How to disable disk protection on windows 10

Hello, dear readers of the blog site. Windows 10 Defender (or as it is also called wnidows defender) consists of several modules that are combined to protect your computer from potential threats. It monitors changes in the system that it considers potentially dangerous and blocks modules that pose a threat to the system. Essentially, a defender is a program that has all sorts of settings in its arsenal. In previous versions of Windows, disabling Defender did not pose any problem, but with the arrival of the new operating system, Microsoft updated the entire security system and now disabling is not so easy. So, let's figure out how to disable Windows 10 Defender.

If you find that your defender is disabled and you want to enable it, the second part of the guide describes how to enable the defender.

Disabling Windows 10 Defender

Method 1: Temporarily disable the defender.

Step 1: As I said earlier, standard way shutdown in the new operating system does not work as in previous versions. This method now only temporarily disables Windows Defender and if you do not enable it, the system will automatically enable it. However, if you just need to turn it off for a while, perform some actions with the computer and turn it on again, it will do. The first thing you need to do is log into the control panel. Click right click mouse on the “Start” button and select “Control Panel” from the drop-down list.

Launching Control Panel

Step 2: In Control Panel, find the Windows Defender menu item and launch it. The Defender management window in Windows 10 will open.

Run windows defender in the control panel

Step 3: Find the gear called “Options” and open it.

Open options to disable

Step 4: After clicking “Options”, the update and security management window will open. On the left in the menu items, select “Windows Defender” if suddenly for some reason this item does not open automatically. In the control window you can disable real-time protection. An annotation from Microsoft immediately warns that the disabling will be temporary and if the protection is disabled for a long time, they will automatically enable it again. Press the switch and turn it to the Off position. If you did not close the main Defender window, you will see how after shutting down the window changed color from green or yellow to red. This means that real-time protection is disabled.

Method 2: Disabling the defender completely.

note that this method does not work on the Windows 10 Home operating system. The service required to disable it is missing.

Step 1: Launch Local Editor group policy" To do this, press the Win+R key combination and in the “Open:” line enter the command to run gpedit.msc and press Enter or Ok.

To launch the editor, press Win+R

Step 2: If you have this editor installed and running, the system will launch a control window. Open tabs sequentially Computer Configuration -> Administrative Templates -> Windows Defender ->. In the right part of the window, find the control option “Turn off real-time protection” and double-click on it with the left mouse button to launch it.

Find it in Windows Features Windows string Defender

Step 3: By default, the parameter is in the “Not Specified” position. In order to disable Windows Defender, you need to switch it to the “Enabled” state. Don't make a mistake at this step and don't accidentally click on the "Disabled" option thinking that disabling means disabling Defender. In this case, you must enable the “Turn off real-time protection” option. This is such a mess :).

Disabling Defender

Enabling the defender after a temporary disabling does not require any additional actions. The system itself will perform all activation steps. If the service was disabled through the “Local Group Policy Editor” by you, you most likely know how to turn it back on, but if it was disabled by someone else or, worse, some malicious program, you need to manually enable Defender.

Step 1: You need to launch the “Local Group Policy Editor” through the “Run” command. To do this, press the Win+R key combination and in the “Open:” line enter the command to run gpedit.msc and OK.

Step 2: Sequentially open on the left side of the window Computer Configuration -> Administrative Templates -> Windows Defender -> Real-time Protection. On the right side of the Local Group Policy Editor window, look in the Status column for the setting Turn off real-time protection» and click on it twice with the left mouse button to launch it.

Step 3: If the defender is turned off, the status will be "Off". All you need to do is set the state to Not Configured.

Disabling Defender

On all computers with operating system Windows system 10 has a primitive antivirus installed by default, called Windows Defender. But for users who prefer third-party antiviruses, it is better to disable the standard defender and permanently remove it using the “Removal Tool” component. malware" Fortunately, completely turning off the defender, as well as turning it back on, is not so difficult and even inexperienced users can do it.

Why disable built-in protection and is it worth doing it?

It is not recommended to disable Windows Defender until a full-fledged antivirus is installed on your computer, since if you leave the system completely unprotected and go online, the chance of catching a virus that will greatly harm your computer is very high. But if you have already acquired one of the possible third-party antiviruses, then it is better to deactivate the defender so that it does not start to conflict with the new antivirus.

How to enable, disable and configure Defender antivirus

There are several ways to prevent the defender from turning on or to turn it on again. Sometimes this may require third-party programs from the Internet. But first, let's look at the options that allow you to configure your antivirus by editing your computer settings.

