(Click on the image to enlarge)

1. Beeline TV set-top box TV remote control with decoding of buttons. It is useful for subscribers who are looking for information and want to set up Beeline TV. I'll make a reservation right away, this manual (manual) was written for those who first picked up the remote control from the Motorola console

2. To see which package is currently connected, change the package of Beeline channels or add additional channel packages, click the button Menu, then with the key To the right Down scroll to Channel packages and press the button OK.
You can see the available channel packages on the screen, navigating with the buttons Up down according to the menu, select the channel package you are interested in and press the button OK... Now you can view information about the package or connect the required channel package by selecting it and pressing the button OK.

3. Viewing the account status of Beeline TV. In order to see the status of your personal account, you need to press the button Menu, then with the key To the right follow to the position "", then with the key Down scroll to "Account balance"

Next, select with the keys Up down"Account balance" and click OK button. If you are connected + to, then the account status will be displayed as a single balance, for example, like mine. Here you can pay with a VISA card directly through the attachment or see the personal account number and pay in any convenient way.

4. Interactive services Beeline TV. This is not a simple cable TV, it is an interactive digital TV. It has Yandex weather, exchange rates, exact date and time; watching video from Rutube; social networks Facebook, Twitter, Vkontakte, Odnoklassniki; sea ​​battle game; sports news from Rambler.

All this can be used with the remote control directly on your TV screen. Push Menu and the key To the right to the position "Interactive". Select the service you need with the keys Up down and press OK.

5. Recording of TV programs. There are several ways to record programs. For example, simply by clicking the button Recording on the remote control while the program is broadcast. In this case, the program will be recorded from the very beginning, provided that you watch it first and did not switch the channel while watching, otherwise from the moment you press the key Recording... This was the first way.

You can also schedule a recording of a TV show, which will be tomorrow or in a week (up to two weeks in advance). You can also schedule a cycle of TV programs, suppose recording a series, each episode of which will be recorded automatically. For example, "Kvartirny Vopros" on NTV, will be recorded on the hard drive of the Beeline set-top box every Sunday at 12 noon, regardless of whether you are watching another channel or even your TV has been turned off.

6. Scheduling the recording. To schedule a recording, you need to enter the menu by pressing the button Menu, scroll with the key To the right to point Recording and scroll with the key Down to the item "Configure recording". Push OK and start planning the recording of the program you need using the navigation buttons (Up, Down, Right, Left)
Choose navigation buttons desired menu item and press OK
Using the same principle, select the desired gear and program the entry with the key OK. If you did everything correctly, the inscription "Recording is scheduled" will appear

7. Changing the recording parameters. To cancel the recording or edit the recording parameters, enter the "Scheduled" menu
Find a scheduled recording.

the entry you want to delete or edit with H aviation buttons and select it with the button OK
Now you can delete a scheduled recording, adjust the recording parameters, record everything (meaning all programs with this name that will be broadcast in the future, for example, either record one episode of a series or record all episodes)

8. Viewing recorded TV programs. Go to the menu, use the navigation keys to select "Watch recordings"
Select the desired entry and press OK

9. Channel settings. With Beeline TV, you can tune the channels you need in the desired sequence. Go to the menu and select "Settings"

Tune channels Mark the desired channels with Navigation keys and

click OK on the item "Save", now you can make sure that when scrolling through the channels are displayed in the order you need, for this select the item "Arrange"
Use the navigation keys to move through the channel list and

click OK on the arrow indicating the direction where you want to move this channel.

10. TV program is right in the menu of your TV, you don't need to buy it at the kiosk, you don't need to search the Internet. Go to the set-top box menu and select "TV program"
A description of the program can be viewed directly from the TV program.

(movie), set up recording. To do this, move through the menu Navigation keys, select the desired gear with the key OK
Here you can see

information about actors, description, customize recording.

11. Prefix settings. The settings menu allows you to customize the aspect ratio for your TV, customize the soundtrack for navigating through the menu, adjust the audio transmission format, select the style of the TV program, and much more. Those who have reached this point of the article will figure out the settings for a couple of times.

12. Parental lock. You can block access to children to view the channels you do not want by setting a password on the channel. How to do this is described in a separate article.

That's all, I tried to briefly and meaningfully tell you about the main opportunities in Saratov. There is a setup video here. Leave questions and comments in the comments. Connect friends and acquaintances at a discount and with your benefit.

Lesson 1.

Lesson 2.

