Download universal usb bus controller. The USB Universal Serial Bus controller is not installed -. Utility from Intel

Probably every user had to use flash drives or USB mice and keyboards. These peripheral devices connect to the Universal Serial Bus - USB. A USB controller is used to interface this bus with the software logic. In 2008, the USB 3.0 specification appeared along with new cable standards and more high speed data transmission.

To install the driver, you need to first download the ZIP archive from the “Files” section. After that you need to unpack it into separate folder and run the setup.exe file. Then follow all instructions. On Windows 8 this driver is already built into the system and does not need to be installed separately.

The presented driver is suitable for the following chipset and processor models:
Intel 7 Series / 8 Series / 100 Series / C216 / C220 / C610 (chipset family), 3rd, 4th, 5th and 6th generation processors Intel Core, 2nd generation Intel Core i3, i5, i7 Extreme processors, Intel Pentium or Intel Celeron N-& J-Series processors, Intel processor Core M.

USB is translated from English as Universal (Universal) Serial (Serial) Bus (Bus). Now it is quite difficult for you to imagine a modern PC without such a small but quite important component. Oddly enough, so that users could calmly and simply (at first glance) exchange files between PCs and other devices, in the past a large number of engineers worked on this component. Well, in order for this component to work with a PC, it comes with a controller board that ensures operation.

To operate, the controller requires a driver, which is selected according to the motherboard included with your PC. You're lucky if you know which motherboard powers your computer - you won't have a problem typing in search engine support site and download bus controller USB Windows 7.

But what if you don't know? Don't worry, fortunately, there are programs that can help you determine your motherboard model. They will be discussed below.

Utility from Intel.

If there is a small sticker from this corporation somewhere on your computer, or you just know that the computer is built on the basis Intel Motherboard, then use the official utility. It is intended for identification purposes and provides system information and technical data. After that on the site Intel Using a convenient search, you will quickly find the driver you need for the bus controller USB, specifying the model.

PC diagnostic utility - AIDA.

Now let's move on to a slightly different program. In my opinion, it is better, more convenient and more functional. Called AIDA64. It will help the user if on Windows 7 USB device It’s not clear what to do in an elementary way. In theory, this is the good old Everest, which was previously released on the basis AIDA32, but now the developers have decided that its time is over, and now AIDA already in a new design and with big amount functions helps users solve pressing problems, or simply be aware of the system.

The program's capabilities are very wide - you can view PC components, test their operation and performance, view information from temperature sensors, manage the system and programs, and do much more easily and naturally.

Choose the option that suits you best. Once you have determined which motherboard you have on your PC, e.g. Intel, maybe Gigabite or Acer, or some other one, then find the official support site through the search system.

We hope this article was relevant and useful to you, and you solved the problem by identifying the system. Share your opinion below, it is important to us. Thank you.

Over time, in the world of high technology, more and more devices appear that can be connected to a computer or laptop via a USB port. If previously such devices mainly included office equipment (printers, faxes, scanners), now you won’t surprise anyone with mini-refrigerators, lamps, speakers, joysticks, keyboards, smartphones, tablets and other devices that connect to the computer via USB. But such equipment will be absolutely useless if the USB ports refuse to work. This is precisely what accompanies the problem with the universal controller. serial bus. In this lesson we will tell you more about how to “breathe life” into non-working ports.

First of all, let's figure out how to determine that you have a problem with the USB Universal Serial Bus controller. Firstly, in "Device Manager" you should see the following picture.

Secondly, in the properties of such equipment in the section "Device Status" error information will be present.

And thirdly, the USB connectors on your computer or laptop simply won’t work. Moreover, either one port or all of them together may not function. It's a matter of chance.

We bring to your attention a number of simple but effective methods that will help you get rid of an unpleasant error.

Method 1: Installing original software

In one of our lessons we talked about how to download drivers for USB ports. In order not to duplicate information, we recommend that you familiarize yourself with it. There is a paragraph in which we described the process of downloading and installing software from the official website of the motherboard manufacturer. Follow all these steps and the problem should be resolved.

Method 2: Automatic driver search

We have already mentioned several times special programs, which automatically scan your system and identify equipment whose software needs to be installed or updated. Such programs are a universal solution to almost any problem related to finding and installing drivers. For your convenience, we have reviewed best solutions similar plan.

The best option would be to use the famous program DriverPack Solution. Due to the fact that it has a large audience of users, the base of supported devices and software is constantly updated. It is quite simple to use and you should not have any difficulties. If they do appear, we recommend reading our special instructions for use. DriverPack Solution.

Method 3: Manual software installation

This method helps in 90% of such cases. Here's what you need to do:

Let's go to "Device Manager". You can do this by right-clicking on the icon "My computer" on the desktop, and selecting the item in the context menu "Properties". In the window that opens, in the left area you just need to click on the line that is called - "Device Manager".

In the search we are looking for equipment with the name "Universal Serial Bus Controller".

