Router is network hardware, allowing multiple devices to access the Internet simultaneously (computers, tablets, smartphones and much more).

Today's range of routers allows you to choose exactly what is most suitable for a particular case.

Review of routers

• There are several models that are optimal for use at home:
• Zte E5501;
• Zte H118N;
• Zte E5502;

Zte ZXA10 f660.

ZTE E5501

• This device supports many interfaces: 4 ports for RJ-45 connector (which allows you to work with data via network interface
• , the cable type is determined automatically);
• operates according to the 802.11n communication standard (2.4 GHz frequency);

There are two non-removable antennas that ensure stable Wi-Fi operation. In addition to the supported interfaces this device

has many other options that make its use quite convenient and simple.

Zte H118N

• A router of this type in its design has:
• USBv.2 in the amount of 1 piece for connecting a 3G modem (optional);
• 4 ports for connecting a cable crimped with an RJ-45 connector;

Wi-Fi (IEEE 802.11n).

The maximum data transfer rate of this device is 300 Mbit/s. Several data encryption technologies are also supported - WEP, WPA, WPA2.

ZTE 5502

• The router in question from such a renowned company is in no way inferior to its classmates:
• 4 ports for cable connection via RG-45 connector;
• supported: IEEE 802.11n (maximum transmission speed – 300 Mbit/s);

there are two antennas for operation in the 2.4 GHz band;

• The encryption capabilities of the device in question are the widest:
• WEP with 64/128 bit encryption technology;
• WPA-PSK;

WPA2-Interprise and many others.

ZteZXA 10 F660

The ZTE router not only has excellent performance characteristics, but also a relatively low price.

• It is easy to set up and also supports all the necessary technologies:
• there are 4 connectors for RG-45;
• 2 connectors for working with the POTS interface (RG-11);
• works successfully with Wi-Fi technology;

There is a connector for connecting USB devices.

Selecting a device

• When choosing a router for your home, you need to consider the following important points:
• ease of setup - so that in case of any problems you can fix them without calling a specialist; price – this question
• especially relevant for those families with many children;
• features of the Wi-Fi module.

The simpler the design of the device, the easier it is to configure. That is why you should give your preference to those routers that do not require dancing with tambourines while connecting and getting started. This will save a lot of time.

Video: How to open a port on the ZTE ZXA10 F660 router

Price range is very important point . Today there is no point in purchasing expensive devices. Since even the youngest models in the line have on board everything that is required for comfortable work with a Wi-Fi network at home. You shouldn’t overpay for a model’s brand – usually such expenses are completely unjustified.

When choosing the best option for the price, you should not purchase very cheap models. Since often the extremely low price is not the most high quality manufacturing, which may lead to failure in the near future.

The Wi-Fi module must have an antenna located outside the case. Since antennas of this type cover a large area. Which is very important if the apartment or house has a large area. Also, the antenna should be removed and replaced if necessary, as it may be necessary to expand the coverage area.

The optimal choice in all respects is the ZTE ZXA10 F660 router. It has many advantages, as well as a fairly low price (considering its pretty good parameters).

PC connection

The easiest part of setting up a ZTE router is connecting it to a PC. This operation is performed in the following order:

Manage Settings

How to set up a ZTE Wi-Fi router? Settings are managed using a WEB interface, which can be accessed through any browser installed on a PC. For example, internet explore. In the address line you should enter the following combination of numbers and symbols - http://192.168.1.1. If the router is connected to the computer according to the instructions, a window will appear in which you can enter your username and password.

The default password and login is the word admin (only with Latin letters). When the fields are filled in, click the “Login” button. Next, a window will appear, made in green and white colors.

At the top there are the following tabs:

• status;
• network;
• security;
• application;
• administration.

Each tab allows you to manage one or another section.

For Wi-Fi settings you should do the following:

Using this list of actions, Wi-Fi is turned on.

Special attention should be paid to the section called “Multi-SSID”.

If desired, this section allows you to make the network both open and closed for various types of devices:

• SSIDName – this item allows you to name the configured network by any name;
• MaximumClients – maximum possible quantity simultaneously connected devices ( this model supports 32 pcs);
• EnableSSID – enable or disable the network being changed;
• HideSSID - hiding wireless network;
• ChooseSSID – select the variable Wi-Fi networks.

Photo: WiFi setup on Promsvyaz modem

There is also a Security section where you can configure the following items:

When choosing a password, it is advisable to follow the following recommendations:

• the presence of lowercase and uppercase letters (in random order);
• The password must be at least 10 characters long;
• The presence of numbers is also desirable.

