Surely all experienced users working on the Windows operating system know that for troubleshooting and solving some problems safe mode OS work. But not everyone is aware that mobile gadgets can also be loaded in a similar design shell.

Let's try to figure out how to turn on the phone in safe mode ("Android"), and what steps must be taken for this. We will consider ordinary devices - tablets and smartphones running on the official (stock) firmware. If you have upgraded the gadget with an amateur (custom) firmware, then the actions described below may respond incorrectly, or not work at all.

Why is this mode needed?

Before enabling safe mode on Android, let's decide why it might be needed at all on this platform. As you know, the operating system "Android" is distinguished by its, so to speak, democratic character, while other shells try to secure their "inner world" as much as possible from possible mistakes newbie operator. That is, the user has access to almost all software corners of the gadget. With the help of third-party software, you can easily change not only appearance operating system, but also her behavior, and beyond recognition. And as is often the case, you have to pay for such beauty.

If, after all your interventions, the platform began to slow down, freeze, and generally ceased to function normally, then you begin to ask the question: "How to enable safe mode on Android to eliminate these lags?"

The fact is that this mode can be called "clean", that is, when it starts, only the main system services are connected, where you can trace the history installed applications and make some corrections, then reboot into normal working state.

So how do you enable Safe Mode on Android? In total, you can count two main ways that will allow you to enter a "clean" system.

The first way

You need to press and hold the power button of the gadget until the reboot pop-up menu appears. Then you need to press and hold your finger on the item "Disconnect the device". After 5-10 seconds, a dialog box should be displayed, which will warn you about the transition to the safe mode of operation after clicking on the "OK" button. Some versions of Android (usually on tablets and phablets) can immediately reboot without any additional windows. Keep this in mind before enabling Safe Mode on your Android tablet.

After clicking on the "OK" button, your gadget should restart and start only on the basic system services. Moreover, the process may take some time, a little more than with a normal download.

Second way

Turn off your mobile gadget completely, as you usually do. Wait a few seconds and then press and hold the power button. After your phone brand or brand appears on the screen, hold down the volume rocker in the "+" (increase) position.

After that, the Safe Mode icon will appear on the display, and the device will start loading the platform on the main system files... In some versions of the OS, it is not necessary to hold the power button, it is enough to wait for the logo to appear on the screen and hold the volume rocker. Also, keep this point in mind before enabling safe mode on Android.

How do I disable Safe mode?

As a rule, this mode turns off after restarting the gadget, and there is no need to perform any additional steps. If the phone continues to start in safe mode, then the platform does not want to work correctly with the installed third party applications or the system is completely damaged.

The only way out in this case is to reset all settings to factory settings ("Settings" -> "Reset system"). Separately, it should be noted that all information will be deleted in this case, so worry about the transfer in advance phone book and other important data.

Any advanced user of the Windows operating system knows about the existence and purpose of Safe Mode. However, few people realize that there is such a mode in the Android mobile operating system.

Safe mode for Android is a special mode in which you can boot your phone. When you boot your Android device in safe mode, only system applications will start. Thus, you can easily boot a device that freezes or slows down a lot from installed applications.

After loading in safe mode, you can remove everything that interferes with the operation of the Android device and return to normal operation. But, in some such cases, users have difficulty returning to normal operation of the device. In this article, we will tell you how to enable and disable Safe Mode on Android.

How to remove or disable Safe Mode on Android

Let's start with how to disable Safe Mode on Android, since this is what causes the most difficulties. There are several ways to remove Safe Mode on Android.

• Method number 1. Disconnect the battery for 30 seconds, then put it back and try to load Android device in normal mode.
• Method number 2. Restart the device and hold down the "Home" button while turning it on until the device is fully loaded.
• Method number 3. Restart the device and while turning on, hold down the volume down button and hold it until the device is fully loaded.
• Method number 4. Restart the device and while turning on, hold down the volume up button and hold it until the device is fully loaded.

