Beeline Smart Box router firmware. Smart Box from Beeline Smart box beeline firmware

Changing the Internet provider is not a frequent thing, but sometimes it is very necessary. Especially lately it concerns Beeline subscribers. Having gained a large customer base in due time, the quality of services gradually began to fall compared to developing competitors. However, when changing the operator, one problem arises. The fact is that Beeline, along with the tariff package, distributed everywhere its branded Smart Box One routers, which were quite good for those times, which were designed to use the Internet only in their network. However, there is a way to save money - flash the Beeline Smart Box router for all operators. How? Now I'll tell you!

Configuring the Beeline Smart Box router for all operators

Today you can find a bunch of ads on Avito selling Smart Box - at ridiculous prices and in excellent condition with a complete set and box. The fact is that few people know that the Beeline router is easy to set up to work with any provider. It does not even require a complicated firmware for beginners.

The secret is that when we enter the control panel under the default administrator account with the login and password admin / admin, which are indicated on the sticker, the WAN port setting, which is just responsible for choosing the type of Internet connection, is blocked on L2TP for Beeline.

To unlock it, you just need to log into the router from under the super-user.

To do this, open the login page http://192.168.1.1 in the browser and use the pair:

Login - SuperUser
Password — Beeline$martB0x

If this data is not suitable, then we try to indicate the serial number of the router indicated on the sticker as a password - it looks like “SFXXXXXXXXXX”.

If you are, then read our other article, which analyzes possible errors and suggests options for correcting them.

After authorization in the "Advanced settings" section in the "Other" menu, we get full access to all configurations, including the Internet, without any firmware. There are now all types of connections, including through a 3G modem.

Changing the Internet provider is not a frequent thing, but sometimes it is very necessary. Especially lately it concerns Beeline subscribers. Having gained a large customer base in due time, the quality of services gradually began to fall compared to developing competitors. However, when changing the operator, one problem arises. The fact is that Beeline, along with the tariff package, distributed its branded routers, which were quite good for those times, everywhere. Smart Box One who are pledged to use the Internet only in their network. However, there is a way to save money - flash Beeline Smart Box router for all operators. How? Now I'll tell you!

Configuring the Beeline Smart Box router for all operators

To unlock it, you just need to log into the router from under the super-user.

To do this, open the login page http://192.168.1.1 in the browser and use the pair:

Login - SuperUser
Password - Beeline$martB0x

If this data is not suitable, then we try to indicate the serial number of the router indicated on the sticker as a password - it looks like “SFXXXXXXXXXX”.

Step 1

Connect the network cable of your computer to any of the 4 LAN ports of the router. The cable that our installers extended to your apartment must be connected to the WAN port.

Step 2

Open a browser and enter 192.168.1.1 in the address bar. You will be taken to the welcome page. Click the Continue button.

Step 3

The router will prompt you to enter a username and password. Enter admin in the first field and admin in the second. Click the Continue button.

Step 4

You will be taken to the main menu of the router. Select Quick Setup.

Step 5

You will be taken to the router's quick setup page. It consists of four sections, consider the purpose of each of them:
1) "Home Internet" - in this section, you need to enter any number or letter in the "Login" and "Password" fields (the setting does not affect anything).
2) "Wi-Fi network of the router" - here you can configure the wireless network of your router.

To set up a network in the 2.4 GHz frequency band, enter the name of your network in the 2 GHz network name field, for example my_wifi2G, and in the Password field enter the password to access it. Please note that the password must contain at least 8 characters.
To set up a network in the 5 GHz frequency band, enter the name of your network in the 5 GHz network name field, for example my_wifi5G, and in the Password field enter the password to access it. Please note that the password must contain at least 8 characters.

3) "Guest Wi-Fi network" - here you can configure the guest wireless network of your router.

4) Beeline TV - if you have activated the Beeline TV service, you need to select the port of the router to which you will connect the set-top box. If you are watching live channels on your computer or using the Xbox 360, then you do not need to configure anything.
To save your settings, click the Save button.

Step 6

Congratulations, you have fully configured the router to work in the Beeline network.

Be careful when following the instructions in this section. In case of an error in the actions, you will need to visit the service center to restore the device.