Setting up a ZTE router for providers

The ZTE ZXA10 F660 router is configured differently, depending on which Internet service provider is (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up work with this operator requires special care, since all the nuances should be taken into account:

In the “Multi-SSIDSettings” and “Security” sections, all settings are set according to the instructions supplied with the device.

Particular attention should be paid to the “AccessControlList” section. The “Mode” item should be set to “Block”. "MACAddress" - 00:13:e0:81:97:ee.

Rostelecom

Setting up a router to work with the Rostelecom provider is not difficult.

You need to do the following:

When the above steps are completed, you should configure the “Multi-SSIDSettings” section:

• in the “ChooseSSID” item set the SSID value;
• check the box next to “EnableSSID”;
• "SSIDName" allows you to select a network name.

After completing all settings, you must click the “Submit” button.

MGTS

To correctly configure the router model in question with the “MGTS” driver, you must perform the following steps in strict order:

This will enable Wi-Fi. The remaining settings are made in accordance with the manual supplied with the router.

It is also imperative to configure a section called Multi-SSID. This section allows you to set a personal identifier for the network, and also, if desired, hide it. All settings are made individually, depending on the personal preferences of the user.

The section called “Securiry” allows you to configure encryption settings and a password for connecting to the network.

The ZTEZxa10 F660 router is the optimal device in terms of price-quality ratio. An excellent choice for home and office. This network equipment is easy to configure, compact, and reliable.

ADSL router ZTE ZXDSL 531 B performs the functions of subscriber equipment and is designed to provide access to the Internet through an existing public telephone line. The list of its capabilities includes:

• connection to an external network;
• creation of an internal high-speed local wired and wireless network;
• support for ADSL, ADSL2 and ADSL2+ standards.

On the front panel of the device there are nine indicator lights that indicate the status of a particular function. The following connectors are located on the back:

• connecting the device power adapter;
• 4 ports for connecting desktop computers or other equipment;
• USB connector for connecting to a PC and servicing the modem;
• power button;
• socket for connection to telephone line;
• button " Hard Reset» to restore all settings to factory settings.

Technical data ADSL modem ZTE ZXDSL 531 B

Device type - ADSL modem, router, access point;

Supported data transmission standards - ADSL, ADSL2 and ADSL2+;

Type local network- wired and wireless;

User interface:

• connector for connecting the device power adapter;
• 4 Ethernet ports 10/100 Mbps;
• USB connector;
• DSL telephone line connection port;
• Wi Fi (maximum data transfer speed - 54 Mbit/s);
• button quick reset settings.

Setting up the ZTE ZXDSL 531 B router

All client equipment is configured by company specialists during the process of connecting the subscriber to the Internet. If a device malfunctions, you can re-enter data yourself. Setting up the ZTE 531 B connection to the Internet.

1. You need to configure the network card of your computer or laptop to work correctly with the modem. To do this you need to open properties network connection, find the TCP/IP v4 data transfer protocol and make the following changes in it:

• switch address acquisition to manual mode;
• specify the following values ​​in the fields: IP - 192.168.1.2; mask - 255.255.255.0; gateway - 192.168.1.1;
• After changing the values, click OK.

2. Enter the settings menu. When you are done with the network card settings, you need to:

• open any convenient browser and enter address bar value 192.168.1.1;
• in the authentication window that opens, specify the login and password for the interface (by default, login is admin or ZXDSL, password is admin or ZXDSL) and click on the “OK” button.

3. At the top of the newly opened window, go to the “Advanced” tab. In the side navigation bar, first go to “WAN” and then “Internet”.

4. Check with the service technical support provider VPI and VCI values. If the connection table does not have a row with similar data, then it must be created manually.

5. On the data transfer protocols settings page, check the box next to PPPoE, and in the drop-down list located at the bottom of the screen, select the “LLC/SNAP” value.

6. Check the Automatically Obtain IP box and enable the NAT function.

7. In the next window, enter all the data that is specified in the Internet connection agreement (user name and access password) and check the box next to the “Always On” value.

8. Check that all data in the table is entered correctly and click on the “Apply” button.

The system will indicate that a reboot is necessary for the changes to take effect. Confirm this action by clicking on the “Finish” button. After the reboot process, a window will open in which you need to click on the “Connect” button. If all settings are made correctly, the modem will automatically restore the connection and provide access to the Internet.