Setting up and stopping for a while through computer settings

This method can only temporarily disable the program. After each computer restart, the antivirus will open on its own.

Through Windows search, open the Settings service.
Open the Updates and Security section.
On the left side of the window, go to the Windows Defender subsection.
In the “Real-time Defender” block, move the slider to “On.” or Off to enable or disable the protector. It is disabled, but only for 15–20 minutes or until the computer is rebooted for the first time. If these restrictions do not suit you, use one of the following options.

Activate and stop via Group Policy Editing Service

This method is not suitable for home Windows versions 10, since there is simply no such editor in it. It can be installed separately, but it is better to use another method.

Through Windows Search, open the Run utility.
Type and run the gpedit.msc command to go to the Local Group Policy Editor.
Using the folder tree on the left side of the window, expand the Windows Configuration section.
Now navigate to the Administrative Templates folder.
Expand the Windows Components folder.
Open the Endpoint Protection destination folder.
Once in the desired folder, open the “Turn off Endpoint Protection” file.
Select Enabled or Disabled to enable or disable Windows Defender.
Click on the “Apply” and “OK” buttons to save the changes made.
A notification will appear on the screen confirming that the changes have been made and the system has remembered them.

Disable permanently via Registry Editor

This is the most correct and most complete software method, since after it the defender will never be launched again.

Through Windows Search, open the Run utility and use the regedit command to go to the Registry Editor.
Using the folder list that is on the left side of the screen, navigate to the path "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender".
In the destination folder, open or manually create the DisableAntiSpyware. If you want to deactivate the protector, then in the Value data line write the parameter “0”, but if you want to activate it, use the parameter “1”. Then restart your computer.
Open the DisableAntiSpyware file and change the value of the assigned parameter

How to remove the standard antivirus icon from the quick access bar

If you are bothered by the defender icon, which is located in the line quick access, you can turn it off. Using this method, you can stop the service from turning on automatically after each system startup.

By left-clicking on the quick access bar in an empty space, open the task manager.
Expand detailed information about running processes.
In the list of all applications, find the Windows Defender Notification icon, click on it and disable the auto-start process by clicking the corresponding button in the lower right corner of the task manager. Then restart your computer.
Disable process autostart

Turn off notifications

If notifications that Windows protection is not optimal, appears too often, it can get boring. There are two options: turn on Do Not Disturb mode and change system settings.

Blocking by turning on Do Not Disturb mode

This is the simplest and quick way, but its downside is that you will stop receiving notifications not only from the standard antivirus, but also from all other applications. If this doesn’t bother you, then right-click on the “Notifications” icon in the lower right corner of the desktop and select the “Enable Do Not Disturb” option.

Add to System Settings Exceptions

Third party programs to disable

If you cannot disable the defender using the methods described above, you can use third-party free applications.

Using the Win Updates Disabler program, you can control other Windows services if necessary. Win program Updates Disabler can be easily found on the Internet. All you need to do is download it, install it, select the options to disable and apply the changes.

Select what you want to disable

Destroy Windows 10 Spying (get rid of defender completely)

Destroy Windows 10 Spying program is focused on disabling spyware Windows functions 10, but you can also disable the standard antivirus through it.

Problems with the defender working correctly

Windows Defender, like any program, can crash and turn off periodically. Let's look at the most popular mistakes.

Defender stopped starting or error code 577 appears

Find in Windows search control panel and launch it.
Go to the System and Security section.
Open the "Administration" item.
Start the "Services" service.
In the general list, find “Windows Defender Service” and open it.
If the service status is not “Running”, then click on the “Run” button, and in the startup type select “Automatic”.
Click the “Apply” and “OK” buttons successively. Then restart your computer.
Click the "Apply" and "OK" buttons

Defender does not update automatically (manual update)

Because viruses continually evolve, the defender requires constant database updates to always ensure maximum system protection. If you haven't turned off automatic update defender, but it has stopped updating itself, you need to update it manually once for the function to be restored.

Video: how to reinstall native Windows Defender

Where is it located and how to completely get rid of the malware removal tool

Malicious Removal Tool (MRT) - another built-in one Windows antivirus, which quietly removes malicious programs and processes from the system, and then sends a report on the work done to Microsoft. But it may happen that MRT starts to conflict with a third-party antivirus or load CPU. To avoid this, you can simply remove MRT, without which the system will feel completely comfortable.

To get rid of the malware removal tool, you need to go in Explorer to the path “C:\Windows\System32”, where it is written, and delete the MRT folder there.

Delete the MRT folder

Windows Defender and MRT perform the same function: ensuring system security. Make sure these two services are updated and running at all times. But it’s better to disable Windows Defender and install a third-party antivirus: despite all the efforts of the Microsoft organization, antiviruses do their job much better than standard defender.

Windows Defender Antivirus is a free anti-malware solution that Microsoft ships with every Windows installation 10. This security suite is designed to provide a basic level of protection for your device against various types malware, including viruses, ransomware, rootkits, spyware, etc.

Although the antivirus starts automatically, it may be disabled if you install a third-party antivirus product. However, Windows 10 doesn't offer an option to completely disable built-in system protection. The main reason for this is that Microsoft doesn't want Windows devices 10 were used without any protection.

However, sometimes users want to avoid using Windows Defender completely, for example, when using computer terminals without a network connection and configured to block the connection of peripheral devices.

In that Windows manual 10, we will provide step-by-step instructions on how to disable Windows Defender on your computer using Group Policy Editor, the system registry, and Windows Defender Security Center.

Note

All actions specified in the article can only be performed in account with Administrator rights.

Instructions for Windows 10 Pro and Enterprise

Instructions for Windows 10 Home, Pro and Enterprise

How to disable Anti-Tampering Protection (for Windows 10, version 1903, 1909 and higher)

Once you complete these steps and restart your PC, Windows Defender will no longer scan or detect malware.

At any time, you can re-enable Windows Defender Antivirus by following the previous steps and specifying the value “Not configured”.

The Group Policy Editor is not available in Windows 10 Home, but you can do the same thing using the Registry Editor.

Note

Changing the registry incorrectly can cause serious problems. It is recommended to create backup copy Windows registry before performing these steps. From the Registry Editor menu, select File > Export to save a backup.

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender

Right-click the Windows Defender folder, select New > DWORD (32-bit) Value.
Name the parameter DisableAntiSpyware and press Enter.
Double click on the created key and set the value from 1 , then click OK.

Right-click on the “Windows Defender” folder, select New > Partition.
Name the section Real-Time Protection and press Enter.

Right-click the “Real-Time Protection” folder, select New > DWORD Value (32-bit) and create following parameters:
- Name the parameter DisableBehaviorMonitoring 1 , then click OK.
- Name the parameter DisableOnAccessProtection and set the value 1 , then click OK.
- Name the parameter DisableScanOnRealtimeEnable and press Enter. Double click on the created key and set the value 1 , then click OK.
- Name the parameter DisableIOAVProtection and press Enter. Double click on the created key and set the value 1 , then click OK.
- Restart your computer

note

After disabling the built-in Defender antivirus Windows icon component Windows Security (for Windows 10, versions 1909, 1903, and 1809) or Windows Defender Security Center will still appear in the taskbar notification area. If you want to get rid of this icon, then:

Run the utility by clicking on the OOSU10.exe file (administrator rights required)
Go to section Windows Defender and Microsoft SpyNet and turn the switch Disable Windows Defender into an active state. Other options can be disabled if desired.

Note

After installation Windows updates, the system settings can be changed again. We recommend that after installing the updates, run the O&O ShutUp10 program again, the changed parameters will be highlighted and you can change them back automatically.

How to disable Windows Defender Security Center

Please note that after disabling the built-in antivirus Windows Defender the component icon Windows Security(for Windows 10, versions 1909, 1903, and 1809) or Windows Defender Security Center will still appear in the taskbar notification area. If you want to get rid of this icon, then follow these steps:

Open Task Manager and go to the Startup tab.
Find the line Windows Security notification icon(for Windows 10, versions 1909, 1903 and 1809) or Windows Defender notification icon
Right-click on this item and select the option Disable.

If you need to temporarily disable Windows Defender, you can use the following instructions:

Open Windows Security(for Windows 10, versions 1909, 1903 and 1809) or Windows Defender Security Center - just click on the icon in the system tray.
Select the “Virus and Threat Protection” section.
Select the “Virus and other threat protection settings” link.
Set the switch real time protection to position Off.
Restart your computer

After completing these steps, Windows Defender will be disabled. However, this is a temporary solution. The antivirus will be reactivated after the device is rebooted.

Conclusion

While it is true that disabling Windows 10's built-in antivirus may be necessary in some cases, users are not advised to use the device without some kind of protection.

If you are trying to disable Windows Defender because you prefer something else antivirus solution, then you should take into account that the built-in antivirus will be automatically disabled during the installation of an alternative solution.

Windows Defender is Microsoft's own antivirus, which began to be built into all versions of operating systems starting from 8. The standard protection system works in such a way that, if you do not install a third-party antivirus product, it monitors security. But as soon as you download and install another antivirus, the Microsoft tool will turn off automatically and give way to new program. Previously Windows The Defender was criticized, but after the 2016 update it was seriously improved and began to receive more and more positive reviews. Be that as it may, the choice of antivirus is your purely personal matter, so in this article we will take a detailed look at the topic of how to disable Windows 10 Defender permanently or temporarily.

We will talk not only about how to neutralize standard antivirus, but we will also give several ways to do this. Naturally, we will also show you how to disable the program for a while so that you can restore the protection later. This may be needed, for example, when installing a game with a crack. We have noticed a situation where Windows Defender tells us that the application is disabled and does not want to work. This problem we'll figure it out too.

After the August 2016 update, the antivirus icon began to appear in the taskbar. The icon can be removed, but the defender himself will continue to work quietly. To do this we do the following:

Open the task manager (right click on free space taskbar).

The task manager itself will open. We need to go to the “Startup” section and right-click on the “Windows Defender notification icon” entry, and select “Disable” in the menu that appears.

After this, the icon will disappear from the taskbar and will no longer be displayed. You must restart your computer for the changes to take effect.

You can disable any antivirus, like Windows Defender, only temporarily or for the purpose of replacement. There are situations when we want to establish useful program, but for some reason it is perceived as a virus. It is then that you need to force the defender to change his mind. But in such a situation, the correct thing to do would not be to deactivate the antivirus, but to add the program to the “white list”. We will describe how this is done a little below.

Another option that requires disabling Windows Defender is to replace it with another antivirus that you download from the network yourself. Microsoft has provided for the situation of replacing the security software with a third-party one, and when installing another antivirus, the defender is automatically disabled. Sometimes this does not work and then you have to disable the program manually.

Disable correctly

Let's start disabling Windows Defender. Before doing this, please read the previous section carefully. Deactivating a standard antivirus without installing a new one can lead to the loss of personal data or system crash.

Checking antivirus activity

Initially, you need to open the control panel, namely the Security Center section. The easiest way to do this is to search for “tens”. Click on the magnifying glass on the taskbar and enter the word “defender” there, and then select from search results the result we need.

If you see a window where the defender notifies us about complete safety PC, which means it is active, and we can proceed to disable it. If, on the contrary, no action is required, then the antivirus is already disabled.

Disable using the program interface

This is the first, simplest and safe way disabling the standard antivirus. If this option for some reason it doesn’t work, you can move on to more complex and effective solutions, we will describe them below, but for now let’s start disabling Windows 10 Defender through its software interface.

Open the defender itself (we described how to do this in the previous section). You can also run Microsoft's antivirus through the system tray. To do this, simply double-click on the program icon.

In the window that opens, click on the gear icon - these are the program settings that we need.

In the settings window, select the “Virus and threat protection settings” section.

Disable the triggers indicated in the screenshot.

The protection will be deactivated, but after a few minutes it will turn on again. This option is suitable only for those users who need to stop the antivirus for a short time. For others, there are more effective instructions.

Disabling antivirus using Group Policy Editor

You can completely disable Windows 10 Defender using a standard tool - the Local Group Policy Editor. First, let's launch it. This can be done through the Run program. Use the keyboard shortcut Win+R.

Open the utility and enter the command “gpedit.msc” into the text field without quotes and click “OK”.

Open the path indicated in the screenshot in the left pane of the editor and select the “Turn off Windows Defender Antivirus” key on the right side of it.

Double-clicking the left mouse button on the selected item will open a new window in which we can disable the defender. Place the checkbox indicator in the “Disabled” position and click “OK”.

After the system restarts, Windows Defender will be disabled.

The Group Policy Editor does not work in Windows 10 Home - in it the operation will have to be performed through the registry.

Disabling via Registry Editor

Let's consider another method that will allow us to deactivate the standard antivirus service. To do this, we need a registry editor, which is present in all versions of Windows.

Launch the Run utility using the Win+R hotkeys. Next, enter the command “regedit” without quotes and click “OK”.

The Registry Editor will open: we need to follow the path indicated in the screenshot.