Step 1

Download firmware. Current firmware version - 2.0.22 (14.5 MB)

Step 2

In your browser, open the page at 192.168.1.1

Step 3

In the window that opens, enter the username admin and password admin.

Step 4

Click the "Continue" button.

Step 5

Click on the "Advanced Settings" button.

Step 6

Select "Others" from the top menu.

Step 7

A page with the main settings of the router will open. In the left menu, select "Software Update".

Click the "Select File" button and select the location of the firmware file you downloaded earlier.

Step 8

After that, click the "Perform Update" button

Step 9

Wait while the router performs a firmware update, this process takes approximately 5 minutes, after which the router must be rebooted and it will be ready for use.

Use a hard reset if you need to configure the device again (delete all user settings), you cannot access the web page of the router settings interface, the Internet connection has not been established after setting up the router, or the password for accessing it has been lost.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

On the body of the device there is an in-depth RESET button (RESET, RESTORE), which allows you to reset the settings to the factory settings. You can find the RESET button (RESET, RESTORE) on the same side of the router case where the rest of the connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset your router to factory settings, follow these steps:
Power on the router and wait for the device to fully boot. Press the RESET, RESTORE button using a pointed, thin object (such as a paperclip) for 30 seconds, then release the button.
After that, the router will reboot with default settings (factory settings) and you will need to configure it again.

The Beeline provider, in order to keep up with others, decided to release its own router, in which the connection to the networks of this operator is configured with a couple of clicks. Offered under the name Smart Box, the router is based on a unified Realtek 8197D processor and is equipped with 64 MB of memory.

In fact, all claims that may be related to the operation of this device are more related to the firmware. We hope it will be corrected soon. Consider how the Beeline proprietary router needs to be configured, and also how to update the firmware in it.

Router "Beeline Smart Box"

On the rear panel, in addition to the standard set of ports and the power button, you can see the mode switch. Router mode is activated when the toggle switch is in the up position. The second mode is the "switch".

We will look at how to set up a connection with the Beeline provider. To do this, you can connect a computer to the router via a patch cord or via a wireless network (which works in mixed b / g / n mode, it has been given the name “Smart_box-…”). In conclusion, it will be considered how to update the proprietary firmware. The firmware version, current at the time of the creation of the review, is 2.0.19.

Connection setup

It is easy to understand that you need to connect the Beeline cable connector to the WAN port. You can access the web interface of the router from a wired or Wi-Fi network (the latter works without a password).

The actions should be as follows: after connecting all the cables, we supply power to the router, wait 1 minute, open the web interface. The requirement for setting up a network card is to set the "automatic" mode:

Setting up a wired connection on a computer

On wireless cards, they also include a similar mode (“auto” DNS and IP). The parameter values that are needed to open the web interface are given below.

How to open the GUI?

If a wired network is used to configure the router, the patch cord is connected to one of the LAN ports. In order for the network card to receive IP and DNS from the router, you need to right-click on the connection icon and click "Fix". You can connect to a wireless network without a password, its name is "Smart_box-XXXXXX".

Recall that the router is loaded for at least a minute. The GUI address of the Smart Box is standard and equals 192.168.1.1. The default password is the same as the login, this is the word admin:

Setting up a connection with Beeline

Being on the start tab of the interface, click the "Quick Setup" button. The following page will open:

Connection setup

Here you need to set the parameters:

Login of the subscriber of the form "089XXXXXX" (read the contract)
Subscriber password - what is specified in the contract
"Network name" - you can leave it as it is
"Password" - the value of the Wi-Fi password (you can not use it at first)
We will not turn on the guest Wi-Fi network
Choose one LAN port for the set-top box, if required (just not the one that is used now)
Click "Save"

Firmware update

The built-in program for the router, that is, the firmware, can be downloaded from the Beeline official website. The firmware file takes 16 or 17 megabytes. Save it to your desktop. Next, we will look at how to reinstall the firmware in the Smart Box router, and most importantly, how not to make it worse.

Preliminary actions

It is best to perform a factory reset before updating the firmware. We turn on the router, wait 2 minutes, press the reset button with a paperclip (the button must be held for 10-15 seconds). The LEDs should blink, then the router will boot up again (but with the "default" settings).

