Author Oleg asked a question in the section Other languages ​​and technologies

How to do it in Photoshop dotted line? and got the best answer

Answer from Dagpress-Media[guru]
Select the Pencil tool. Double-click the second smallest brush in the Brushes palette. Intervals (Spacing) up to ~250%. Now just draw a line with your pencil and you will get a dotted line. To make a line straight, hold down the SHIFT key while you draw the line. Another way: click at the starting point, then press SHIFT key V end point your line. Photoshop will create a dotted line between these two points. To get a variety of dotted lines, you can change the brush size and increase the spacing. Also, you can download a set of square brushes.
Link to lesson.ru/2011/11/blog-post_2336.html

Answer from Lud@Mila[guru]
In Corel this is done through the outline (outline pen). maybe in Photoshop, something similar.

Answer from Fiery[guru]
can be drawn in Illustrator, copied and pasted into Photoshop

Answer from Akimov Gleb[guru]
And CS6 already supports this feature; you can immediately select a ready-made dotted stroke.

Photoshop is not a program for creating drawings, but still sometimes there is a need to depict drawing elements.

In this tutorial I will show you how to make a dotted line in Photoshop.

There is no special tool for creating dotted lines in the program, so we will create it ourselves. This tool will be a brush.

First you need to create one element, that is, a dotted line.

Create a new document of any size, preferably smaller, and fill the background with white. This is important, otherwise nothing will work.

Take the tool "Rectangle" and configure it as shown in the pictures below:

Choose the dotted line sizes to suit your needs.

Then click anywhere on the white canvas and, in the dialog box that opens, click OK.

Our figure will appear on the canvas. Don't worry if it turns out to be very small in relation to the canvas - it doesn't matter at all.

Give the brush a name and click OK.

The tool is ready, let's take it for a test drive.

Choosing a tool "Brush" and in the brushes palette we look for our dotted line.

Then click F5 and in the window that opens, set up the brush.

First of all, we are interested in intervals. Grab the corresponding slider and drag it to the right until gaps appear between the strokes.

Let's try to draw a line.

Since we most likely need a straight line, we will extend a guide from the ruler (horizontal or vertical, whichever you want).

Then use the brush to place the first point on the guide and, without releasing the mouse button, hold down SHIFT and put the second point.

You can hide and show guides using the keys CTRL+H.

If you have a steady hand, then the line can be drawn without a key SHIFT.

To draw vertical lines, you need to make one more adjustment.

Press the key again F5 and we see this tool:

With its help, we can rotate the dotted line to any angle. For vertical line it will be 90 degrees. It is not difficult to guess that in this way you can draw dotted lines in any direction.

Here's a simple way we learned how to draw dotted lines in Photoshop.

Let me remind you that your brush or pencil should already be set up. After selecting the tool, click OK, and points will appear on the contour. Dots made with a brush turn out to be somewhat blurry, so after applying the dots, it won’t hurt to apply the Sharpen Edges filter and select the settings individually.

Here is an example of a drawing obtained using the above-described body movements:

Were applied following settings brushes:
Text: type - pencil size (Size) 3 px, Hardness (Hardness) 100%, Spacing (Spacing) 180%
Underline: type - brush, size (Size) 3 px, hardness (Hardness) 100%, spacing (Spacing) 205%
Frame: type - pencil, size (Size) 6 px, hardness (Hardness) 100%, spacing (Spacing) 180%

Well, we seem to have sorted out the frames of dots.

Creating frames from dotted lines

Rectangular frames, i.e. consisting of vertical and horizontal lines do not cause any problems.
You can paint them using a rectangular brush from the default Photoshop set. Open the Brushes control panel and load them as shown in the image:

With this brush you can horizontal line. But it won’t work vertically, or rather, it will work, but it won’t be pretty:

To create a vertical broken line, you need to rotate the brush mark by 90 or 270 degrees:

Now you can safely draw a vertical dashed line:

But if I need a dotted line in a circle or along any curve, then this method is no longer suitable. If you ask the world mind, then he, the mind, will advise not to engage in nonsense with dotted lines in Photoshop, but to use Adobe Illustrator, create a layer in it with the right line, and transfer it to Photoshop. I don't use Illustrator, and I need to create a circular dotted line in Photoshop. It turns out there is a way, and it’s quite simple. It took me ten minutes to invent it.

Select a round brush, set the print diameter to 9 pixels, and the spacing to 170%. We create an outline and trace the outline, as in the case of dots.
Next, right-click on the outline and select “Make Selection” with a feathering radius of 0. Here is an enlarged fragment of the drawing:

Then go to the tab Selection --> Modification --> Border (Select --> Modify --> Border), set the width to one or two pixels.

Now you need to invert the selected area by pressing the key combination Ctrl+Shift+I. We remove unnecessary things by pressing the Delete key.
I ended up with a nice dotted circle like this:

There are, of course, small artifacts left here and there, but they can be corrected with a few clicks of an eraser.
Thus, a dotted line can be drawn on any contour, for example, circle

Lifehack on how to create a dotted line in Photoshop- Every second PC user is familiar with Photoshop. For many users, this is exclusively a program for editing photo cards, but with the help photoshop it is possible to depict drawing elements.

If there is a need to create a dotted line, then you should use a good and faithful retoucher assistant - a brush. The first action is to create one element - a dotted line. You should open a new document of any size and fill it with white. This is a necessary step to achieve the desired result. Then select the tool " Rectangle"and set the parameters according to the recommendations in the images below:

The dotted line size can be adjusted as you need. Next, by clicking on the white sheet, a dialog box opens where the action is confirmed. The constructed rectangle figure appears on the screen. Don't panic if its size is too small in relation to the sheet. It's not critical. Then in the menu " Editing» - « Define brush"You need to enter a name and confirm the action by clicking OK.

Thus, the tool was built " Dotted line"and you can try to create a dotted line
line.

1) Select " Brush" and among the palette we find the created tool.
2) Press the key F5 and determine the intervals between the dotted lines. (use a special slider to adjust the distance).
3) A guide line (horizontal, vertical) will be a good helper.

Then you should place the brush at the beginning of the guide, and using the button Shift, without releasing the mouse, continue the dotted line. You can hide or show orthogonality by pressing the combination CTRL+H. If you do not doubt your skills, then you can draw a guide without using SHIFT. To construct vertical axes, you should perform a number of actions: press the key F5 and see the image as in the picture.