.5D air gap - it’s called Liquid liquid. This is what it looks like:

This is not glue, but a fatty substance, like a lubricant, which may help in our work, although not exactly :)

That's it. This is all I could find on the Internet. Try it for your health.

Good luck to all. See you soon.

According to manufacturers, the displays of modern smartphones are protected by glass that is extremely resistant to scratches and damage. Gorilla Glass- the most popular of these glasses, installed in most phones in the mid- and high-price segments, but even it does not always save the display from damage. In order to provide maximum protection, shockproof glass is most often used, or, less often, liquid protection, such as , as in the picture below.

If, as a rule, no problems arise when installing a film or Nano liquid, certain difficulties may arise when gluing the protective glass. This is especially true for glass stickers on phones with rounded edges, the so-called 2.5D. In this case, an unglued strip often forms along the edges of the glass, which greatly spoils the appearance of the phone. Below I will tell you how you can get rid of it.

What to do if the glass does not stick at the edges

And so, you glued the glass, and around the edges you got this mess:

In this case, this is the Xiaomi Redmi Note 4X phone. Let's try to fix the jambs.

I know two methods - one artisanal, so to speak, and one industrial (I couldn’t find a more suitable word).

#1 First method

Chinese craftsmen do not sit idly by and invent all sorts of things that make our lives easier. To solve the problem, if the glass does not stick to the edges, a special tool was created in the Middle Kingdom. It's called Border Liquid or something like that and is a transparent gel that you use to coat the edge of the glass with a brush.

And a short video on how to use all this:

#2 Second method

If you don’t have money for a miracle remedy or you just don’t want to wait until it arrives from China, you can use the means at hand.

We will need: a napkin, a thin brush and a little vegetable oil or glycerin.

Carefully apply the glycerin to the edge of the glass, making sure it gets into the joint and fills any voids. When finished, remove excess with a napkin. The smaller the initial width of the white unglued strip, the better the final result will be.

These are the most simple ways solve the problem if the glass does not stick to the edges. Try it and post your results in the comments.