Almost every one of us periodically faces the need to connect our smartphone to a personal computer. This is necessary primarily for transferring files, as well as for recharging the phone in emergency situations. However, not every new owner similar device can figure out how to connect Huawei to PC. In this article, we will cover all available ways performing such a task.

How to connect Huawei to a computer via USB

If you are faced with the question of how to connect Huawei to a computer via usb, you can use the simplest and most convenient way. The steps to be taken are:

• We take the USB cable that comes standard with Huawei;
• We connect to a computer;
• Phone connection drivers begin to install;
• The phone is connected.

Thus, the user manages to quickly determine his gadget on the computer. After that, it is often possible to transfer files and perform other equally important tasks. It is important not to interrupt the installation of drivers on Huawei, because later some difficulties may arise when you try to connect the gadget to your computer again.

How to connect Huawei to PC using HiSuite

The second way is to use the HiSuite utility, which helps you perform many useful operations. In particular, with its help you can open the synchronization of contacts, activate access to photos, as well as access to all files in general. This takes into account both those files that are stored in the device's memory and those that are located on the MicroSD card. Moreover, this way you can read and edit messages, and generally use the basic options of a smartphone.

To activate the connection of the Huawei phone to the computer using the specified program, you will need to download the archive with the files to install the program. After that, in the settings of the communicator, you need to set the USB Debugging Mode. On the PC, we install a program that will launch the utility needed to quickly connect the honor Huawei honor.

Thus, it is possible to quickly display all the necessary data on the screen of your personal computer. The actions that a user can perform using such a utility are broader than with simple connection smartphone through the explorer. At a minimum, the synchronization process is much simpler here: in a personal PC, you can synchronize it much easier than in standard mode.

When a smartphone is connected, the mode may be activated. "charging only". So the gadget will not transfer data to a personal computer, but it will be recharged. In addition, the computer can display information about what he saw Huawei.

Also, the user of the utility will be able to set the mode "Photo". It is the most convenient for transferring photos from an SD card (by the way, in this option you can only work with it).

Possible problems and solutions

When connecting a Huawei smartphone to a PC, some problems may occur. For example, if a user tries to establish a connection in the standard way when connecting through a standard explorer, it happens that the system simply does not see Huawei. In this case, it almost always helps to install specialized utility HiSuite. It helps to establish an optimal connection between the gadget and personal computer, which makes it possible to perform not only standard operations, but also to get more opportunities.

You can always try to reinstall the drivers, because the ability to display the gadget on the screen depends on them. If this does not help, it is most rational to try connecting the smartphone to another personal computer.

In some situations, problems arise due to incorrect work wires. If the cable is damaged, it is worth replacing it with a new one, because significant success cannot be achieved when working with it.

How to connect Huawei?

To access the global network, you can use a USB modem. The adapter is easy to install and convenient to use. An alternative to Internet access is a Wi-Fi router. In the article we will talk about the inexpensive Chinese brand Huawei.

How to connect and configure a Huawei USB modem

Most models of Huawei USB dongles connect to the network after the device and computer are connected. No installation required software manually, which greatly simplifies the work. In addition, according to users, the modem transmits data at a higher speed than its competitors.

Huawei cooperates with various operators cellular communication. But when buying a modem from one of the operators, you will not be able to change the SIM card. This will require a flashing of the device. After changing the software and settings, you can make the device available to all mobile operators.

In addition, the modem can be used as a regular flash drive: the device has a slot for a memory card (the card is purchased separately).

1. Unpack the kit and check the contents: USB modem, SIM card, extension cable and instructions for setting up the device.
2. Insert the SIM card into the designated place in the modem.
3. Turn on your computer or laptop and wait for it to fully boot operating system.
4. Insert the modem into the computer's USB port (for a higher connection speed, use an extension cable or use the USB port on the back of the system unit).
5. Next, wait until the computer detects a new device (an icon will appear on the desktop taskbar).
6. The installation wizard then proceeds to automatically configure the software.
7. If the installation wizard does not respond, then double-click on the AutoRun.exe file and run the program.
8. Next, follow the instructions of the installation wizard, along the way taking license agreement(during installation, do not disconnect the modem from the computer or laptop).
9. When the installation is complete, you will see a shortcut on your desktop.
10. Click on the shortcut that appears and click the "Connect" button.
11. The device is ready to work.
12. To disconnect the modem from the computer, click on "Safely Remove" and only then disconnect the adapter.

How to connect and configure a Huawei router

You can use a Wi-Fi router to access the Internet. Via this device you will not only get access to the global network, but also be able to create your own home network and access the Internet from multiple devices at the same time.

