Undoubtedly Photoshop program is a great helper for many users. It's not very easy to use, but that's the beauty of it this application. No matter how high your level of Photoshop proficiency is, you can work in it in any situation. Of course, an inexperienced user will not be able to perform, say, at the level of a professional photographer, but performing basic actions with pictures is always welcome.

This educational program is not intended to teach you the intricacies of working in Photoshop. On the contrary, I want to talk about simple actions, which, however, sometimes raise questions even among avid users. For example, not everyone knows how to undo an action in Photoshop cs6, but this is an incredibly useful skill! So, if you are also wondering how to answer this question, join us!

Using a keyboard shortcut

I think I won’t be discovering America if I tell you that a lot of things in Photoshop are “tied up” to certain key combinations. Canceling an action is no exception. IN this issue The main thing is to remember the necessary combinations in order to use them at the right moment, without resorting to hints. Below I will give three options for the development of events, which I am sure will be useful to you.

1. The keyboard shortcut Ctrl+Z will allow you to go back one step.
2. If you add a third one – Alt – to the above combination, you can go back several steps, in particular, up to 20.
3. Using the Shift+Ctrl+Z buttons on the keyboard simultaneously, you can go back several steps forward, but remember that this action is limited to 20 steps.

So, by remembering one basic combination and adding this or that key to it, you can cancel your actions in Photoshop.

Use settings

I want to tell you about one more technique, which, unfortunately, many do not take into account. 20 actions that can be canceled is a conditional figure set by default. If necessary, you can increase it, say, to 100, and then you certainly won’t be afraid that you won’t be able to return to a certain stage of your work.

So, here's what you need to do: open the program menu, then go to the editing section. There, open the subsection “Settings” - “Performance” - “Action History”.

And here, set any parameter, for example, 100 actions. I would like to draw your attention to the fact that if the performance of your computer leaves much to be desired, and it can barely handle such a capacious program, then such a change in settings will most likely slow down the work of Photoshop. It's also worth

Good day, dear friends. Imagine that you were concentrating on some project in Photoshop. And then you’re done, you’ve completed all the effects, you’ve drawn and processed everything, and even . And then you notice that the final image shows a serious flaw that suddenly caught your eye. Panic, layers merged. What to do? How to retouch? A few hours of work!

In fact, I hasten to reassure you. There's nothing wrong with that. You can go back one or several actions, up to a certain point. And today I would like to tell you how to cancel last action in Photoshop and don't worry if you mess up.

So, let's go!

Cancel using hotkeys

The easiest way to go back a certain number of steps is to use keyboard shortcuts.

To undo the last action, press the key combination "CTRL+Z". But this link only works with one last action, i.e. you can go back just one step back. And if you press these keys again, you will return to where you started.

To undo several steps, you need to press the combination "ALT+CTRL+Z". Then each press of this combination will cancel the previous action until you return to the desired step, when everything was fine. Very fast and convenient.

Return using the History panel

Let's consider another way to cancel actions, namely the History window. Why it’s convenient this method? The fact that you see what actions you performed when. This way you can immediately choose which step to return to. Well, in general, let's look at it in practice.

This is how you can easily and conveniently return to some previous state of work. In addition, “History” allows you to see how much the image has changed compared to the original after editing. To do this, simply return to the very top step. Have you looked? Now go back to the last step again.

Well, how do you like the return? Useful thing? Still would. You definitely need to know this. And by the way, if you really want to know Photoshop well, then be sure to watch video course on working with him. The lessons are simply amazing, no fluff and everything is told in human language. Highly recommend.

Well, I’m finishing my lesson for today and I hope you liked it. And you, in turn, don’t forget to subscribe to my blog updates and tell your friends, then everything will be cool. Well, we'll see you in other articles. Bye bye!

Best regards, Dmitry Kostin.

– popular graphics editor, providing users with endless possibilities for creating and editing images. Each user of this program may encounter erroneous actions during operation that need to be undone. To learn how to undo a completed action in Photoshop, read the article.

Method 1: Undo last action

The most popular, which is used in almost any program with an editing function. Certainly, we're talking about O Ctrl+Z .

But there is one caveat - this combination only applies to the last action that needs to be undone. If the combination is pressed again, the action will return to its place.

Method 2: Undo a series of actions using a keyboard shortcut

If you need to remove two or more recent actions performed in Photoshop, then a keyboard shortcut will help you Ctrl+Alt+Z .