We will install the firmware by connecting the router to the PC via a wired network. It is necessary. Reinstalling the software is performed for the sole purpose of ridding the router of the "bugs" of the previous firmware. If everything works well, you don't need to reinstall anything.

It is important to know that during the transfer of the firmware file, you must not turn off the power or disconnect the connection between devices. After the installation is completed, it is better to wait another 5 minutes, and only then briefly press reset.

Updating the firmware via the web interface

Go to the configuration GUI as discussed above. On the start tab, click the "Advanced Settings" button. Then, select the "Other" tab -\u003e "Software Update":

Firmware reinstallation

Sequencing:

Click "Select a file", find the file on the "desktop" and click "Open"
Check the connection again, click "Perform update"
Wait for the reinstallation to complete
Wait 5-6 minutes
Briefly press the reset button on the router

Successful setup!

) () () ()

7 Feb 2016

04:36 am - Beeline smartbox pro, SuperUser password cracking.

Beeline smartbox pro has a tr-069 backdoor, the presence of which beeline does not deny, it refuses to remove it, claiming that its removal is not provided by the firmware. In fact, it is really possible to delete it, you just need to log in under the name SuperUser (password Beeline$martB0xPr0). Then almost unlimited possibilities for setting up for any provider will open.

Conclusions.
1. Disadvantages of Beeline smartbox pro based on all previous posts:
- no heatsinks on microcircuits;
- no torrent rocker;
-does not know how to format and check for errors connected usb drives;
-poor support
-lack of alternative firmware;
-there is a tr-069 backdoor that a normal user will not be able to disable;
- all antennas are internal
- wan connector only 100 megabits.

2. The router is made on microcircuits of 2013 development: mt7602en + mt7612en + mt7621at. This chipset is possessed by: Zyxel Keenetic Ultra II (10,828 rubles), D-Link DIR-860L (9,160 rubles), Linksys RE6500 (11,692 rubles), ZBT WG2626 (7,013 rubles). But they all have external antennas, radiators, are not locked for a specific operator and have a gigabit wan input. Therefore, it makes sense to buy Beeline smartbox pro only under the "year as a gift" promotion, when you pay only for the Internet.

Comments:

That's exactly what I thought about the stock when I bought it.
But an unpleasant crap turned out - it does not give a speed of more than 70 even with a direct cable connection to the router. At the same time, an honest hundred is brought into the apartment, a direct WAN connection to the laptop bypassing the router shows this.

Now I look at it and think what to do.
Why can he cut speed like that?

Joined by promotion "House of the 21st century+" and they brought you to the apartment on the day of connection Wi-Fi router Smart Box. As a rule, all equipment settings are carried out by the installer when connecting. There are situations when, for some reason, your router settings have gone wrong and you need to reconfigure your Smart Box. For this, instructions are given below.

The main parameters of the Smart Box router:

Router address - 192.168.1.1
Latest firmware - 2.0.11
Username to access the device - admin
Password to access the device - admin
Network name (SSID) - Smart_box-XXXXXX (where X are symbols unique for each device)
Wireless network key (Wi-Fi) by default - no key

Connecting a Smart Box Router

1. Insert the cable brought into the apartment by our installers into the WAN port, and connect the computer with a patch cord (cable) from the router kit to any of the LAN ports. You can also connect your computer to a router via a Wi-Fi network, but at the first stage it is still better to use a cable connection.

Connection setup

2. So, you have connected the router to the computer and to the cable from the entrance. Next, open your browser and enter 192.168.1.1 in the address bar. You should be taken to the welcome page. Click on the button Continue.

3. The setup program prompts you to enter a username and password. Enter in the first field admin, and in the second admin. Click Continue.

4. Now you will be taken to the main menu Press the button Quick setup.

"Home Internet"- in this section, the connection to the Internet is set up, all the data that is necessary for connection is contained in the device's memory, you only need to enter your username and password from the contract in the appropriate columns.

