The local network provides various advantages for working with data: copying, transferring information, sharing programs and technology. For example, one device can work with several computers on the network.

You will need

• - computer;
• – configured local network;
• - scanner.

Instruction

1. Download RemoteScan 5 to share the scanner over a network in Windows. You can download it here http://www.remote-scan.com/. Install the server version of the program on the computer to which the scanner is connected. Install the client version of the application on other computers on the network. When you install the latest version, the program will display a message stating that the scanner is not found, do not worry, this is typical. After installing the server version, the program icon will appear in the tray. Click on it with the right mouse button, go to the "Settings" item in order to connect the scanner to the network. Select a scanner and set up ports. The scanner may not immediately decide, it will take from one to 3 minutes.

2. Open your firewall / antivirus and allow access to port 6077, if you have NOD 32 antivirus, go to personal firewall, go to interactive mode in the settings and make a separate rule for the RemoteScan program. Later, install client versions on other computers. The installation of the network scanner in Windows is now complete.

3. Set up a network scanner in Ubuntu OS. Go to the terminal, enter the command #apt-get install and enter the name of the required package - sane-utils, then open the scanner configuration file, the one that can be located in the /etc/sane.d/ folder with the name saned.conf, add to the end file address of the computer to which you want to share the scanner. Edit the #nano /etc/inetd.conf file, add the line sane-port stream tcp nowait saned:saned there and specify the further path /usr/sbin/saned saned.

4. Make a Scanner group: #groupadd scanner. Add users to this group group with the following command: # #usermod -aG scanner "User name"; usermod -aG scanner saned. Edit the 40-libsane.rules file located in the nano /lib/udev/rules.d/ folder and find your scanner there. Bring the line with the name of the scanner approximately to this form: # "Name of the scanner"; ATTRS(idVendor)==”03f0″, ATTRS(idProduct)==”4305″, ENV(libsane_matched)=”yes”, MODE=”664″, “Group Name”=”scanner”.

5. Set up the client computer: install the sane-utils package with support for the standard package installer apt-get install, edit the net.conf file located in the nano /etc/sane.d/ folder, add the address of the scanner computer to the end of this file. The network connection of the scanner is completed.

In contrast to Windows, which is easy to install and configure, Linux has become a symbol of the difficulty and complexity of installation, which can scare away anyone who does not consider himself a command-line virtuoso and a high-class programmer who can independently write a missing driver for an unknown device.

However, installing and configuring ubuntu - especially the Linux distribution famous among beginners - is no more difficult than any other operating system. This distribution kit is ready to launch immediately after installation and includes everything you need to work: a customer for communication via the ICQ protocol, an email customer, a photo tool, an audio and video player, and an OpenOffice office suite. In addition, a mechanism for tracking software changes is implemented here, freeing the user from the need to monitor the release of new versions. Here is a schematic instruction for the installation process: 1. Download the distribution from http://ubuntu.ru/get, burn the disk image to CD, install it into the drive and boot. To do this, you may need to set the boot priority from the CD drive in bios.2. In the installed installer, select the Russian language. Navigation through the list of languages ​​is allowed with the support of arrows on the keyboard.3. In the menu that appears, select the item "Install ubuntu"4. You will again need to prefer the language for communication during the installation process, specify the time zone.5. Select a keyboard layout and check if it works correctly by typing a few words.6. A particularly important stage of installation is the definition of disk partitions for the operating system. If you want to leave Windows and set up Ubuntu as an alternative operating system, you need to be very careful not to lose valuable data and keep Windows up and running. As usual, for a root partition containing system files, 5 GB is enough, for a swap partition, usually a volume equal to the computer's RAM, or one and a half times greater than it, is usually sufficient. The home directory home, containing user data, should ideally be located on a different physical disk and have a capacity of 8-10 GB.7. Specify the username and password, as well as the computer name, click "Install". After the reboot, the system is ready to work.

Related videos

A scanner is a device necessary for converting a wide variety of documents into electronic form, ranging from texts and tables to photographs. Scanner models are constantly being improved, their functional probabilities are growing, and prices are falling, so that the scanner more and more often finds a place for itself on the table next to the home computer.

To take full advantage of the possibilities of modern special scanning technologies, you need to configure the scanner. Fortunately, with the origins of modern USB models and operating systems, setup is often done mechanically by simply plugging the scanner into a computer. However, in other cases, the user may also need primitive actions to configure the scanner. Their approximate sequence might be as follows: 1. First, connect your device to your computer. The operating system will try to recognize it and mechanically install the necessary drivers and configure the scanner.2. Open the Scanners and Cameras item in the Control Panel. It lists all imaging devices connected to the computer, as well as a shortcut to launch the New Device Connection Wizard. If the connected scanner is already in this folder, then the connection was made successfully in mechanical mode. If it is missing, run the scanner installation wizard.3. Manually select the scanner manufacturer as well as the specific model name and click Next. If your scanner model is not in the list, then install the driver disk that came with the device into the drive and click the "Install from disk" button. You will need to specify the path to the device driver on disk. As usual, the required driver is located in a folder whose name contains the name of your scanner model and the name of the operating system in which you work. If there is no driver disk, try downloading them from the scanner manufacturer's website and specifying the path to the folder where you will save them.4. At the next step, the wizard will prompt you to specify the port to which the scanner is connected. If you are in doubt about which port to specify, select Mechanical Port Detection.5. It remains to set the name of the new device in the system, and the installation is complete. Now it can be used from any program that supports working with images.

The local network has a number of advantages for use within the same organization: universal access to files and applications, as well as the sharing of equipment: printers, scanners.

You will need

• - the local network;
• - scanner;
• - the Internet.

Instruction

1. Use the RemoteScan 5 application to share the scanner over the network. Download this program from http://www.cwer.ru/node/6585/. Then install it on computers. Accordingly, to the computer to which the scanner is connected, the server version, to the other PCs to which the scanner needs to be connected via the network, the client version.

2. Please note that when installing the client version of the program, a message about the absence of a scanner may appear, do not pay attention to it. After the conclusion of the installation of the server part of the application, right-click on the program's tray icon. To access the settings.

3. Select a scanner, configure ports to access it. Please note that it may take from one to 3 minutes to determine the device. If this does not happen, then your scanner model is not supported by the application.

4. Wait until the strikethrough icon disappears from the icon. Open anti-virus/firewall. Allow access to the scanner port, by default it is 6077. If you have NOD32 antivirus, then go to your personal firewall, open settings, select interactive mode, make a separate rule for the RemoteScan program. Install client applications on the desired computers, add special software there, and perform network scanning.

5. Use another program to share the scanner over the network if your scanner was not detected by the previous application. To do this, download the Blindscanner program. Follow the link http://www.masterslabs.com/ru/blindscanner/download.html, select the required version, download and install the server and client versions of the programs on your computers, respectively. The setup is done in a similar way.

It is unlikely that there will be at least one user of computer technology who would not be nervous about the tangle of wires connecting all kinds of peripheral devices to a computer. Cables are extremely inconvenient when working with a laptop; they negate all the advantages of computer mobility. It is not without reason that the connection of devices without wires - all kinds of wireless keyboards, mice, printers and more - has become such a swift and strong celebrity.

You can also get rid of one more wire - a network one, by organizing a wireless wi-fi network in your home or office. It will provide high-speed Internet access anywhere in the room without wires, making both work and leisure even more convenient. In addition, such a network will be available not only for computers, but also for other equipment that supports wi fi, say, phones and printers. In order to set up wi fi, you will need an access point or, if the Internet is supplied using special ADSL technology, an ADSL modem router.1 . Connect and set up your wireless router. This process is quite primitive and available to any user. Follow the instructions in the documentation for your model. We only note that if this is permissible, then it is better to make the distribution of IP addresses mechanical. This will simplify the procedure for entering the network for new technology.2. Set up the entire computer for wireless networking. Many laptops have a built-in wi-fi adapter, while a desktop computer may require a wireless network card, which will need to be purchased separately. Setting up a wireless network is slightly different from setting up an ordinary network. The only thing that needs to be done additionally is to enter a special secret network code generated by the router. The code will allow you not to worry that third-party users will be able to connect to your wireless network.3. To connect to a wireless network of a pocket computer, it is easier for everyone to use the built-in iPAQ Wireless utility or a similar one, depending on the model of a pocket computer or phone. Here you will also need to specify the secret network key. Later, after you managed to set up wi fi, it becomes possible not only to use the Internet from any of the devices on the wireless network, but also to use the local network: provide public access to folders, share a printer and scanner etc.

Related videos

You probably know firsthand the situation when there are two or more PCs at home. The exchange of information between them, the use of one printer or scanner, as well as other peripheral devices, requires the existence of a network. But tea PC users need not only access to local sources, but also to the vastness of the global network. In view of this, you should figure out how to configure exit v the Internet from the general modem.

You will need

• Personal computers, modem.

Instruction

1. Open the control panel of the whole PC, find the icon called "System" and click on it. In the "System" properties, go to the "Computer Name" tab, select the "Change" option and write down your name for the entire personal computer, as well as one universal group.

2. Reboot both electronic devices for the changes to take effect.

3. After restarting the PC, open the control panel, click on the "Network Connections" item and select the "Local Area Network" properties.

4. Perform the "Protocol the Internet a (TCP/IP)". To do this, you need to connect the modem used to the hub, manually enter the IP address, the mask of the subnet made, as well as the "Rod Gateway".

