Often there are archives that were encrypted with the WinRar archiver program. This encryption method is easily bypassed by advanced users. In this article, I will tell you how to crack a password-encrypted archive. And for this you do not need any special skills, just one small, easy-to-use program is enough.

How to hack an archive with Advanced Archive Password Recovery

Advanced Archive Password Recovery is a program that will help you decrypt any archive corrupted by WinRar. Differs in ease of use, Russian interface and speed of work.

Before hacking the archive, download this program to your computer and install it. In the archive I enclose the activation key, which will be needed during installation.

Advanced Archive Password Recovery is simple. She picks various combinations of passwords until she finds the right one. When the correct one is found, a message about it appears. It can take a significant amount of time for the program to find the correct password, depending on its complexity. To speed up the process, you can reduce the pick range by specifying, for example, use only numbers, only letters, a length range, or other options.

Before hacking the archive, run the downloaded program and do the basic settings.

So, in the “Symbol Set” settings block, select which symbols you want to use in the selection. For example, I'm going to open an archive that I password-protected myself, and I know for sure that the password contained only numbers, so I check the "All numbers" box.

On the avi1 service, you can purchase active and live followers on Instagram at one of the cheapest prices on the network, also available for ordering: likes, views, comments and bots on Instagram

If you know what the first and last characters of the password were, then you can specify them in the "Start with" and "End" lines. For example, I remember exactly that my password ended in 3.

Then you can go to the "Length" tab and set the maximum and minimum length of the selected password. Let's say from 1 to 4.

Adjusting the length ranges and characters will help reduce the password guessing time. The number of selected keys is significantly reduced, from which the result appears faster.

So, the settings are set. Now, in order to hack the archive, you need to click the "Open" button at the top, select the archive on your computer and wait for the program to pick up the password itself. If the password is complex, then it will take a long time.

At the end, you will see a message containing the password for the archive. It remains only to use it and you can unpack the files.

Article content:

If you are faced with the task of simple, but at the same time reliable transfer of confidential information to another person, then consider using a password-protected archive. You can also set a password for the archive in order to protect important information on your computer or laptop. It is quite difficult to crack a password even using paid programs. Often, the whole point of the work of programs designed to crack the password of an archive is reduced to a simple enumeration of numbers, letters and words. That's why good password(from eight characters long, with numbers, letters, and symbols like ^ or $) is almost impossible to hack.

In order to set our own password for the archive, we will use two archivers: WinRAR and 7-Zip. These programs are very popular and familiar to a wide range of users. Our detailed guide will not leave you with any questions about setting a password for the archive and you will be able to protect any confidential information on your car.

How to put a password on the WinRAR archive

Most computer owners are accustomed to using WinRAR program. This archiver is paid, but the whole point of its paid is that after 40 days of free use, a message will begin to appear asking you to buy a license. The functional part of the program does not suffer from this in any way. Using the mouse, we click on the file that we want to archive and securely protect with a password, and then select the “Add to archive” item.

After these steps, a window will appear on the screen. WinRAR archiver. You need to come up with and enter the name of the future archive (if this is not done, the default name will be used, which matches the name of the archived file). Then click on "Set Password" old version It's under the "Advanced" tab.

Next, in the appropriate fields, enter twice strong password(There can be no question of any 123 or qwerty, since such passwords are cracked very quickly). If you are afraid to forget the password to the archive, then write it down somewhere in a notepad or text file.

We also strongly recommend that you check the box next to “Encrypt file names”. If this checkbox is not checked, then your password-protected archive can be opened and you can see the names of the folders and files that are in it. It will be impossible to download them or open them without knowing the password, but the names will be displayed, which is unacceptable in some situations. In order to set a password for the archive, click "OK".

After that, in the folder where the data that we archived was located, an archive with a password will appear. You can safely write it to a USB flash drive or send it to someone by mail without fear for the safety of the information in it. After creating the archive original file can be deleted.

To unzip the data, right-click on the archive and select "Extract to current folder". Enter your password and click OK.

Now you know how to put a password on the WinRAR archive. Next, we will analyze the process of setting a password using 7-Zip.

How to put a password on a 7-Zip archive

Unfortunately, the 7-Zip archiver is less popular among users, although it is completely free and offers an open source. To set your password, launch 7-Zip and select the files or folders you want to zip. Select the files and click on the "Add" button.

A window will appear on the screen in which you need to specify the name of the archive, enter the password twice and check the box next to the “Encrypt file names” item. Click “OK” to create the archive.

Unzipping is also easy. Double-click to open the archive and enter the password.

