Instructions forBluetoothheadset

Charger:

The headset has a built-in lithium battery; charge the battery to a full charge before use.

2. Connect the charger to the headset through the charging port.

3. During the charging process, the LED indicator will work, after the battery is fully charged, the indicator will turn off.

Note:

1. A full charge takes about 90 to 120 minutes.

2. When charging for the first time, charge the device for at least 4 hours.

3. Carry out the first 3 charges only after fully discharging the headset until the headset is fully charged.

4. The device will charge at temperatures between -10 and +45 degrees Celsius.

On / Off:

1. Keep the "On" key pressed for about 3 seconds, until the indicator turns on, the device will be turned on.

2. To turn off the device, keep the "On" key pressed for about 3 seconds; after the indicator flashes 3 times, the device will be turned off.

Making a connection with a mobile phone:

1. Make sure the headset is turned off before starting the connection.

2. Turn on the Bluetooth function on your phone.

3. Keep the "On" key pressed for about 5 seconds; the indicator will flash red and blue alternately (for “Jabra” and “Motorola” headsets the indicator will be on continuously), which means that the device is in pairing mode.

3. Search for new Bluetooth devices on the phone.

4. In the window of the mobile phone device you will find the inscription "SANYO BL812", "Jabra" or "Motorola".

5. Select the line "SANYO BL812", "Jabra" or "Motorola" and create a connection.

6. Enter the pin code of the connection 1234 for "SANYO BL812 "or 0000 for "Jabra"And" Motorola ", press the "yes" button, the indicator will stop alternately blinking red and blue, and will start blinking blue (for "Jabra" and "Motorola" headsets - the indicator will stop permanently lit blue and will start blinking blue). This means that the connection was successful.

7. After connecting the headset to the phone, be sure to restart the headset (turn off and after 10 seconds turn on).

8. The headset will now be in standby mode, you can make and receive calls.

Note:

1. If the connection is not created within 90 seconds, the headset will automatically switch to standby mode. However, you cannot use the headset. Repeat steps 1-6 to create the connection.

2. When creating a connection; the recommended distance between the devices is less than 1 m. There should be no metal obstacles between the devices. This headset has a pin code "1234" or "0000". Different mobile phones have different ways settings, refer to the manual for your phone model for instructions.

3. If a connection is created, it will be saved even under the following circumstances:

1) the device will be disconnected

2) one of the devices stopped working

3) one of the devices will be rebooted

How to receive calls:

1. When you receive a call, press the "Talk" key after you hear the call.

How to end a conversation:

1. After ending the conversation, press the Talk key to end the conversation.

2. You can also wait until your interlocutor disconnects, then you disconnect automatically.

Redial the last call:

1. If your phone has the Last Call Redial function, you can use it with a headset.

2. The function is activated double tap Conversation keys.

Volume control:

1. Press the Volume + key to increase the volume.

2. Press the Volume- key to decrease the volume.

Microphone manufacturer NANO phones.

Representative of the NANO phones company in Nizhny Novgorod.

If your device cannot be configured to work with your headset in the standard way, contact Plantronics technical support.

Professional solutions for a modern contact center

At Plantronics, we understand that quality customer service is your top concern. Professional communications solutions can help transform customer service employees into true superheroes. Modern contact centers have gone from simple call centers to customer service centers, where relationships are built according to strict rules and the company's reputation is checked with every call.

Unified Communications - unified communications for modern business

The Unified Communications concept allows one-click communication. This makes voice and video calls much easier, so you only have to worry about what to say, not which device to use. Seamlessly interoperate with Plantronics' UC (Unified Communications) solutions for clear speech, noise-free conversations and connectivity to any device.

Sound masking systems for an efficient work environment

Sound masking systems are a new step towards creating an efficient and comfortable working environment. Today the most common type of office is "Open-office", when there are no partitions in the office, and employees can freely move and communicate with each other. This has a positive effect on the environment in the team and the exchange of information, and at the same time creates additional distractions, the main of which is the speech of colleagues. It is very difficult to concentrate on work when you are surrounded by all sorts of conversations, and you have to be distracted without wanting to. The solution to this problem is the use of sound masking systems from Cambridge Sound Management.