1. Open the box and check the contents: router, network cable, power supply, installation disk, manual for use and setup.
2. If the router does not come with a built-in antenna, then it should be included in the package.
3. Next, you need to connect the router to a PC or laptop: connect the cable to the LAN connector of the device, and connect the other end to the computer (to the network card).
4. If your computer has a built-in Wi-Fi module, then you can connect devices via the WPS function (if the option is supported by both the device and the computer). To do this, hold down the WPS button on the side or back of the router for a few seconds and wait for the connection.
5. If you want to create local network, then connect the Internet cable to the WAN (INTERNET) connector on the router. If you just want to connect a computer and a router, then the cable can be omitted.
6. Next, go to address bar browser and enter IP 192.168.1.100.
7. Press the Enter button.
8. Then you need to enter the username - admin and password - admin.
9. Next will begin auto tuning router: follow the installation instructions.
10. When the installation is complete, click the "OK" button and close all windows.

Check out our section

Almost every one of us periodically faces the need to connect our smartphone to a personal computer. This is necessary primarily for transferring files, as well as for recharging the phone in emergency situations. However, not every new owner of such a device can figure out how to connect Huawei to a PC. In this article, we will look at all the available ways to accomplish such a task.

Video: How to connect a Huawei phone to a laptop or computer

Two ways to connect a Huawei Honor smartphone to a computer

Connect smartphone Huawei Honor There are two ways to connect to a computer:

• 1 way using the "Explorer" of the computer;
• 2 way using HiSuite utilities.

The exchange of files between a mobile device and a computer is very simple: take a USB cable and use it to connect the phone to the computer.

After a short pause, during which the computer loads the necessary drivers for connecting via a USB channel for the first time when connecting to a mobile device, a message will appear on the phone screen « USB-compound" with three menu items:

• Photo transfer;
• File transfer;
• Only charging.

To exchange files, you must select a position "File transfer».

After that, two windows will appear on the COMPUTER screen:

How to connect a Huawei Honor smartphone to a computer via USB

This method for many PC users is the simplest and most effective, which allows you to download a collection of photos from a mobile device or record a movie on your phone as soon as possible.

To implement this method, in the first window of "HUAWEI P smart" to open the "Explorer" of the computer, select the position "Open device to view files".

In the newly opened window, select « internal memory» smartphone HUAWEI P smart.

In the next window of the "Explorer" we will be presented with all the folders of the smartphone available for work. Here, entering the appropriate folder, we can perform operations on the smartphone files on the computer (copy, rename, delete) or copy files from the computer to these folders.

After the end of the file exchange, you need to disconnect the mobile device from the computer, for this, in the lower right corner of the computer screen, select the USB device icon and then select the item "ExtractHuawei P smart» .

And only after that we disconnect the cable.

At this point, the data exchange session between the computer and the smartphone can be considered completed.

Connecting a Huawei smartphone to a PC using HiSuite

The second way is to use the HiSuite utility, which helps you perform many useful operations. In particular, with its help you can open the synchronization of contacts, activate access to photos, as well as access to all files in general. This takes into account both those files that are stored in the device's memory and those that are located on the MicroSD card. Moreover, this way you can read and edit messages, and generally use the basic options of a smartphone.

To activate the connection of the Huawei phone to the computer using the specified program, you will need to download the archive with the files to install the program. After that, in the settings of the communicator, you need to set the USB Debugging Mode. On the PC, we install a program that will launch the utility needed to quickly connect the honor Huawei honor.

Thus, it is possible to quickly display all the necessary data on the screen of your personal computer. The actions that a user can perform using such a utility are wider than when simply connecting a smartphone through Explorer. At a minimum, the synchronization process is much simpler here: in a personal PC, you can synchronize it much easier than in standard mode.

When a smartphone is connected, the mode may be activated. "charging only". So the gadget will not transfer data to a personal computer, but it will be recharged. In addition, the computer can display information about what he saw Huawei.

Also, the user of the utility will be able to set the mode "Photo". It is the most convenient for transferring photos from an SD card (by the way, in this option you can only work with it).

Common Problems Connecting Huawei Honor to PC

When connecting a Huawei smartphone to a PC, some problems may occur. For example, if a user tries to establish a connection in the standard way when connecting through a standard explorer, it happens that the system simply does not see Huawei. In this case, the installation of a specialized HiSuite utility almost always helps. It helps to establish the optimal connection between the gadget and the personal computer, thanks to which it is possible to perform not only standard operations, but also to get more opportunities.