With its help, you can undo up to 20 last actions, returning to that stage of working with graphics when no mistakes were made yet.

Please note that the parameter of 20 actions is set in the editor by default, but, if necessary, you can increase this number to be able to cancel large quantity actions at a time.

To do this, at the top of the editor, click on the button "Editing" and in the menu that appears, go to the item “Settings” – “Performance” .

IN right area the window that opens will contain a block "History and cache" , in which you will find the parameter "Action Story" . Enter the desired number at your discretion (within 1000) and save the changes.

Method 3: Editing History

After completing an n-number of actions, you can delete selected actions by accessing the toolbar in the right area of ​​the window, where the item is located "Story" .

Just click on the desired action from the list right click mouse and select "Delete" .

As in the second method, 20 completed actions are displayed here by default. You can increase the number of canceled actions through the same menu “Editing” – “Settings” – “Performance” .

Knowing about the methods of canceling actions given in the article, working with it will become much more convenient and productive.

Adobe's graphics editor, Photoshop, has been a favorite among photographers and graphic designers for almost a decade. Here, in the electronic environment, you can correct any of your mistakes and go back several steps, which is difficult to implement on paper. In this article you will learn all the nuances of undoing actions in Photoshop.

How to quickly undo an action in Photoshop

If you need to undo one or three actions, you can do this using Photoshop hotkeys. These are special combinations of buttons that you need to remember, as they significantly reduce the time you spend working with the program and can significantly simplify it.

Completely undo the last action: CTRL + ALT + Z. This will take you one step back in your editing.

Another method: CTRL + Z. It works completely differently. You roll back the action, but if you press this key combination again, the last step will take effect again. This is very convenient when you are not sure whether you want to undo the last action. By pressing CTRL and Z several times you can see both options and choose the best one.

If you roll back changes in this way and do not return them by clicking on the combination again, then the rollback will remain in effect.

How to undo an action in Photoshop through the “History” tab

If you have to roll back your editing changes many steps back, it is better to immediately go to the “History” tab. Setting up its display is quite simple.

Go to the “Window” or “Window” section. Select “History” or “History”.

A small window with the same name will immediately appear on the screen.

As soon as you start editing photos, new lines with the names of the tools will begin to appear in “History”. For example, if you took a brush and painted some area, the “Brush” item will appear in the history.

To undo several actions at once, simply click on the editing period to which you want to roll back the changes. This way you can navigate through history and select any point.

There is also a settings tab available in the history, where you can slightly change the appearance of this window. Click on the three stripes in the upper right corner. Then select the “History Options” section.

How to increase the size of a story in Photoshop

It often happens that a story suddenly ends at the right place. You need to undo the changes, but these lines are no longer there. To do this, you need to increase the memory cache for consumption by history.

Open the “Edit” or “Editing” tab, then go to “Preferences”. Another window pops up in which you need to click on “General” or “General”. It all depends on the language of your program.

In the window that appears, go to the “Perfomance” tab, in which you will find the section labeled “History States”. By default, it is set to “50”; change it to the maximum available “1000” by simply pulling the slider to the right.

Now your history is difficult to fill: it will store your every action, and you can undo any step.

Try to remember the hotkeys and this method to make it easier to navigate the editor.

When working in Photoshop, you often need to take a step back. And often not alone. But ? Is it possible to undo actions only for part of the image? It turns out that it is possible! Let's figure it out.

Key combination

As in any text editor, V Adobe Photoshop The standard key combination Ctrl+Z works, which cancels the last action. (Analog: Main menu → Edit → Undo). But the problem is that this combination only cancels one action. When you press it again, the cancellation is canceled, i.e. everything returns as it was. If you need to undo several actions, you should use Ctrl+Alt+Z (Analog: Main menu → Edit → Step Backward). You can cancel the cancellation, i.e. step forward: Ctrl+Shift+Z (Analog: Main menu → Edit → Step Forward).

By default, you can only undo the last 20 actions. If necessary, this number can be increased to 1000. You just need to understand that if you do not have the most powerful computer, and it somehow copes with Photoshop, then such an action will lead to slowdown. It is necessary to find a balance in which a sufficient number of steps would be maintained, and the program would not hang! To change this number, follow the path: Main menu → Edit → Preferences → Performance. In the “History States” line, enter the required number. Ok.