That's all for today guys))

Remote controls are a practical, handy thing that allows you to conveniently use your TV. To control IPTV set-top boxes Beeline TV, TV, universal remote controls are used.

They are created by Motorola and are distinguished by ease of use and compactness. But often users have problems in practice, they may face a situation when the remote control is blocked.

In this case, the product simply will not work, will not be able to perform the necessary tasks. That is why you need to figure out in advance how to unlock the Beeline TV remote control, how to use cisco.

If you are faced with the task of setting up the remote control from the Beeline TV set-top box, then it is worth noting that the Motorola VIP 1216 model and others are popular. They are considered universal, so there should be no difficulty in setting them up.

There are two main ways to configure, as evidenced by the instructions. They are significantly different from each other, but both have the right to be. If the remote control refuses to work normally, then you should resort to one of them:

• In the first case, you will need to reprogram the product yourself in manual mode.
• It may seem simpler since you don't have to do reprogramming. You can manipulate the standard menu.

Various technical problems may occur, for example, it may happen that the consoles themselves do not listen. In such a situation, it will be quite difficult to control a set-top box or a remote control. There are also cases when the problem lies in the digital set-top box.

Do not forget that the TV has a television receiver, it can also cause problems - it can ignore the signals supplied by the remote control. In any case, you can cope with the problem, we have collected information about the settings instructions for you here:

Select your remote and download the official instructions.

Also, if you have an iPad, you can control your TV through the "My Beeline" application -

If you have already relied on interactive television, then you probably appreciated one of the main pleasant features of the control panel - the ability to replace the "lazy" from the TV. Now the warehouse of remotes on the couch or coffee table will give way to one single device that will gladly help you enjoy all the delights of the digital age. Programming the remote is no more difficult than counting the number of consonants in the word "programming" ...

1. Entering the programming mode

You need to enter this mode using the console from the console. To do this, press and hold the buttons for two seconds. OK and TV until the light on the button blinks TV... In order to program the remote control, you must enter a 4-character code, which is individual for each brand of TV. Below we provide this list. If the first code does not work, then try the next one on the list, and so on. Confirmation of the correct entered code will be blinking of the lamp on the TV button twice.

2. TV codes

1. Acer 1339 2190 1644

2. Aiwa 0701 1916 1908 1955 1505

3. Beko 0714 0486 0715 0037 0370 0556 0606 0808 1652 2200

4. BenQ 1562 1574 2390 2807 1523 2402 2214

5. Blaupunkt 0554 0195 0191 0535 0200 0327 0455 0170 0036

6. Elenberg 2274 1812 2268 2055

7. Fujitsu Siemens 1666 1298 1259 1248 1163 0808

8. Funai 1817 1394 1037 1666 1595 0668 0264 0412 1505 0714 1963

9. GoldStar 0037 0009 0370 0217 0247 0556 0163 0361 0109 0606 0714

10. Hitachi 1576 1772 0481 0578 0719 2207 0225 0349 0744 1585 0356
1037 1484 1481 2127 1687 1667 0634 1045 1854 0473 0343
2214 1163 0576 0499 1149 2005 2074 0797 0480 0443 0072
0037 0556 0109 0548 0178 1137 0105 0036 0163 0047 0361
0877 0217 2279

11. Horizont 1617 3024

12. JVC 0653 1818 0053 2118 0606 0371 0683 0036 0218 0418 0093
0650 1633 2801 2714 2578

13. LG 2182 1423 1840 1663 0178 0037 1305 1842 1768 0714 1637
0606 1319 1721 1265 0556 0715 1681 0001 0698 2057 2731
1859 1860 1232 2362 1149

14. NEC 0170 1270 0036 0455 0009 0374 0217 0037 0556 0011 2144
0245 1704 0499 0653 0053 0661 0882

15. Panasonic 0650 1636 1650 0226 0250 1310 0361 0853 0367 0037 0556
0163 0548 0001 1335 0108 1480 2264

16. Pionier 0370 0486

17. Samsung 2051 0812 0618 0587 1458 1619 0556 1249 1312 2103 2137
1630 0644 2094 1584 2097 1235 0009 0037 1678 0217 0370
0060 0766 0814 0072 0264 1037 0163 1243