Now you need to create new key in the right panel of the editor. To do this, right-click on an empty space and select “New” – “DWORD Value (32 bits).

Enter the name of the new key “DisableAntiSpyware” and press “Enter”.

Double-click to launch the created entry and set the value to “1”. This will disable Windows Defender. If necessary, it can be activated again by setting the key value to “0”.

Attention! If you already had a key named “DisableAntiSpyware”, just set the value to “1” - you don’t need to create anything.

Ready. The system will notify you that Windows Defender is disabled. The notification area icon will disappear only after you restart the computer.

We use third-party software

If for some reason it was not possible to disable your native antivirus, you can resort to another method - third party programs. There is a huge amount of similar software, but it is better to use a utility we have tested called Win Updates Disabler. In one of the articles we talked about, this program was also used there. You can download the application a little lower, but for now let's figure out how to work with it.

Open the program that you have already installed by this time, and check the box next to “Disable Windows Defender” (other items should not be checked).

The program will notify us that changes made applied and for them to take effect, you need to restart the computer. We agree and click “OK”.

You can also use one more functional program Destroy Windows 10 Spying or DWS, which you can also download on this page. The application was created to disable spyware functions in Windows, but it also has the function we need - deactivating the defender. Let's look at how this is done.

Download the program and run it (no installation required). Go to the “Settings” tab, check the box next to “Enable Professional Mode” and “Disable Windows Defender”.

Now you need to apply the changes. Go to the “Home” section and click on the button indicated in the screenshot.

After pressing the key, Windows Defender will turn off and we will be prompted to restart the PC. We do this by first saving all the data and closing the programs.

Attention! When working with DWS, not only the standard antivirus is disabled. Please take a look at the screenshot before applying the changes.

Using PowerShell

There is another way to deactivate the built-in defender. To do this you need to run command line or PowerShell. The choice of environment depends only on you, but in both cases the tool must be called exclusively as an administrator. Let's get started.

Let's use the search in the taskbar again. Click on the magnifying glass icon, enter the phrase “PowerShell” in the search field and right-click on the result, selecting “Run as administrator”.

When the shell opens, paste the command “Set-MpPreference -DisableRealtimeMonitoring $true” into it without the quotes and press Enter. The system will think for a moment and go back to standby mode. This indicates the success of the operation. All that remains is to close the window and reboot the system.

The same can be done through the command line. Don't forget to run it as administrator.

Disable unprotected notification

The protection is disabled, but now another problem has appeared: constant notifications that our computer is no longer protected and is at risk. This is for security purposes, but if you disable your antivirus deliberately, you should know what you are doing.

Let's turn off notifications that only interfere with your work.

Using a standard search engine Windows tool 10 we find and open the security center.

As you can see, the standard antivirus is already disabled.

Click on the gear icon and go to Windows Security Center settings.

Switch the trigger and turn off notifications - it's simple. You can also remove messages from the firewall right away.

Adding an app to Windows 10 Defender whitelist

There is no need to disable your antivirus. You can simply add the program that he “scolds” to the so-called trusted zone or white list. We will consider an example of adding a file or folder to trusted ones using the example of Windows 10 Pro 64 bit Defender. Let's get started.

We open our antivirus by clicking on its icon in the system tray (the program can also be launched through the search, using the method described above). Click on the gear icon and go to the program settings.

Click on “Virus and threat protection settings.”

Scroll the window to the “Add or remove exceptions” item and click on it.

Click on the inscription “Add exception” and in the drop-down menu select the object that interests us.

The following options are available:

file. Allows you to add a specific file in a single quantity, for example, .exe;
folder. Allows you to add an entire directory to exceptions. It may be necessary when there are too many objects and adding them one by one is inconvenient;
file type. Adds a file extension and excludes all objects with this extension from the scanning area;
process. You can enter the name of a process that you don't want the defender to pay attention to.

Let's add to quarantine using a directory as an example. Click on the plus sign and select “Folder”. In the window that opens, left-click on the desired directory and press the “Select folder” button.

The folder has been added to antivirus exclusions. Now it will not scan it and look for viruses. From here you can delete the object and force the program to scan it again.

Let's sum it up

Many users ask the question: how to remove Windows Defender? This cannot be done, but we have learned how to disable it in several ways at once. It is important to understand the danger that our computer is exposed to without an antivirus installed on it. software. You need to deactivate protection only for the purpose of replacing it as quickly as possible or for a short-term installation session of a program that the defender perceives as a virus.