How to remove an extra object from a photo in Photoshop? How to remove people or unwanted objects from a photo How to remove excess in Photoshop online

How to remove an extra object from a photo in Photoshop?

Today we’ll talk about such an action in Photoshop as removing unnecessary objects or elements of an object. The need for such an operation, although it does not arise so often, but nevertheless, this operation is very necessary, because in this way you can save a good photo.

The traditional way to remove objects is with the stamp tool. We will also tell about it. And in the beginning, I would like to talk about one fresh trick - this is deletion using the Content-Aware Fill tool. We will show this first. Then we will get acquainted with the following necessary techniques:

Content Aware Fill is a fairly quick removal of objects that are fairly simple - better to say straightforward. For example, let's take a photo of a street from which a pole needs to be removed.

Upload a photo, duplicate the layer for work. Next, select the Lasso tool, namely the rectangular one. We circle the pillar with it, leaving a little background around the edges.

In the window that opens, in the top line, select "Content-Aware". Often, this function is already set by default. Then you don't have to choose.

Leave everything else unchanged and click OK. We get the result - the column has disappeared. The wires remain. A miracle happened :)

This is such a simple, quick operation. But, let's go further and see how you can remove unnecessary elements on the face.
Removing an extra object from the face in the photo
Sometimes, when making portraits, it suddenly turns out that unnecessary objects are very clearly visible on the face. Most often it is acne. Depending on the number of acne, their location and shape, you can act in different ways. For example, we have such a portrait.

We upload a photo, enlarge it to the desired and convenient size and proceed to deletion. The first option that can be used for small objects is the brush. But first, select the pipette from the toolbar and click it on a healthy area of skin. At the same time, note that the main color has changed to the selected one.

Now you can start painting. Select the “Brush” tool, set the size close to the size of the object and click on the pimple until it is painted over.

As you can see the pimple is gone. Remove the rest in the same way. If somewhere a sharp border is formed between the place of the distant object and the original skin, you can use the Blur tool and correct it.

Also, with this tool, you can try and cover up the object, provided that it does not differ sharply from the background. Here is the result of using these two tools. Pretty effective result, now you know how to save a good photo.

As you can see, large objects have been removed. The same can be done using the Content Aware Fill feature described above. With the help of "Lasso" select the object, go to edit-fill. In the window that appears, select "Content Aware" and click OK. The result is the same.
How to remove an extra object from a face in Photoshop without losing the background?
In this example, we will consider not exactly removing from the face, but from the portrait. We will remove the bow on the head. But, for complex objects on the face, you can use the same method. So, upload a photo of a girl with a bow and duplicate the layer.

We need to remove the bow. Let's use the "Content-Aware Fill" method. Select the bow with the lasso tool.

Now go to the edit menu - fill. By the way, you can do it easier. We click on the selected object with the right mouse button and select the same item in the menu that opens.

In the window that opens, select based on the content and click "OK". However, the bow was cut out not quite correctly.

This problem is solved with the help of another tool - "Stamp". We find it on the toolbar. The icon looks like a stamp.

Next, press the "Alt" key and, holding it, select the area with the stamp tool, which will replace the unsuccessfully deleted area. Naturally, we choose where the hair is well defined. Here is an example of the result of the first section, where the bow was removed not quite correctly.

In the same way, we delete all other incorrect areas. At the same time, do not forget to periodically change the clone location by pressing the "Alt" button. This is due to the fact that when moving over the shaded area, the area from which the copy example is taken also moves and may fall on the color that you do not need. Here is the finished result of removing the bow from the girl's head.

As you can see, there is no trace left of the bow. At the same time, the background is preserved, the photo looks natural.
Removing excess from the photo using the tool "Stamp"
The stamp is also a very unique tool, just like the fill discussed earlier. Let's see some more features of this tool. Let's say you need to remove an item from this picture:

Load into the program, make a duplicate of the layer. Remove the haystack. Note that the haystack lies in three different parts of the drawing. On the field and against the background of the forest and the sky. Accordingly, we will clean up according to these parts.

We start with the sky background. Select the stamp, hold down the "alt" button and click on part of the sky background.

Since the haystack does not lie against the background of clouds. And more on the dark part, then select it. Let's release the "alt" button and move the round cursor over the top of the haystack. Periodically, if necessary, again select a part of the sky for cloning. As a result, we get:

We clean up to the edge of the forest. Now let's move on to the forest part of the haystack. Similarly, we click with the “Alt” button pressed on the forest and clean further. Result:

It remains to remove part of the haystack located on the field. It's a little easier here. There are many textures of the field, choose any place and clean it. As a result, we get the finished image without a stack.