Fragment of instructions

The headset supports the function simple connection which allows you to connect devices without entering a PIN. This function is only available if the devices support Bluetooth version 2.1 or higher. You can also use the Active Connect feature to connect devices (see page 14). Pairing a headset with two phones Using the Multipoint function, a headset can be paired with two Bluetooth phones at the same time. 1 Establish a connection with the first Bluetooth phone. 2 Press and hold the answer button for 3 seconds to enter pairing mode. 3 Activate the Multipoint function by pressing and holding the volume up button. 4 Turn on Bluetooth on the second phone and search for a headset (see your phone's user manual for how to do this). 5 From the list of devices found by the second phone, select the headset (HM1200). 6 When prompted, enter the Bluetooth PIN (0000, four zeros) to establish a connection between the headset and your phone. 7 Re-establish the connection between the first phone and the headset. Some phone models do not support connecting to a headset as a second device. Turn on the multipoint function In the connected mode, press and hold the volume up button. The indicator light will flash blue twice and beep. sound signal... To turn off the Multipoint function In the connected mode, press and hold the volume down button. The indicator light will flash red twice and a beep will sound. Disconnecting the headset from the device Turn off the headset, or use the Bluetooth menu on your phone to remove the device from the list of connected devices. English 13 Reconnect the headset to a device If the connection between the headset and the phone to which it is connected is disconnected, follow these steps. Press the answer button on the headset or use the Bluetooth menu on your phone. Each time you turn on the headset, it will automatically try to reconnect to the device. This function may not be supported by some phones. If Multipoint is enabled, the headset will try to connect to the last two devices. Using the active connection function When the active connection function is turned on, the headset automatically searches for a Bluetooth device and tries to connect to it. This feature only works with mobile phones, and the phone visibility feature must be enabled. 1 In connected mode, press and hold the answer button to switch to active connected mode. For information on how to enter pairing mode, see page 11. 14 The purple indicator turns on and the headset searches for a Bluetooth-enabled phone within range and attempts to connect to it. Make sure the phone you want to connect to is near the headset. Place the headset and phone side by side to avoid accidental connection to other devices. Active connection attempts will be made for 20 seconds. The Bluetooth phone you want to connect to must not be connected to other devices. If your phone is already connected to another device, end the connection and restart the active connection function. Some devices do not support this feature. Call functions The availability of a particular call function depends on your phone model. English 15 Make a call Redial last issue To dial the last call from your primary phone, follow these steps. Press the answer button. To dial the last call from a second phone, do the following. Press the answer button twice. On some phone models, pressing this button opens the call log. Press the answer button again to dial the selected number. Voice dialing numbers Press and hold the answer button, and then say the person's name. This feature is only available on the primary phone when using the profile speakerphone... Some devices do not support this feature. Answering a call When a call comes in, press the answer button. When a call is received on both phones that are connected, you can only answer the call that is ringing on the main phone. Ending a Call To end a call, press the answer button. Rejecting a call To reject incoming call, press and hold the answer button. When a call is received on both phones that are connected, you can only reject the call that is on the main phone. This feature is only available when using the hands-free profile. Opportunities available ...

Contents of delivery:

• Headset
• Charger
• Charging case
• User manual
• Additional ear caps (included in some countries)

The Samsung WEP 200 Bluetooth headset is a fashion product, its main difference from competitors, which immediately catches the eye, is its miniature size. In general, this is not the first small headset, just remember similar devices from Bluespoon, however, it has a number of features concerning not only itself, but also the delivery set.