Palette History

You can more clearly undo an action in the History palette. By default, palettes are on the right.

If you don’t have the “History” palette, then go to: Main menu → Window and put a “bird” in the “History” line.

Palettes can also be rolled up.

In this case, we find the icon of the “History” palette (arrow 1) (If you hover the cursor over the icon and wait a while, the name of the palettes will pop up). Clicking on it will open a smaller version of the palette. Or you can expand all the palettes by clicking on the double arrows in the corner (arrow 2). The History palette can be anywhere in the palettes area. You can move it wherever it is convenient for you. Or even unhook it from the rest of the palettes and move it to a place convenient for you. I will tell you more about working with palettes in the next lesson.

The “History” palette sequentially records all the actions that you performed after opening the document. The number of actions remembered is the same as when canceling using a key combination. If you specified 50 in the settings, then there will also be 50 of them in the palette (How to change the number of memorized actions is written above). Moving up the line, you cancel one action at a time.

Each line contains the name of the instrument and its icon. To the left of the icon there is an empty window, which we will talk about a little later, in next method cancel the action. As you move up the list, the bottom lines turn gray. This means that they were canceled, but remained in memory. You can return to them again. But if, after undoing several actions, you use some tool or perform some other action, then these steps (gray lines) will be lost. You can take pictures on the palette good options. The image of the camera is at the bottom of the palette (arrow 1). With further changes, the image will remain at the very top of the palette list (arrow 2).

Archive brush

In this method we will look at how to get part of an image back. The “History Brush” tool, which is located on the toolbar, or the Y key (Shift + Y) will help us with this.

Next to the name of the tool, if you noticed, there is a letter Y. This means that by pressing Y, we go to the cell we need. And the keyboard shortcut Shift+Y cycles through all the tools marked Y. Using hotkeys greatly improves productivity!

Let's say, for example, I send a cloud of leaves along the arrow.

Moreover, first I will draw yellow and green leaves, and the next step will add red ones. In this case, in the “History” palette I will have two lines with the “Brush” tool.

Now I want to remove the red leaves that were drawn second. But we will not remove them everywhere, but only along the arrow. To do this, on the “History” palette to the left of the first brush icon, click on the empty window. An image of the archive brush appears (look at the arrow).

Now select the History Brush tool. Its parameters are the same as those of a regular brush. Set the desired opacity and hardness and remove everything unnecessary from the image. To do this, move the Archive brush over the place where you want to remove the changes. In my case, it’s in the direction of the arrow. As a result, the red leaves were safely removed from the arrow, but the green ones remained.

In this way you can, for example, blur the background in a photo. First, use a filter to blur the entire photo (don’t overdo it!), and then use the History Brush to return the figure to its previous sharpness.

Restore History (Archive Eraser)

The “Erase to History” function works in a similar way, operating through the “Eraser” tool.

If something unnecessary was removed while working with the eraser, then you can try to return the intermediate version. For my example, I will again send leaves of different colors along the arrow. I will have three brushes on my History palette.

This is what my drawing looks like now.

Let's say now I need to remove the leaves going along the arrow. To do this, select a regular eraser (E key), select the desired brush size ([ and ] keys) and move it along the arrow.

Now we will return the leaves of the same color back to the arrow. To do this, go to the “History” palette. We find the required line (on which we applied leaves of the desired color). Click on it. Place the archive brush icon (arrow 1). We now have the “Erase to History” window active. Now we can check the box (arrow 2).

We go to the very end of the “History” palette, where we erased the leaves, and move the archival eraser along the arrow.

Leaves began to appear. If we move this eraser past the arrow, the leaves drawn after our selected rollback point will be erased.

Another condition for the archive eraser to work is to check the box next to “Automatically Create First Snapshot” in the “History” palette parameters.

The parameters can be found in the “History” palette at the top right in the line with the name of the palette, four horizontal lines.

This tool can be useful if you accidentally erased something with a regular eraser and you need to get it back.

A rather tricky method, but if necessary you can master it.

Restore command

If for some reason the image can no longer be restored using the History palette or other actions, you can use the Revert command. The program will restore the last saved state.
To restore, follow the path: Main menu → File → Revert or press F12.

Conclusion

We looked at five ways how to undo an action in photoshop, which will help you not be afraid to try something new and interesting in your work. If something goes wrong, you can always restore partially or completely the original version.
See you on the pages of the next lessons!
Sincerely, Marina Rubl.