"Wi-Fi network of the router"- in this section you have the opportunity to set up a wireless home Wi-Fi network. In field Network name you need to come up with and enter the name of your network, for example free_wifi, and enter the network key in the password column in order to protect your connection from unauthorized access. Please note that the network key must be at least 8 characters long, including numbers and letters of the Latin alphabet.

"Guest Wi-Fi Network"- it is possible to set up a guest Wi-Fi network.

"Beeline" TV- if you are also a TV subscriber, you need to select the port (LAN1, LAN2, LAN3, LAN4) to which you will connect the set-top box. In the event that you are viewing channels on a PC or using an Xbox 360, you do not need to configure port forwarding.

To save the settings, press the button Save.

6. It will take about 1 minute to save the settings and connect to the Internet router.

As soon as the connection is established, opposite the line Status a message will appear "Internet connected". Congratulations! Smart Box Router fully configured for networking Beeline.

Smart Box Firmware

First, download the firmware - smart_box_2.0.11.img

1. Having opened the browser, we go to the page 192.168.1.1? enter login admin, password admin and press the button Continue.

2. Click on the button Advanced settings

4. A page with advanced router settings will appear. In the menu on the left, click Software Update. Click on the button select a file and use browse to select the location of the downloaded file. Next, you can click the button Perform an update.

5. Wait for the device to update the firmware, it takes about 5 minutes, after that the router needs to be rebooted (pull out and insert the power cable of the router back). Your Smart Box is ready to go.

The main parameters of the Smart Box router:

Router address - 192.168.1.1
The latest firmware is 2.0.11
The username for accessing the device is admin
The password for accessing the device is admin
Network name (SSID) - Smart_box-XXXXXX (where X are characters unique for each device)
Wireless network key (Wi-Fi) by default - no key

Connecting a Smart Box Router

Connection setup

3. The setup program prompts you to enter a username and password. Enter in the first field admin, and in the second admin. Click Continue.

4. Now you will be taken to the main menu Press the button Quick setup.

"Wi-Fi network of the router"- in this section, you have the opportunity to set up a wireless home Wi-Fi network. In field Network name you need to come up with and enter the name of your network, for example free_wifi, and enter the network key in the password column in order to protect your connection from unauthorized access. Please note that the network key must be at least 8 characters long, including numbers and letters of the Latin alphabet.

"Guest Wi-Fi Network"- it is possible to set up a guest Wi-Fi network.

Beeline TV- if you are also a TV subscriber, you need to select the port (LAN1, LAN2, LAN3, LAN4) to which you will connect the set-top box. In the event that you are viewing channels on a PC or using an Xbox 360, you do not need to configure port forwarding.

To save the settings, press the button Save.

6. It will take about 1 minute to save the settings and connect to the Internet router.

As soon as the connection is established, opposite the line Status a message will appear "Internet connected". Congratulations! Smart Box Router fully configured for networking Beeline.

Smart Box Firmware

First, download the firmware - smart_box_2.0.11.img

1. Having opened the browser, we go to the page 192.168.1.1? enter login admin, password admin and press the button Continue.

2. Click on the button Advanced settings

Connecting a router

Setting up a router

Setting up a router for L2TP

Setting up a router for IPOE

Setting up a router for L2TP

4. "Home Internet"
"Wi-Fi network of the router"
"Guest Wi-Fi Network"

Setting up a router for IPOE

1. Open a browser and enter 192.168.1.1 in the address bar. You will be taken to the welcome page. Click the Continue button.

2. The router will prompt you to enter a username and password. Enter admin in the first field and admin in the second. Click the Continue button.

3. You will be taken to the main menu of the router. Select Quick Setup.

4. "Home Internet"
"Wi-Fi network of the router"- here you can configure the wireless network of your router. In the Network name field, enter the name of your network, for example my_wifi, and in the password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Guest Wi-Fi Network"- here you can configure the guest wireless network of your router.
Beeline TV - if you have activated the Beeline TV service, you need to select the port of the router to which you will connect the set-top box. If you are watching live channels on your computer or using the Xbox 360, then you do not need to configure anything.
To save your settings, click the Save button.

Fill the form:

Press the Login button.

Firmware update

Reset

Firmware update

2.0.38: (14.7 MB)