Design and construction

The design of the headset is certainly curious. At least the fact that such small headsets are still a novelty on the market, now they are fashionable, rather expensive solutions, but soon, perhaps, such a size for a Bluetooth headset will become, if not a standard, then a common thing. The rest of the design of the device can be characterized by the phrase "nothing to catch on". The body has the shape of a slightly "plump" bar, contacts are visible on the back side, by the way, if you wear them frequently, you may need to clean them. The black color is certainly advantageous, especially in our market, the coating is varnished, reliable, the paint is unlikely to peel off during operation. It was not chosen by chance; upon closer examination, associations with many Samsung phones, although, in principle, the design of the headset goes well with any black phone (take at least the same Sony ericsson W900, Nokia N80).

Both men and women liked the design of the headset, the focus group was small - four men and three women. Everyone noted the miniature size, the good color (except for one girl who did not like the color), they commented positively about the transport case (about it it comes below). And, surprisingly, after an external examination, everyone had a question about wearing comfort and sound quality. Before we talk about this in more detail, I will express a question posed by a girl who did not like the color: "Will the WEP200 be produced in white?" Therefore, this device is perfect for both sexes, but a second, less brutal, color is necessary to attract the attention of women. For example, it might be white. Well, and one more detail noticed, while one of the girls was trying on the headset - WEP200 becomes completely invisible under long hair. How this affects the quality of speech transmission remains unclear, it is quite possible that in no way.

In terms of wearing comfort, be sure to try this headset on before purchasing. As you can see in the photographs, the mount is implemented in a rather unusual way - there is no ear hook, the earpiece is simply inserted into the ear canal, and the fixation is done using a small rubber seal. Alas, the headset just didn't fit me - just tilt my head to the right or left, shake it a little, and the device is on the floor. I was not the only one who measured the headset, other people (I really want to call them experimental), there were no particular problems, but it was not completely clear whether the "wearability" they talked about was thought out because of the attractive design ( the things you like have no flaws, right?) or is it really easy to wear the WEP200 and does not cause discomfort?

The headset is very light, you feel it on your ear only because you know about it (well, and, of course, you also feel the seal in the ear canal).

The delivery set for some countries includes additional eartips, alas, they were not included with the test sample, perhaps the result would be radically different when used with a different earpiece (at least for me). It will be interesting to try to wear the Sony Ericsson HBH IV 835 headset, the earpiece familiar from the HPM-70 wired headset is used there, in theory, it should be more convenient than the WEP200 solution.

The assembly of the device is good, there are no gaps, backlash, no squeaks when pressed.

Control

The device control is quite standard - on the front panel there is a multifunctional button (hang up / receive a call, enter pairing mode, dial the last dialed number, etc.), on one of the ends of the headset (it's just hard to say whether it is top or bottom, right or left) - volume rocker key. In general, the keys are pressed quite easily, clearly, but the owners of large hands will have to adjust for some time - miniaturization has a downside. I would not call my fingers that big, however, I also had to get used to controlling the call volume for some time. This fact cannot be called a problem, rather, it must be taken into account when buying. One more thing: at first, it is not always possible to correctly calculate the force of pressing the multifunction button when answering an incoming call - the headset is pressed into the ear, painful sensations may occur (although, of course, this greatly depends on the size of the auditory canal).

And the last thing about the controls - in order to enter the device into pairing mode, it will take quite a long time to press the multifunction key, so do not be surprised. Be sure to ask the seller to demonstrate this trick.

Nutrition

In theory, it would be necessary to start with the type and capacity of the battery used, but the beginning of this chapter will be different. The point is that in Samsung kit Includes a small case that vaguely resembles a toy chest (there are no fairy tales inside). In order to charge the device, you need to put the headset on the contacts in this case, close the lid, and then connect the charger to it. By the way, it has its own format, it is not a "hackneyed" miniUSB. When the headset is charging, the inside of the case is highlighted in red. As you can imagine, you cannot use the headset while charging.