Setting up a Wi-Fi network

To make changes to the Wi-Fi wireless network settings, you must perform the following steps:

• make sure that the connection wire to the telephone line is disconnected, and all others, according to the connection method in the ZTE 531 B instructions, are in place;
• exactly follow all the steps described in point 2. Enter the settings menu;
• at the top of the screen go to the “Wireless” tab;
• in the “Basic Settings” item side menu check the box next to Enable Wireless Network, enter the name of your wireless network in the SSID field and click the “Apply” button;
• Next, go to the “Security” tab in the sidebar and change the following values: connection security type - WPA2-PSK, data encryption type - AES, format - ASCII, enter a new network access code in the Pre-Shared Key field;
• After making changes, click on the “Apply” button.

If you encounter difficulties while operating the ZTE ZXDSL 531 B ADSL modem and you are unable to configure the equipment yourself, contact MGTS subscriber support for advice or call a technician to troubleshoot problems.

4G/ WiFi router The ZTE MF90 is quite extraordinary for 2015-2016 (it was then that the modem first appeared on the “mass” market), but at the same time, a high-quality device that satisfies the basic requirements for the functionality and mobility of a router.

It should be noted right away that the device is “locked” to work with the Beeline operator, and is sold mainly through the sales offices of this provider.

ZTE mf90 router specifications: review and specifications

For a fairly reasonable price (around three thousand rubles), Chinese developers have provided a high-quality mobile router with competitive characteristics.

1. Data transfer rate:

• - with “LTE FDD” up to 100 Mbit/s – when receiving, and up to 50 Mbit/s – when transmitting;
• - with “DC-HSPA+” up to 42 Mbit/s – reception, and up to 5.76 Mbit/s – transmission;
• - with “EDGE/GPRS” up to 236 Kbps.

2. Card support micro memory SD up to 32 GB.

3. Lithium-ion battery 2300 mAh.

These characteristics fully ensure comfortable surfing on the Internet: the battery allows you to freely use all the benefits of the Internet for 6-8 hours.

Zte mf90 router: indicators and connectors

Due to its mobility, the router had to “sacrifice” the indicator part.

There are only three indicators on the front of the device:

• - "Battery charge". When the indicator lights up or flashes red, you need to charge the battery. If the light flashes green, the battery is charging (the charge level is not lower than average or the battery is fully charged).
• - “Network signal level”. The indicator is constantly “on” red - there is no signal, or “USIM” is not installed. “Lights” in green - registration in the 2G/3G network, “blinks” green - the router is connected to the network and data is being transferred, if the indicator is “lights” in blue, this means that the device is connected to the 4G network.
• - « WiFi network" If the indicator “blinks” blue, the wireless network is turned on; if it is “on,” then “WPS” is turned on.

Below the indicator panel are the “Power” and “WPS” buttons, which are also designed to enable or disable the wireless network (pressed once), but if you hold the button for 5 seconds, the “WPS” mode will turn on.

On the side there are two connectors for connecting 2 additional antennas and a “mini-USB” connector - for synchronizing with a computer or connecting a charger.

Inside the case there are two slots for the battery: one for “USIM”, the second for “microSD”. And on the opposite side of the router - relative to the side buttons - there is a recess with a “Reset” button (i.e. reset to factory settings).

How to connect a zte mf90 modem yourself?

The procedure for connecting the zte mf90 router is as follows:

Open the cover and insert it into the corresponding “USIM” slot of the Beeline operator.

• - Pay attention to the sticker inside the case, where the “SSID” of the wireless network is indicated (indicated in the format MF90_XXXXXX, where x is unique number, assigned to each device) and password. Remember them - this data will be useful to you in the future.
• - Install battery and close the lid.
• - Use the “Power” button to turn on the device (the corresponding indicators will light up) and connect the router and computer with a “USB cable”.

• - Search for available wireless networks (based on the “SSID” name obtained above) and connect to the network by entering the password.
• - Next, enter 129.168.0.1 or m.home in the address bar of the browser (the default password is “admin”).

To change the password to enter the settings of the zte mf90 router, use the “Management” section. Here you can also configure the energy saving mode, the USIM pin code and the settings for sending SMS messages.

How to set up an Internet connection on a zte mf90 router?

Internet access is configured through the router interface.

The first step is to “Activate the starting balance”:

Open the “Service Management” section;

In the drop-down menu, select “Activate starting balance”;

Click the "Activate" button.

If payment will be made using Beeline payment cards, in the “Service Management” section, select “Payment Card Activation” and enter the digital card code (without using spaces or hyphens).

You can also use the “Request funds from another subscriber” service: in the same section, select “Ask money from another subscriber”, enter his phone number without the eight and click “Send”. All you have to do is wait for payment. But you should not abuse this service, as there is a limit - you can send a request no more than 5 times a day.