How to enable Safe Mode on Android

If you have Android 4.1 or more a new version, then in order for Android you need to click on the power button of the device. After that, a window will appear in front of you, in which you can turn off the power to the device, or turn off the sound. Here you need to click on the "Turn off the power" item and hold your finger until a message appears prompting you to switch to safe mode.

After prompting to switch to safe mode, click on the "OK" button.

After that, the Android device will restart in safe mode. After loading, an inscription will appear at the bottom of the screen informing that the device is working in safe mode.

This is done in such a simple way, but you already know how to turn off safe mode on Android.

If you are using Android 4.0 or more old version of this operating system, in order to enable safe mode, you just need to turn off the device, and when you turn it on, wait for the manufacturer's logo to appear and hold down the volume up and down buttons. These buttons must be pressed at the same time and held until the Android device is loaded.

Would you like to add something to the article? Share in the comments.

Has your device stopped working normally? Safe Mode will help you fix this.

Navigation

Every more or less experienced computer user is aware that there is a special safe mode in the system, designed for troubleshooting. Android is no exception, but not everyone knows about its safe mode

Why is Safe Mode needed?

• For starters, it's worth saying why Android Safe Mode can come in handy at all. Everyone knows that Android is a democratic system in which you can do what others cannot.
• With the help of downloaded programs or manually, you can change the appearance and operation of the system as you need it. But also because of this, the operation of the device is sometimes disrupted, and this can be fixed using the safe mode
• When you start it, only system applications will work for you, and you can get rid of unnecessary programs, and then go into normal mode

How do I enter Safe Mode?

• To enter, you need to: Press and hold the power button until the shutdown menu appears
  Select power off and hold your finger on it until the following menu appears:

• After the desktop appears in the bottom corner, an inscription will appear that the phone or tablet is running in safe mode. Now you can do all the necessary actions or uninstall unnecessary applications. In addition, you will get the opportunity to see how Android will work without being burdened with unnecessary programs.

• To return everything to its place, restart the device again. In some situations, difficulties arise, and the gadget turns on again in safe mode. To fix this, take out the battery for a while and put it back in.

How do I disable Safe Mode?

There are several ways to do this:

• To deactivate, briefly turn off your device and remove the battery from it. After that, wait 30 seconds and put it in place. After that, the device should boot in normal mode with the work of all programs and the system itself
• This method is not universal, because today not every smartphone or tablet has a removable battery. This is especially true for many Chinese models. Therefore, this circumstance does not allow it to be applied to absolutely all devices.
• devices. As soon as it starts loading, press the "Home" button and do not release it until the gadget has turned on completely
• In some cases, the device simply does not have a reboot function. In this case, you just need to turn off the gadget and turn it on in the same way.
• For the third method, you need to turn off or restart the device. At startup, you need to press and hold the volume down button until the phone is fully loaded
• At the end of these actions, you will be taken to the system part of the device, where you need to click "Wipe data / Factory Reset"
  You need to select with the shutdown button. Next, you will see a screen to confirm the deletion of all data from the smartphone, to which you should answer positively
• After that, wait until all information is removed from the gadget and restart it in normal mode
• For some models, instead of decreasing, you need to hold the volume up. It all depends on the device and the operating version.
• In any case, at least one of the above methods will help you deal with disabling safe mode on the device and then it will work fine again

Video: How to remove safe mode on Android OS?

If your Android phone or tablet has switched to safe mode on its own, and the translucent notification on the screen does not disappear, it is worth using a few steps to fix the problem below.

How to disable safe mode on Android - restarting the device

The simplest and most efficient way- just turn your phone off and on. If a slight failure occurred in the system, but it did not cause significant damage, then the device is more likely to work normally after restarting.

How to disable safe mode on Android - remove all downloaded applications

Most common reason lies in system error one of your apps. If your device has paid widgets and applications, do not worry, because your Google account stores information about all downloaded programs and their payment.