18. Sanyo 0208 1208 0292 0036 0011 0370 0339 0072 0217 0045 0009

19. Siemens 0191 0535 0554 0200 0195 0327 0037 0556 0361

20. Sony 1505 1825 1651 2778 1751 1625 0010 0011 0834 1685 0036

21. Supra 0374 0009

22. Toshiba 1508 0508 0035 1567 1289 1656 1667 0714 1243 1935 0070
1582 1265 1704 0217 0109 0195 0191 0618 1916 1908 0009
0698 0037 0832 1556 0650 1156 1343 1037 2732 2598 1163

23. ViewSonic 1755 1542 1588 1511 2101 2111

The full list can be viewed

3. Automatic selection of the code

If you have no desire to enter the above codes, then you can use the automatic enumeration of the codes. This is done like this:

1. We repeat the entrance to the programming mode, which is described in paragraph 1.
2. Enter three digits from the remote control from the digital set-top box: 991
3. Now the button Ch + on the remote control is responsible for brute-force programming.

When I did this operation for the first time, I was quite surprised - on the screen, instead of my favorite car transmission, where they talked about a skoda car, the crankcase protection was recommended for installation immediately after purchase. It is made of steel and serves as a reliable engine protector from unwanted obstacles. It should be noted that the vehicle's ground clearance will decrease by about 0.1 m, but for movement around the city this change will remain unnoticed. In addition, the engine compartment will stay clean longer (especially when it comes to splashing from under the puddles).

After the TV turns off - don't forget to click OK to confirm the code (the light on the button TV already habitually blinks twice)

4. If the remote control from the set-top box controls both the set-top box and the TV ...

If such a situation arises, you need to change the control code of the set-top box itself. Yes, there is one, too, and you just have to choose the one you want, by brute force. To enter this code, which, by the way, also contains four digits, you must put the prefix into programming mode. Just three steps:

1. Hold the buttons POWER and OK within two seconds.
2. Enter one of the codes - 3220, 3221, 3222, 3223, 3224
3. Test the remote

5. Full reset

1. Again, hold down the buttons for a couple of seconds TV and OK... Button light TV immediately let us know that we are on the right track by blinking twice.
2. Enter a combination of numbers: 977
3. Light on the button POWER should blink 4 times.

The remote not only sits comfortably in the hand. but it also looks quite stylish - the best alternative for the overloaded and incomprehensible remotes of modern TVs, most of the functions of which you do not use every day (brightness / contrast is the most common example). If necessary, always keep a couple of batteries in reserve, so as not to suddenly return to the days of black-and-white programs, the control panel of which was the youngest in the family ...

Random anecdote:

Setting up the universal remote control Beeline

Detailed instructions for setting up universal Beeline remotes with the Setup button. See the simplified instructions on the main page

By default, Beeline universal remotes are configured for Motorola attachments. But there are many other models and it is not a fact that you will get the "Motorola". If you were brought another set-top box ("Kitty" (Cisco) for example), you must first bind it to the remote control, otherwise nothing will work. The valiant bee installer MUST set up the remote control, but, as practice shows, he often simply does not have enough time for this (don’t blame the poor guy, they are already driven like dogs), or you decided to do everything yourself. It is for such cases that this article was written.

× Attention 1!

Follow the instructions carefully. If you thought too long and did not enter the code for 4 or more seconds, the remote control goes into normal standby mode. If you suddenly did something wrong, do not worry, you just need to. This is at the end of the article.

× Attention 2!

This article fully applies to the new model Beeline universal remotes. It is easy to distinguish it by its appearance - the remote control is always black as in the above figures, the Beeline logo is applied at the bottom, the button " SETUP"located in the upper part of the remote control under the key" MENU".
In extremely rare cases, you may come across an outdated AT6400 remote control without a key. " SETUP", or MXv3 models with the" Learn" instead of " SETUP". The color of such a remote control can be either black or light. The binding of the remote control to the model is easy to determine - in the lower part of the remote control there is a logo." Beeline"the prefix logo will be located" Cisco"either" Motorola".
The remotes of this series are tied only to their own set-top box and will not control the other. (ie the remote control with the "Motorola" logo will not work with the "Kisko" prefix and vice versa)... But you can still set up such a remote to control the on / off and volume of your TV. A detailed article about such remotes can be found here:

× Supplement 2017

Since the new (2017) year, Beeline began to install new generation set-top boxes - Jupiter... From the advantages of this miracle - a huge terabyte screw, from the obvious disadvantages - the firmware for them is still damp. Very. Plus, only your own remote control is required for it, an ordinary universal one will not work. Below is the link for complete instructions for setting up these consoles:

Setting sequence:

Unlike its predecessors, the universal Beeline remotes of the new model (with the setup button) are extremely simple and reliable to set up. With strict adherence to the instructions, setting up and binding such remotes does not cause any difficulties. So let's get started:

Tie to pussy(Cisco):

1. Turn on the TV! ;)
2. Press and release the button STB.
3. Press the buttons AT THE SAME TIME SETUP and C, WAIT!
4. When the button STB SETUP and C.
5. We use :)

Tying to Motorola(Motorola):

1. Turn on the TV! ;)
2. Press and release the button STB.
3. Press the buttons AT THE SAME TIME SETUP and B, WAIT!
4. When the button STB blinks twice, release the buttons SETUP and B.
5. Press the volume button (optional, to check).
6. We use :)

Tying to Tatung(Tatung):

1. Turn on the TV! ;)
2. Press and release the button STB.
3. Press the buttons AT THE SAME TIME SETUP and A, WAIT!
4. When the button STB blinks twice, release the buttons SETUP and A.
5. Press the volume button (optional, to check).
6. We use :)

How to bind a volume control key to a TV:

1. Turn on the TV!
2. Point the remote control at the TV.
3. Press the button SETUP, WAIT.
4. When the button STB blinks twice, release SETUP.
5. Press and release the button TV.
6. Make sure the button TV blinked 2 times.
7. Enjoy.

× I will clarify in order to remove possible questions.
By default, the universal remote controls the STBOX volume (when the STB). The active key is very easy to identify, it flashes briefly when you press any button on the remote control. Now, after our gestures, the remote control can also control the TV. But for this to happen, you need to activate the mode TV by clicking on TV... After adjusting the volume and other parameters of the TV, you need to press again STB to return to the Beeline set-top box control mode.
It seems obvious, but very often people just forget to switch modes. TV / STB and are at a loss as to why the remote control does not work :).

How to bind the volume control key to the Beeline set-top box:

By default, the volume key on the universal remote is always tied to the set-top box, but just in case :-)

1. Press the button SETUP, WAIT.
2. When the button STB blinks twice, release SETUP.
3. Press the volume up button.
4. Press and release the button STB.
5. Make sure the button STB blinked 2 times.
6. Enjoy.

Automatic configuration of the remote control for full control of TV / DVD:

If you want not only to control the volume of your TV or DVD set-top box, but also to enter the native service menu using a universal remote control, they need to be "introduced", ie. "bind" the universal remote control to a TV or DVD. After this operation, the native TV remote control becomes, as a rule, not needed at all.

1. Turn on your TV or DVD!
2. Press and release the button TV for TV, DVD for DVD.
3. Point the remote control at the TV or DVD.
4. Press the button OK(in the center of the console), WAIT.
5. This will automatically search for the control codes for your device. During the whole process, keep the remote control in the field of visibility of the device! When the process ends, the device (TV or DVD) will turn off.
6. Release the button OK.
7. Enjoy.

Manual setting of the remote control for full control of TV / DVD:

There are two ways to bind the remote control - manual and automatic. I recommend using automatic - it's easier and more reliable. If the automatic search did not return any results (which happens very rarely), you can use the code table. Look for your device in the table and enter the code (4 digits)

1. Turn on your TV or other device - TV- TV set, DVD- DVD set-top box, AUX- amplifiers, video recorders, etc.
2. Point the remote control at the selected device.
3. Press the button SETUP, WAIT.
4. When the button of the selected device blinks twice, release SETUP.
5. Enter the device code from the code table.
We take the codes from the instructions from here:

6. If the code is successfully entered, the button of the device to be configured will flash twice.

If the code is not received within more than 4 seconds, the remote control will return to standby mode. In this case, we repeat the procedure from point 2.

7. Enjoy.

Factory reset:

If something went wrong, or you were "too smart" with the settings, you can always reset the remote to factory settings. But keep in mind that this will set the universal remote control to the Motorola prefix by default. If your set-top box is of a different model, you will need to reconfigure the remote control to it. So reset:

1. Press and release the button STB.
2. Press the button SETUP, WAIT until it blinks 2 times, release the button SETUP.
3. Press the buttons in turn 9, 7, 7 .
4. Button STB will blink four times, signaling that the remote has returned to its default settings.

(Hover over the image to enlarge)

Instructions for setting up a universal remote control in PDF from Beeline:

And finally, instructions for setting up a universal Beeline remote control in PDF from Beeline itself.