What can I say here? On the one hand, one can see the manufacturer's attempt to be original - the Nokia BH300 (the dimensions are practically the same) "on the body" has a connector for charger, new "thin" memory is used. Samsung engineers decided to go their own way. Purely subjectively, the decision is curious, it is impossible to assess it adequately until you turn on logical thinking. Well, logic dictates that the same BH300, while it is being charged, can not be disconnected from the phone - when a call comes in, it is enough to disconnect the charger, hang the headset over your ear and start a conversation. In principle, the same can be done with the WEP200, but the process of removing it from the box will take an order of magnitude longer, and purely psychologically, I don’t want to touch the headset while it is in the case. On the other hand, the time to fully charge the headset is not that long, if you put it on charge in the evening, you will not experience any problems with the case. In addition, the additional functionality of the magic box - use as a transport case - makes it even more attractive. And yet, guess who will particularly like this thing (meaning gender)? Who will simply be thrilled by the very process of opening and closing the case, demonstrating it to others?

The headset uses a 70 mAh Li Ion-Pol battery, WEP200 talk time can work 4 hours, standby time - 100 hours, charging time - about two hours.

Here, probably, it is necessary to say and this is what. The headset is one of the few that uses the Bluetooth 2.0 profile. This is great, the seller can tell you about it, but what does it give? Apparently, the main result of using this profile is reduced power consumption, we will talk about this in more detail in another article.

Communication with the phone, sound quality

The headset was tested with two phones: Nokia N80, Sony Ericsson W900. As mentioned above, to enter the device into pairing mode, you need to hold down the multifunction key for a rather long time, this is not very convenient. Otherwise, there were no problems with pairing, however, not only with pairing, but with operation in general - voice dialing works adequately, as well as switching between lines, receiving and rejecting a call.

The sound quality can be described as average, moving away from the phone by more than three to four meters, you hear noises, crackling, in normal mode (one meter or less) they are absent, however, the interlocutors complained that the voice was heard as if from a barrel, asked to repeat spoken louder. You can hear the interlocutor well, there are no problems with that, the volume level is sufficient.

The headset is not equipped with a DSP processor, which will mean this fact for the user - there is no need to explain: it is best to talk in a quiet room, otherwise, if you are, for example, in a supermarket, your interlocutor will enjoy a wonderful addition to your conversation - the voices of people around , speakerphone announcements, etc.

conclusions

Samsung WEP200 is a fashion headset with many "buts". Beautiful, but the quality of speech transmission is noticeably lame. The headset comes with a nice case, but isn't it easier to charge the headset in the usual way? The mounting method is unusual, but is it convenient? The headset has small size and weight, but does it add convenience?

As for the competitors. The average retail price of WEP200 is about $ 100, at first it seems that it can and should be compared with other miniature "luxury" headsets - Jabra JX-10, Nokia BH-800. But this is not so, for understanding it is enough to look at the Nokia BH-300 ( average price- about $ 65) - almost WEP200 and BH-300 are similar, like a brother and sister (in that order). The main differences of the 300th model - you can change the bezels, several pieces of different colors are included in the kit, charging is carried out in the usual way, the design of the device is more "feminine". Most of the characteristics of these devices are the same. Apparently, both the WEP200 and the BH 300 are made on the basis of one “progenitor” headset (most likely from Jabra), we have yet to return to it in the reviews of some devices.

Proceeding from this, an additional 35 dollars when buying a WEP200 (let's take the BH-300 for the “base” price, which is rather big, I must say), the consumer will pay for the case and the black color “included”. The language does not dare to call it a good buy - for $ 100 you can buy a more functional and even more fashionable product (for example, Jabra JX-10). And, nevertheless, the WEP200 will find its buyer, it is quite possible that the majority will be women - sellers can be recommended to immediately demonstrate the charging case, talk about the lightness and invisibility of the device (at this time, the case can be opened and closed, hidden and removed from headset).

Specifications:

• Bluetooth profile: 2.0
• Standby time: 100 hours
• Talk time: 4 hours
• Weight: 9 grams