Click on the name itself right click mouse and select the item in the menu that appears "Properties".
In the window that appears, look for a sub-item with the name "Intelligence" and go there.
The next step is to select the property that will be displayed in the area below. In the drop-down menu we need to find and select the line "Equipment ID".

After this, you will see in the area below the values of all identifiers of this equipment. Typically there will be four lines. Leave this window open and move on to the next step.

Let's move on to searching for software for equipment using ID.
At the top of the site you will find search bar. Here you need to insert one of the four ID values that you learned earlier. After entering the value, you must press "Enter" or a button "Search" near the line itself. If searching for one of the four ID values does not produce results, try inserting another value into the search string.

If the software search was successful, you will see the result below on the site. First of all, we sort all the software by operating system. Click on the icon of the operating system that you have installed. Don't forget to take into account the bit depth.
Now we look at the software release date and select the latest one. As a rule, the most latest drivers are in the first positions. Once selected, click on the floppy disk icon to the right of the software name.

Please note that if more than latest version file, you will see the following message on the download page.

You need to click on the word "Here".
You will be taken to a page where you need to confirm the fact that you are not a robot. To do this, simply put a tick in the appropriate place. After that, click on the link with the archive, which is located just below.

Downloading will begin necessary components. At the end of the process, you need to open the archive and extract all its contents into one folder. The list will not include the usual installation file. As a result, you will see 2-3 system components that will have to be installed manually.

On some laptops, after installing the system, the USB socket, called a USB 3.0 port, stops working. This USB does not see the flash drive and the mouse does not work from it.

The USB device is not recognized after automatic update drivers

In this case, if the mouse or USB flash drive is not detected, then in the Device Manager you will see that the Universal Serial Bus Controller item displays yellow Exclamation point. This yellow sign means that the USB Universal Serial Bus driver is not installed.

How to enable USB ports

If they stopped working USB ports then you need to first with via USB cord to connect the phone to this port. If the phone starts charging but still does not recognize the USB, then the port is physically intact and it’s all about the drivers. In this case, installing or reinstalling the USB 3.0 drivers and the USB serial bus controller will not help you, but installing the video card driver for your laptop model will help. The video driver is usually located on the CD that comes with the laptop, and if it is not there, the video driver can be downloaded from some special internet service for example http://notebookclub.org/drivers/asus.html.

If USB ports are disconnected, try installing a video driver

By opening this service in your browser, you need to find drivers for your laptop model and download only the driver for the video card. After installing this video driver on your laptop, you will need to restart the laptop. After this, the universal USB bus controller driver will be installed correctly and your port will begin to see flash drives and the mouse will work from it.

Editor's Choice

USB Universal Serial Bus Controller will not install - [Problem Solution]

Universal Serial Bus Controller updated interface version 3.0 added problems for computer users with this modern high-speed port.

Contents:

Often after Windows reinstallation There are problems with the installation of the driver that controls the functioning of the ports. As a result, the new USB ports do not function.

This entails the inability not only to take advantage of the interface for faster data exchange with external portable drives, but also does not allow you to connect many peripheral devices and storage media.

This especially applies to, where there are several connectors of the 2nd and 3rd versions.

Since the problem primarily applies to PCs running Windows manual 7, we will consider the way out of it using the example of this operating system. Although for newer ones Windows versions The process will be similar, unless on the website of the laptop or motherboard developer you will have to indicate the edition and bitness of the operating system.

Why does this happen?

The answer to the question why software It is not installed for the controller, it is quite simple.

Alas, in both cases you need to download and install the driver. And you should absolutely not do this through the update center.

Even if the operating system copes with the task, it will choose the most suitable software, in its opinion, and it may not be the latest version or even developed not by the manufacturer of the hardware component, but by programmers from Microsoft who do not have the entire body of knowledge about the operation of a particular device.

This driver is not suitable for us.

Download files from the support site/hardware developer

Official page of the company that developed the laptop or motherboard– the most reliable source of the latest utilities for your equipment.

It is best to get an installer downloaded from the official website of the company involved.

Detailed instructions No one will cite this, because there are a lot of developers, and all their sites are quite different, but we will note the main point.

It lies in the fact that on most resources you will have to indicate the used operating system and its capacity. You can find it out from the properties My computer.

Rice. 4 – We look at the bit depth of the OS used

Sometimes a model or laptop is also required.

This information is in the instruction manual, it can be obtained through HWInfo or a similar utility, and even from the warranty card.

After downloading the installer, open the Manager through the “Properties” of My Computer or call context menu this directory and click “Manage”.

With any method of opening a window, click on it in the window that opens.

If the device is defined as "Universal USB Bus Controller...", delete it. Otherwise, let's move on.
Run the downloaded installer and install.
At the end of the process, restart the computer.

We determine the required software by its ID

Are you a complete idiot and don’t know where to find a model? motherboard or on the developer's website? Not scary. You shouldn’t get hung up, because there is another way.

1 Open the Manager (see point No. 1 of the previous subsection).

2 Expand the Other devices item and call up the properties of an unknown device or a universal controller