Conclusion

As you can see, absolutely any user can set a password for the archive. It is very comfortable and useful feature to protect important files and documents. It can be used in various situations.

Was this article helpful to you?

Yes Not

0 characters

send a message

Today I will tell you how to set a password for the WinRar archive. Not so long ago I already wrote a similar article, but it was about installing . Not everyone uses 7Zip, many still (since the late 90s) use the WinRar archiver.

I will not write why you should not use WinRar, but the mere fact that this archiver is paid should make you think. Well, it's clear that not everyone pays money for a license, but uses broken versions, but why if there are free analogues?

In general, let's not talk about the bad, if it so happened that you have the WinRar archiver installed and you need to set a password for the archive, this article is for you.

If you still do not have this archiver and want to use it, you can download WinRAR on the official website. After that, install it and proceed directly to password-protecting the archive.

Select the folder or file you need that you want to archive with a password and right-click on it and select "Add to archive ..."

In the options window, specify the type of archive (I left RAR) and click on the “Set password” button

Enter the password twice and check the “Encrypt file names” box, then click “OK”

In the archive parameters window, also click “OK”

Now try to open the archive you created, if everything is done correctly, you will be prompted to enter a password during opening

If the password is entered incorrectly, you will see an error message.

and only if you enter the password correctly, you will see the contents of the archive

I want to give you a little warning. This type protection is not reliable. Password-protected archives are fairly easy to hack. So I advise you not to store confidential information in this form and not to transfer it to third parties.

WinRAR allows you to create both standard zip archives and your own unique format (rar). The archiving and password setting process is almost identical; rar, however, has an additional option available, which will be discussed below.

Setting a password for a new archive

Open WinRAR and click the "Add" button.

Select the archive format, then click the "Set Password" button:

Enter it twice (I advise you to activate the "Show password" item, because before clicking "OK" it is better to check if you have sealed it. Otherwise, you will not be able to open the archive later):

Optionally, you can enable the "Encrypt file names" option: if such an archive is opened, then without entering a password, no one will even be able to read the names of folders and documents. However, this option is only available for .rar archives.

Click OK. The password-protected archive is ready.

Now, when trying to extract its contents, the following window will appear:

If the archive has already been created and needs to be protected

In such a situation, you need to add any file to it, which can then be safely deleted.

The procedure is the same: open the archive, click "Add", selecting a file to add, and at this moment a window similar to creating a new archive will appear again. Press the button again to password-protect, and you can set the protection.

Conclusion

The only disadvantage of WinRAR is that the program is paid. Therefore, it makes sense to use it only if you need to have an archive of exactly .rar format. In working with other options (zip and others), free analogues like 7Zip are perfect, which also allow you to set a password and securely protect the content.

WinRAR is one of the most the best programs archiving files. In order for the created archive to be viewed only by you or persons trusted by you, the functionality of this program has the ability to set a password for the archive being created to protect the contents. Below is a detailed guide on how to put a password on a WinRAR archive.

Winrar allows you to set a password before and after archiving, which distinguishes this program from other similar ones.

To password-protect a RAR archive, you first need to run the program itself. After launch, the following dialog box will appear:

In the system file explorer that opens, you need to find the files that we want to archive, and select them with the mouse cursor with the left button pressed right in this window:

Suppose we opened some folder with photos. After selecting the files, it should look like this:

In it, you need to click the sub-item "Add files to the archive" (or press the hot key combination Alt + A). As a result of these actions, the following window will appear:

In this window, you can rename the future archive, select the archiving format, compression method, and also set the size of the archive part when splitting it into several files. Read more lesson" ". Next, we will dwell in more detail on setting a password in Winrar. On the "General" tab or on the "Advanced" tab (depending on the version of the program), click the "Set password" button:

After clicking, another window will appear in which you need to check the option "Display password as you type" (this will allow you to see the password you enter), and then enter the password twice (or once if the previous option was selected) and press the button "OK". You can also check the "Encrypt file names" option, which will hide the real names of files in the archive:

Note! You can open files that will be archived by Winrar without first launching WinRAR itself. Just highlight necessary files in folder:

And then, without removing the selection from them, move the cursor over them and click right button mice. As a result, the following context menu will pop up:

In this menu, you must select and click the item "Add to archive ...". As a result, exactly the same dialog box as described above will appear:

The next steps will be the same.

And now let's consider the option of how to put a password on an existing WinRAR archive. Let's select the RAR archive we need through the program explorer:

Click "Add Files to Archive". We set the password, as we did above, in the "Compression method" item, select the "No compression" value and click the "OK" button:

As a result, the archive will have a password.