To complete the settings, you only need to click on the “Connect” button and select one of the connection modes:

• - if you select “Automatic”, then when you turn on the device will independently connect to the Internet;
• - if you set it to “Manual”, then to gain access to the Internet every time you turn on the device you will need to visit the web interface.

How to set up wifi on zte mf90 router?

To set up a wireless network, go to the “WiFi” section and do the following:

• - enter the name of the network in the “Network name (SSID)” line;
• - check the “Enable” box in the “Transfer network name (SSID)” line;
• - “Network encryption type” leave “WPA-PSK” - “WPA2-PSK”;
• - in the “Password” line, enter the security key to connect to the network being created;
• - in the “Maximum connections” line, set the maximum number of devices that will use this network(but no more than 10).

In the “Firewall” section, you can configure filtering and port forwarding, as well as enable and disable “UpnP/DMZ”.

The “Router” section allows you to change the “IP address” of the router, get acquainted with its “mac-address” and configure the “DHCP server”.

In chapter " WiFi Internet"You can configure and use the mf90 as a repeater.

In summary, the 4G/WiFi router ZTE “MF90” is an excellent mobile option at a relatively low price, opening up extensive opportunities for web surfing in transport, at work or in any other places where the use of standard routers is unacceptable.

Unlocking Beeline router zte mf90

Unlocking (unlocking) the ZTE MF90 router, and, in principle, all other routers tied to the same provider, is not a difficult task, but it requires attention (and a basic understanding of where everything is on the computer).

1. First, download and unpack the firmware that allows you to unlock your zte mf90. Finding it will not be difficult: with any request like “How to unlock the MF90 router”, many options will appear where you can download this very archive.

4. Now you need to put the router into diagnostic mode. Go to "http://m.home/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY".
Please note that the diagnostic mode is a temporary setting, so do not hesitate and immediately proceed to the next step.

5. New equipment with the name “ZTE Mobile Broadband DiagnosticsPort” will appear in the “Device Manager” - open the “Ports” section and remember which port is assigned to COM4 or COM13.

6. Place the file with “.bin” resolution from the downloaded archive in the root of the “C:” drive.

8. Disconnect and reboot the router.

Finally, you can use any convenient binding checking utility to check whether your router is unlocked or not.

Modern smartphones can no longer be imagined without their functionality, most of which is based on access to world wide web. Owners of ZTE gadgets often encounter a problem when the device does not see Wi-Fi and refuses to connect to Wi-Fi. The worst that can happen is the wi-fi module fails, but this is far from the only scenario. There are also simpler faults, in this article we will look at them, in addition, here you will find tips that may be useful in solving the problem.

If we take into account the statistics, then most often the cause is incorrect settings of the phone or router itself, so we’ll start with them.

Router

This is especially true for those who are trying to connect to the Internet for the first time on a new smartphone. Usually, when you first connect, the router sets up an automatic configuration, which is modified by a wizard sent to you by your provider. It is impossible to exclude the possibility that this specialist did not uncheck the “deny connection to other devices” box. The menu can also contain the names of gadgets that have access. All this must be checked to correct the error.

you can find detailed instructions to your router model on the official website of the developer or on thematic blogs, now there are plenty of them. Drive into search bar browser corresponding request and select the most suitable site. When you are convinced that the problem is not with this device at all, feel free to move on to the next tip.

First, about banal, but at the same time popular errors, go to the menu and look:

• Have you activated wi-fi?
• Is airplane mode turned on?
• Is the correct internet name selected?
• Is the password entered correct?
• Is data transfer via SIM allowed?

This is indeed a list of the most pressing issues in this case; excluding these reasons, we can safely talk about a module failure. Follow further instructions and you will complete the task in a matter of minutes.

• Click on the gear icon.
• Find a section
• Move the slider to “on” mode.
• Click on the section and select the name of your Internet from the list of found options.
• Click on it and in the window that appears, click the “delete” button.
• Search for available connections again and connect to your modem again.
• Retype your password. Wait until the download completes. If an error appears, try to restart your smartphone, and if this does not work, read on.
• Turn off airplane mode, it's very easy. Swipe your finger across the screen from top to bottom and a list of available actions will appear. Here you will see the function you are looking for, deactivate it and that’s it.

Then you can restart the phone system again, it should work.

Software glitch

Lastly, read the instructions on hard rebooting and resetting settings; these manipulations help in almost all incomprehensible situations with system problems.

• Press two physical buttons simultaneously, “on” and “+”, aka volume up.
• Wait a few seconds until the indicators light up.
• Remove your fingers and wait for the green robot to appear.
• The recovery process will take a few minutes, after which the gadget will reboot.

That's all, enter all the necessary data as when you turned it on for the first time, including Wi-Fi.

• Go to the flagship menu and follow - “restore and reset” - “reset all settings” - “ok”, everything else is the same as in the previous tip.

ZTE ZXA10 F660 router is a modern network equipment necessary for connecting to the worldwide information network via fiber optic line (GPON technology). In terms of its functionality, it is both an ONT terminal and a Wi-Fi router, capable of distributing the Internet both via an Ethernet cable and using wireless communication with the end device.

In addition to the standard capabilities of the zxa10 f660 router, it also provides IP telephony function and the ability to create a local Web server based on the router.

And this article presents step-by-step instruction on setting up the zte zxa10 f660 router from MGTS, and also discusses some of the subtleties of connecting this device.

ZTE zxa10 f660 router: technical specifications and design features

The gpon ont zxhn f660 router is an economical mobile wifi transmitter with a main operating frequency of 2.4 GHz.

The router's functionality provides data transfer speeds over Wi-Fi up to 300 Mbit/s, while the device supports up to 4 SSIDs with simultaneous connections of 128 users to each network.

The zte f660 router also supports WPS mode, so the device can be used to expand the WiFi zone of another router.

On the back of the router are located:

• - standard LAN connectors for connecting devices to the zxa10 f660 via an Ethernet cable;
• - two POTS connectors for implementing the IP telephony function (for connecting an RJ-11 telephone cable);
• - two USB connectors for connecting external media (including for updating the device firmware and organizing a local Web server);
• - POWER connector for connecting a power adapter;
• - buttons to turn on/off the WLAN and WPS functions;
• - RESET button to reset the router settings to factory settings;
• - router on/off button.

The GPON connector for connecting the fiber optic cable provided by the provider can be located either on the back or on the side panel of the zte f660 router.

Connecting a zte f660 modem

1. Connect the power supply (supplied with the device) to electrical outlet 220V, and its plug goes into the socket intended for it on the rear panel.

2. Connect the optical cable with the green plug to the intended port, and its other end to the socket.

3. Insert the plug of the patch cord (Ethernet cable) into one of the four LAN sockets, and its other end into the connector network card the computer from which you will enter the router settings mgts gpon zte zxa10 f660.

When you connect the router to the PC, the indicator corresponding to the active LAN connector should light up on the front panel of the device. If this does not happen, it is recommended on this computer.

How to configure zxa10 f660 router?

Connection, testing and configuration of optical communications are usually carried out by specialists from the communications service provider.

If you install optical fiber yourself zte modem f660, then call the provider’s service department, ask to set up the equipment and follow the specialist’s instructions.

Router zte zxa10 f660: WiFi setup

1. Launch any Internet browser installed on your computer and enter http://192.168.1.1 in the address bar.

In the field that appears, enter the login: admin, password: admin and enter the configuration interface of your device.

2. A menu with tabs will appear in the window that opens: “Status”, “Network”, “Security”, “Application”, “Administration”.

3. Go to the “network” tab, the “WLAN” submenu and its “Basic” submenu.

In the “Wireless RF Mode” column, select the “Enabled” option.

• - Next, “Mode” must be set to “Mixed802.11b+g+n” mode.
• - “Country/Region” - “Russia”.
• - “Chanel” - “Auto”.
• - “Transmitting power” - “100%”.

4. Click the “Submit” button, then go to the “Multi-SSID Settings” subsection.

In the “Choose SSID” column, select “SSID1”.

• - Check the “Enable SSID” checkbox (Check that this checkbox is unchecked in other SSIDs).
• - Come up with a name for your network and enter it in the “SSID Name” field.

5. Click the “Submit” button again and go to the “Security” subsection.

- Here in “Choose SSID” select the first option.

• - Set “Authentication type” to WPA2-PSK.
• - Create a Wi-Fi network password and enter it in the “WPA Passphrase” field.

The password must be unique and contain at least 8 Latin characters. It is not recommended to set standard and easy-to-guess passwords (for example, your home address) to avoid unauthorized connections to your WiFi network.

How to change the password for the MGTS zte f660 router?

To set a unique administrator password used to enter the settings of the MGTS gpon zte zxa10 f660 router, go to the “Administration” menu and the “User Management” submenu.

- Switch “User Right” to “Administrator”.

Enter your old password in the "Old Password" field, and New Password in the “New Password” and “Confirm Password” fields.

It is also recommended to disable the WPS function before using the zte f660 router. To do this, press the corresponding button on the back of the device.