• go to the settings of your smartphone,
• find the “Applications” tab,
• then click the left tab called "Downloaded",
• uninstall the application,
• repeat with all downloaded widgets and programs.

If, after completing all the steps and rebooting, the safe mode still remains, do not despair and go to the next option.

How to disable safe mode on Android - reset device settings to factory settings

Depending on the degree of damage to the data on the smartphone, the reset can go quickly through the device menu, but it may also be such that you need to perform it through the boot menu. We will analyze both cases in detail, but first, make a backup to save all valuable files from the phone. For this:

• go to settings and find the tab “ Backup and reset ”,
• select the field “Reserved Account”And enter your Google account details,
• turn on device sync and check the box next to the word “AutoRecover”.

Now your files are backed up to the cloud and will be restored after deletion. You can start resetting your data:

• in the same tab “Backup and reset” click on the field “Reset to factory settings”,
• confirm the reset and wait for the smartphone to perform all the necessary actions.

After that, all programs and files will be deleted from the phone, and it will stop loading in safe mode. If, for some reason, the reset failed, you will have to do it manually.

• turn off the device,
• hold down the key combination to enter the recovery menu. Most often, this is the simultaneous holding down of the power key and the volume down key, or the power and volume up keys. If these options do not fit your device, you should find your way on the Internet,
• in the menu that appears, select the line “ wipe cache partition ”,
• wait for the device to reboot.

After completing all the steps, your device will boot in normal mode and restore backup... If none of the tips proved to be effective, then the smartphone should be taken to service center in the reliable hands of a specialist. Remember, disassembling the parts of the phone and changing the firmware yourself may be fraught with the termination of warranty service. Take care of your device and do not forget about the timely solution of problems associated with it.

Experienced operating theater users Windows systems know about the existence of safe mode on their PC, but few people even guess that it is in the Android mobile OS. Therefore, for some users, the transition to normal mode becomes difficult. For more details on why you need Safe Mode on Android and how to turn it off, read our article.

What is Safe Mode in the Android mobile operating system?

Safe Mode in Android is a special boot mode that allows you to start the system with only system applications. Thus, you can restore a phone that freezes or slows down from an overabundance of applications, and delete unnecessary ones. However, after the operations done, not everyone is able to return to normal mode.

How to disable Safe Mode on Android?

Removing the battery

To remove safe mode, you need to turn off the device and remove the battery for at least 30 seconds. Then insert the battery into place and turn on the gadget. Android should start working normally, all applications and data will be saved.

The only drawback of this solution is that not all devices allow you to remove the battery. Therefore, this method is not applicable to all Androids; for such cases, there are several more methods for exiting safe mode.

Using the Home button

This method is as simple as the previous one. All you need to do is:

Some devices may not have the reboot function, in such cases, you just need to turn off and on the gadget.

Pressing the volume up / down button

Attention! This method resets the device to factory settings, all saved data will be lost.

• Files can be copied to a computer by connecting a device to it. Or put everything you need in cloud storage... For example, Google Drive.
• All applications can then be re-downloaded. If they were purchased by you, then the payment will be saved, and you will not have to spend the money a second time.
• Your contacts will not be harmed, but for greater confidence, you can export them to a file and save them to your computer.

What you need to do to reset your phone:

1. Turn off the device while holding the power button.
2. At boot, press the keyboard shortcut to enter recovery mode. The combination of buttons depends on the device model. The most common combinations are: power button + volume down button (LG, HTC, Motorola); power button + volume up button + Home button(Samsung).
3. After the recovery menu appears, use the volume keys to select "Wipe data / factory reset" and activate it with the power button.
4. In the next step, confirm your decision by clicking "Yes".
5. Wait for the restoration to complete. The process may take several minutes.

Video: How to turn off Safe Mode on an Android tablet / phone?

Safe Mode is an integral part of the operating room. Android systems which helps in case of system overload. There are several ways to get out of it. If you follow the instructions and step by step follow all the suggested actions, then there will be no problems with data loss or system crashes.