As you can see, everything is very simple. Good luck with this wonderful program.

21.01.2017 27.01.2018

Hello dear visitors of the Pixelbox website!

Many of us have had to deal with a situation where a photograph, thought out in terms of composition and beautiful in terms of plot, is spoiled by an outsider, a bird, or the like unexpectedly wedged into the frame. What to do - throw away / delete the damaged photo? Of course not! In Photoshop, there are several tools that help you easily and simply remove an extra object in a photo.

1 way

How to remove an extra item using the Content-Aware Fill function

There is a photo from the sea, but everything is spoiled by the guy in the background, who, moreover, is standing with his back. Opening a photo in Photoshop (ctrl + O).

The easiest and easiest way to remove a guy from a photo (no crime, just photoshop magic!) is to use the function Content-Aware Fill. This feature appeared in the version of Adobe Photoshop CS5 and peacefully migrated to the following versions of the program.

In order to take advantage Content-aware fill, you must first select the item you want to delete. You can do this in any way convenient for you, I used the tool Lasso (Lasso), tool call hotkey - L.

We circle the guy with the mouse “with a margin”, not back to back:

Go to the menu Editing-Fill (Edit-Fill):

In the window that appears, select WITHcontent-aware fill:

Naturally, we press OK and this is what we get:

To remove the selection that prevents us from admiring the beauties of the water, press ctrl + D:

Magic! Easy and fast! For those who are not looking for easy ways, I will tell you one more way to eliminate any unnecessary object from a photo.

2 way

How to remove an extra item using the tool Stamp (Clone Stamp Tool)

Tool Stamp (clone stamp Tool) allows you to mask unnecessary objects in the photo, replacing the area with a defect with the desired area that you choose. Tool call hotkey - S.

Top settings panel tool, you can choose on which layer the cloning will occur - on the active, on the active and below, or on all layers. If you choose the first option, on the active layer remember - all changes will occur on the main layer. I do not recommend using such a destructive photo editing method, it is better to create a layer on top of the main one and select "on active and below"- in this case, you can always correct the layer with cloning.

Create a new layer (click on the icon for creating a new layer in layers palette):

Make this layer active:

And holding down the key alt, take the site next to the guy, release the key alt transfer this plot to the guy, and to “attach” the plot in the right place, click left mouse button.

So gradually, taking the areas that are near the object to be removed, we paint over the guy:

I hope the lesson was useful to you and will help you create high-quality and beautiful photos!

Spontaneous images often contain extra objects, defects and other areas that, in our opinion, should not be. At such moments, the question arises: how to remove excess from the photo and do it efficiently and quickly? In this lesson, we will figure out how to quickly and efficiently clean up an image from interfering details.

Removing Details from a Photo in Photoshop

Today we will use two tools. This "Content Aware Fill" and "Stamp". An auxiliary tool for selection will be "Feather".

Open the photo in Photoshop and create a copy of it with a keyboard shortcut CTRL+J.

A small badge on the chest of the character will act as an extra element.
For convenience, zoom in on the image with a keyboard shortcut. CTRL + plus.
Choosing a tool "Feather" and stroke the icon along with the shadows.
Next, right-click inside the contour and select the item "Create Selection". We expose the shading 0 pixels.
After the selection is created, press SHIFT+F5 and select from the dropdown list "Content Aware".

Click OK, deselect with keys CTRL+D and look at the result.
As you can see, we have lost part of the buttonhole, and the texture inside the selection has also blurred a bit. It's time "Stamp".

The tool works as follows: when the key is pressed ALT a texture sample is taken, and then this sample is placed by clicking on the desired location. Let's try. Let's restore the texture first. For normal operation of the tool, it is better to reduce the scale to 100%.
Now let's restore the buttonhole. Here we will have to cheat a little, since we do not have the necessary fragment for the sample. Create a new layer, zoom in and, being on the created layer, take a sample with a stamp so that the area with the finishing stitches of the buttonhole gets into it. Then click anywhere. The pattern will be printed on a new layer.
Next, press the keyboard shortcut CTRL+T, rotate and move the sample to the desired location. When finished, press ENTER.

Result of the tools:

Today, using one simple example, we learned how to remove unnecessary items from a photo and restore damaged elements.