Related videos

Note!
When assigning an IP address to all of the computers on the local network, carefully check them to avoid duplication, from the fact that the coincidence of the IP address of electronic devices can become a reason for their contention and, as a result, the impossibility of working on the same network.

Useful advice
On the “Rod Gateway”, that is, the modem, write down the 1st address (for example, 212.120.0.1), and select the IP address for PCs included in the local network from the range 212.120.0.2 - 212.120.0.255. The subnet mask for all devices will be identical.

Several PCs in an apartment or office does not mean at all that you need to connect to all of them scanner or a separate printer. To make scanning and printing devices available to everyone, connect office equipment via networks .

You will need

• – Several computers;
• - scanner;
• - driver;
• - the local network.

Instruction

1. Equip computers with a network scanner ohm. The probability of using office equipment on equal terms will be received by all participants of the local networks. Set up and install the equipment positively. To avoid complications in the operation of the network scanner but consider some of its features and subtleties.

2. Please note that the network is connected scanner at ease to the switch through the hub. If there are enough USB ports, then a hub is not indispensable. The main difference between network scanner ov from ordinary ones - lack of binding to one PC.

3. Complete the setup steps networks in the following sequence:- Install the drivers for scanner a, from a disk from the manufacturer to all computers connected to networks;- execute driver setup;- assign network scanner at your IP address; - connect the equipment to the switch; - enter the IP value into the again made TCP port. The network equipment will be connected to the server. The scanner will be able to send finished images to the specified computer or email address.

4. Consider the probability of customizing an ordinary scanner and with WSD service support. To do this, connect the equipment to networks, make sure that scanner switched on. Click "Start" and go to the "Network" tab. Detect Icon scanner and, by clicking on it with the mouse (right button), select the item "Install" (Install). In the User Account Control dialog box, click Continue. Click on the line "Your device is ready to work", check the settings and click on the item "Close" (Close).

5. Now click "Start" again, find the "Control Panel" option, go to "Devices and Printers". Make sure the network icon is present. scanner a. Now perform a scan using the WSD service. Network name scanner but will be displayed on all computers participating in the connection via local networks .

Note!
The WSD service is available on Windows Vista systems.

Useful advice
The network scanner icon will be displayed with the name of the hardware being used.

At a certain stage in the formation of a retail trade entity, the manual form of accounting ceases to meet the needs of this trade enterprise. At the same time, the lack of an automated accounting system often leads to financial theft caused by employee abuse. Consequently, an automated accounting system "1C: retail" is being introduced at a trading enterprise, which must be positively configured.

You will need

• - Personal Computer;
• - "1C: retail".

Instruction

1. Carry out preparatory work. To do this, set up the "Store" (enter the name of the store and set up the account). "Warehouses" can be represented not by a solid warehouse, but by a whole structure (utility rooms, trading floors and other objects).

2. The “Products” setting involves entering the most detailed information about the products sold: contractor, expiration date, composition, and more. Set up the "Prices" section. The pricing mechanism in this automated system is elastic and primitive: if a price metamorphosis is planned, a date can be set in 1C: Retail from which new prices will start to be made.

3. When setting up "Discounts", consider the fact that there are three types of discounts: when buying a product for a pre-specified amount, when buying a certain number of goods, using a discount card.

4. Perform the "Permissions" setting: this will allow any user who will be granted access to this complex program to determine only the actions corresponding to his position. This will eliminate fraud on the part of the employees of this trading enterprise.

5. In order to increase the efficiency of the retail trade enterprise, perform the correct setting of the equipment used. The choice of commercial equipment requires a responsible approach. Among the most common equipment, a fiscal registrar, a barcode scanner, and label printers are distinguished.

6. The final stage of setup is operational management. An inseparable stage of effective management is reporting and its review.

Note!
If important tasks arise while working with 1C: Retail, immediately contact the system manager for support.

Useful advice
The 1C: Retail program is designed to minimize routine work. Due to the fact that it owns most of the functions, this software is easy to customize "for yourself."

After the scanner is turned on, the driver for this device must be installed to enable data transfer between the computer and the scanner. Start by connecting the scanner to your computer's USB. (See the instructions for using the scanner and find out how to connect it to your computer.)

Changing Scanner Settings

After installing the scanner, you may want to review your settings or change the default settings. To do this, run the command Start>Control Panel. In the search field in the control panel window, enter the word scanner and press the key .

1. In the Control Panel window, click on the link that appears View Scanners and Cameras.
2. In the window Scanners and cameras a list of installed scanners will be displayed. Click first on any scanner in the area Scanners and cameras and then on the button Scan profiles.
3. In the dialog box Scan profiles select the scanner and click the button Change. In the dialog box Change default profile, view the settings, which may include (depending on your scanner model) color management to properly reproduce scanned colors and set resolution. (The higher the resolution, the clearer and cleaner the electronic document will be, but it may take longer to scan.)
4. Click the button Save profile, and after returning to the properties dialog box, double-click the button close to close windows Scan profiles and Scanners and cameras.

Once you are ready to turn on the scanner, place the document you want to scan into it. Depending on the scanner model, this document can be placed on the scanner and covered with a lid or passed through a tray. See the instructions for the scanner for how to start the scanning procedure (for example, click on the button Scan or Start). The computer will automatically detect the beginning of the scanning process, display a dialog box showing the progress of the scan, and prompt you to view and save the scanned item.

It often happens that in addition to a remote printer, you also need a remote scanner to work. And if setting up a printer on a local network is not difficult, then everything is much more complicated with a scanner. The fact is that Windows does not provide tools for sharing the scanner. This is done at the level of its drivers. Therefore, to open access through the local network, you need to use third-party programs.

The Blind Scanner utility is great for this, which works exclusively with scanners, making them visible to all computers on the network. The program is installed on each computer in client mode, and on the computer to which the scanner is connected - in server mode.

After installation, the program will automatically start the server service and will work minimized to tray. By opening the program window, you can see the operating mode of the service, its status (active or not), as well as scanners connected to the computer.

The utility is active and available over the network. Now it needs to be installed on all computers from which the scanner will be accessed, in client mode.

After the installation is completed, the "Scannito lite" program will start, in which you need to select BlindScanner Pro.

A scanning window will open, in which you need to search for the program server. To do this, you need to open the settings (as in the screenshot) and enter the local address of the computer to which the scanner is connected.

The connection will then be attempted. If everything is entered correctly, then in a couple of seconds you can see the scanner itself in the field.

Select the scanner model in the drop-down menu, after which you need to set the settings: resolution, color mode, paper size, and contrast and brightness settings.

Now you can start scanning. Upon completion, the result will be displayed in the preview window, after which you can save it to any directory. As with a printer, only one computer can access the scanner, the second must wait for the first to finish.

This is the simplest yet most reliable way to share a scanner. It can be used both in the office and in the home network when it is not possible to move the scanner from place to place. Also, any program that supports scanning, for example, ABBYY FineReader, can act as a client.

The scanner allows you to solve a number of problems with the digitization of information, quickly and conveniently turning a physical medium into an electronic document. After purchasing this device, a dilemma arises, how to connect the scanner to a computer so that it works without failures. In this article, we will also consider the option of creating a home network that will allow you to use one scanner for several devices.

Connection order

You can configure the device operation parameters in the "Hardware" menu.

If you know how to connect a keyboard or how to connect a wireless mouse, then you must have already visited this section in the Control Panel and are familiar with its capabilities.

Installing a network scanner

If there are several computers in the room, and there is only one scanner, then you will have to create a network to work with it. In this case, the scanning equipment will be connected directly to the network switch.

The first step is to install the drivers and assign an IP address.

To complete this step, the scanner must first be connected to one computer. After carrying out the above procedures, the equipment can be turned off.

After the preparatory work, connect the device to the network switch. Then configure each computer on the network by creating a connection. For this:

Similarly, you can connect a printer or other office equipment. Do not forget to install drivers for all devices in the workgroup. Otherwise, the equipment may not work correctly or even refuse to perform its functions.

>

Hello to all! Today I ran into this problem how to make a network scanner in windows? The printer is then easily added, because. Windows has a built-in print server, but no scanning.

How to set up a scanner over a local network?

Having searched a little, I found a program that makes a scan server and, accordingly, can share a usb printer over the network!

Now see how it works:

1. Install this program on the computer to which the scanner is connected. Set up as a server.

2. Now on a computer that does not have a scanner, install the program in Client mode.

3. To scan a document, select RemoteScan as the device.

1. Install as a server

I won’t explain to you how to install, everything is simple further, further, but most importantly, install as is and during installation, check the server box.

At startup, select the scanner through which the scan will be performed. We select the scanner so that the program can share the scanner over the network.

Everything. The server is minimized to tray and will start when the computer starts. You don't need to turn it off. If necessary, you can change the scanner in the tray if you have several of them.

2. Install the scanner as a client

Now install the scanner on the computer where you will scan.

The installation is similar, only during installation you need to select the Client checkbox.

After installation, if the firewall asks, again select which networks you will use it on.

Everything. Now how to scan.

3. How to scan over network via USB

Now choose . I took the second one, which can scan multiple pdf pages into one file.

Select RemoveScan as a scanner

And we scan, as usual) This is how you can scan over the network via usb scanner!

Many people may need to connect a printer to a virtual machine, I'm attaching this video)

PS: If someone has conflicts with this program on computers, then try the BlindScanner program - this is an analogue.