You can always try to reinstall the drivers, because the ability to display the gadget on the screen depends on them. If this does not help, it is most rational to try connecting the smartphone to another personal computer.

In some situations, problems arise due to incorrect wire operation. If the cable is damaged, it is worth replacing it with a new one, because significant success cannot be achieved when working with it.

USB debugging when connecting Huawei Honor to a computer

From time to time, it becomes necessary to “reset” data from a smartphone to a computer (and vice versa). Well, if the volumes are small, then they can be safely transferred, for example, through email, file exchanger or cloud. But this is completely unacceptable when you need to download an archive of photos, a collection of music, or an entire season of a series. How to connect Honor to a computer and quickly “transfer” the necessary information?

Most fast way data transfer via USB cable bundled with a smartphone. Of course, you can use cables from other devices (for example, cameras, players, etc.), but some of them sometimes have a different pinout on the plugs, which is only suitable for charging the phone and nothing more.

Connecting to a computer

We take the cable and connect it with one side to the smartphone, and the other - to USB port your computer (laptop). It is assumed that you have already installed a more or less modern version of the operating system (Windows 10 or 7) and you do not have to manually install additional drivers.

Unlock the phone and in the notification shade, click on the USB charging notification that appears.

A list will open options connection, in which, to work with file system smartphone, select the “File Transfer” item and proceed to work on the computer (the smartphone can be blocked).

Working with smartphone files on PC

On the desktop of the computer or in the quick launch bar of the Start menu, click on the icon “My Computer” or “Explorer” and in the “This Computer” section we are looking for a new device, the name of which, as a rule, corresponds to the name of the connected smartphone.

Click on it and go to the conditional list of disks that the mobile device contains. In the event that a microSD is installed in the smartphone, in addition to “Internal memory” (device memory), there will also be an SD card (external memory).

Depending on the needs, we click on the required disk and work with it in the same way as it is done with regular files and folders on your smartphone (copy, cut, delete files, create folders).

For example, to upload photos from Smartphone Honor on the computer, you need to go to “Internal memory” (if recording photos to a microSD card is not selected in the camera settings), go to the DCIM folder, select the Camera folder in it and all the photos and videos captured on the smartphone are already there.

We select all (or only the necessary files) and copy them to our computer, after the files are copied to the PC, they can be deleted from the smartphone.

After the work with the file system of the smartphone is over, it can be disconnected from the computer without any additional steps. While connected to a PC, the mobile device will continue to receive calls, messages and other information, that is, the connection will not affect the operation of the phone.

How to set internet settings on Huawei devices.

In addition to the usual problem, which service package to order from mobile operator, often device users Chinese made Huawei asks the question "how to set the Internet settings on your device."

After all, the Internet connection mobile devices in our age, this is almost the most important thing. Almost all mobile applications work with connection. But how to watch the news or find out the weather forecast with the help of your little assistant?

We recommend that you first make sure that tariff plan includes internet connection service. If one is not connected, then you can simply additionally buy this service from your operator. This can be done through a computer, you can also contact the operator or walk to the nearest call center.

As a rule, the connected Internet service is switched on automatically. But if for some reason automatic connection did not happen, then you will have to enter all the data yourself. Our material is designed specifically to help you enter these settings correctly.

Just follow our instructions exactly below.

1. Go to the settings menu, and enter the "Wireless Networks" tab.

2. Then go to the "Mobile network" window.

3. There we select the item "APN access point".

4. To create a new access point in the "Function" tab, look for the line " New point access".

5. In some empty fields that appear on the screen, we will enter the necessary data. This data is provided by your chosen carrier. For each of the providers, data is provided on the websites of the mobile companies themselves.

We fill in all the fields carefully, it largely depends on whether the Internet will be connected after the operation. Usually you need to specify a username, access point address, password.

We will provide the settings for several of the operators as an example. Find out the rest on the official websites of your providers.

Data for MTS operator.

APN-internet.mts.ru

Username - mts

The password is mts.

Data for BeeLine operator.

APN – internet.beeline.ru

Username – beeline

The password is beeline.

Data for the operator Megafon.

APN-Internet

Password - not entered

Data for the Tele2 operator.

APN-internet.tele2.ru

Username - not entered

Password - not entered

6. Usually, after saving the settings, it will not be superfluous to restart the device. This will activate the account.

7. If you fail to connect to the network, there is a possibility that you did not fill in any of the items correctly. Please check all fields again. It is also possible that your device is not working properly, namely in the Internet settings category.

Also, if you are not able to set up the connection yourself, you can safely contact the call center and they will be happy to help you there. But, in our experience, the provided algorithm works in most cases.