Every day, technology is increasingly integrated into the life of modern people, becoming its integral part. Today, if you do not know how to use the Internet, it will be extremely difficult for you to survive in the world. You have to be able to do literally everything. The Photoshop graphics editor is extremely difficult to master, but there is a way out of this situation and it is the Movavi Photo Editor program, which allows you to perform many actions in a simple and convenient interface. can be found in the text below.

Most users don't need all the features and functionality that comes with Photoshop and its more sophisticated counterparts. In the case of Movavi Photo Editor, all the functionality can be learned in just one hour. For example, with its help, you can remove unnecessary objects from the photo, or remove something else that is unnecessary. This can be unwanted people or some object in the background. Using a special tool, you can remove not only a fragment from a photo, but also any other element, including the date, time, number, inscription and logo.

Moreover, the functionality of this program allows you to remove the background in a photo in just a couple of clicks, which can be extremely useful, for example, when working on a postcard. This means that with this software you can replace one background with another. Most importantly, the Movavi Photo Editor application allows you to process any image, including those taken with a smartphone or a professional camera. By selecting a special tool, the user himself selects the piece that needs to be removed.

How to Cut People, Objects, or a Date from a Photo

Quite often there is a need to remove objects from a photograph. It can be someone's watermark, or something or someone else. For example, it often happens that after taking a photo while traveling, some unwanted person suddenly appeared in the background and spoiled the whole frame. The Movavi Photo Editor program will show and tell you how to cut a person out of a photo, as if he had never been there. This photo editor contains handy and clear tips that will teach even the most inexperienced user how to do it.

This application for computers contains not only a function that allows you to delete objects, but also many other additional features. Users can apply filters, add text, smooth out skin imperfections, and do many other things. For all this, only the original image is needed, and the program can do the rest by itself, offering the appropriate tool.

You can download the Movavi Photo Editor program for free from the official website, but this will be a trial version. You will have to pay 1290 rubles for the full one. Versions are available for various operating systems, including the entire Windows line and macOS (for Mac computers). You can try out the functionality of the application for free, and if you like it, you can buy the full version to create without restrictions.

Join us at

The extension value depends on the size of the image:

Open the fill dialog via Editing --> Fill (Edit --> Fill) or press Shift + F5. In the window, select the "Content-Aware" item and click OK:

Photoshop fills the selection with surrounding pixels and blends them. The filling of the selection is random, so if the result does not satisfy you, repeat the procedure again. Press Ctrl+D to deselect. Here's what I got, for clarity, I did not remove the selection:

Removing Photo Objects with the Content-Aware Patch Tool

If the object you want to remove isn't surrounded by enough background pixels, you can tell Photoshop to use a completely different area in the photo to replace it.

Let's walk through this process step by step.

STEP ONE: Open the image and press Shift+Ctrl+N to create a new layer.

STEP TWO: Grab the Patch Tool. At the top, in the options bar, set the mode to "Content-Aware" and the sampling mode to "Sample from all layers" (Sample All Layers). Do not touch the "Adaptation" parameter yet:

STEP THREE: Create a selection with the mouse cursor around the object to be deleted (in my example, a man in a green shirt). If necessary, expand the selection to include more background pixels.

Note. To create a selection, you can use any of the selection tools, such as "Quick Selection", and then switch to "Patch".

We have the sample selection mode from all layers turned on, which means that Photoshop sees the background layer through the empty one.

Create selection:

STEP FOUR: Click the left mouse button inside the selected area and drag the cursor to the area you want to use for the basis of the replacement pixels. Photoshop will show you a preview of what the fix will look like. Try to match any horizontal and/or vertical lines as best you can, when you're done, release the left mouse button:

STEP FIVE: Now about the option "Adaptation" located in the options panel. It allows you to set the amount of blending that Photoshop will perform when inserting new pixels into the target area. There are only five values, ranging from "Very Strict" (Very Strict) to "Very Loose" (Very Loose), which means very little to very much mixing, respectively. These parameters are best chosen experimentally. If you don't like the result, undo it with Ctrl+Alt+Z and try again. In Photoshop CC 2014, the "Customizations" drop-down menu (gear icon) already has two options - field structure and color, and these are changed by entering numbers from 1 to 5. 1 corresponds to "very strict", 5 - "Very loose". From this it follows that in CC 2014 you can control the mixing of not only the structure, but also the color. In the figure, I have shown this option on different versions of Photoshop: