Reading time: 2 minutes

Autofocus helps the iPhone's camera take good, non-blurry shots. Accordingly, if the camera does not focus on the iPhone, the quality of photos is drastically reduced. Therefore, when such a problem arises, the owners of Apple smartphones begin to look for ways to eliminate it as soon as possible.

Possible reasons why autofocus does not work

If autofocus does not work on an iPhone 6, iPhone 5, or another model of Apple's smartphone, a number of factors can be the reason for this:

• Accidental locking of autofocus by the user.
• Mechanical damage or moisture ingress. After being hit or dropped, in addition to the loss of autofocus, other problems may appear: the camera does not turn on, a message appears that the removable device is in sleep mode.
• Failure of the controller that controls the camera.
• A bumper or cover that interferes with normal camera operation.
• Software glitch.

Some reasons can be eliminated on your own, but if we are talking about damage to the camera, moisture ingress or failure of the controller, it is recommended to immediately contact the service center.

Self-help troubleshooting

To lock the function, just hold your finger on the screen for a few seconds while the camera is on. Touch the screen elsewhere to unlock autofocus. Even when auto focusing on a subject is turned on, it does not always work properly. For example, on iPhone 4, sometimes you have to press on the screen area to focus, otherwise the camera does not understand which object to photograph clearer.

There is another way to make autofocus work. Take your phone, turn on the camera and shake the device a little by moving it up and down. If that doesn't work, try restarting your device. The problem may be caused by a software glitch that will stop acting on the camera after the system is restarted. As a last resort, you can do a factory reset or restore your iPhone after backing up your data.

A large number of running applications can also affect autofocus performance. Due to insufficient memory, the phone cannot cope with several heavy applications running at the same time. Yes, the iPhone has great specs and can handle a lot of workload, but it's not worth checking out just in case.

Sometimes the camera stops functioning properly due to dirt and dust getting on the lens. A gentle cleaning will be enough to get the autofocus working again. Also pay attention to the cover or bumper. Try to take it off and use the camera. If autofocus works without a protective accessory, replace the case / bumper - it just doesn't fit your phone.

Hardware faults

If you cannot fix the problem yourself, contact the service center for a thorough diagnosis. The camera module itself, the loop, the controller may be damaged - only specialists will be able to pinpoint the cause.

A professional answer to a painful question.

At some point, iPhones, due to their compactness and mobility, replaced cameras for many. With each new generation of iPhone, the quality of shooting on Apple smartphones is constantly growing, approaching to DSLR cameras. However, it often happens that iPhone shots suddenly become insufficiently clear or blurry. Even setting focus manually, it is impossible to achieve the same clarity. What to do?

Why the camera on the iPhone becomes cloudy and stops focusing and what to do about it

1. The first and simplest reason is a dirty camera lens. In this case, everything is elementary - clean the camera lens. Dirty or dirty camera glass can interfere with focusing! We do this with a special lens cloth.

2. True, in most cases, the rags remain powerless. Dust and dirt can enter the iPhone's body and build up between the lens and the protective glass of the camera. In this case, you cannot do without parsing the phone. Note that most often the problem manifests itself on the iPhone 5, iPhone 5s and iPhone SE - the most popular iPhone models in Russia. Conclusion - we turn to specialists, or we disassemble the iPhone with our own hands and carry out cleaning.

3. Not less rarely, scratches on the camera glass interfere with focusing. Scratches are also very scattering and blurring the focus and the picture as a whole. Here it is necessary to replace the lens glass at the service center! The problem often manifests itself on the iPhone 6/6 Plus and newer, as in these models the camera protrudes from the body, often in contact with various, including numbers and sharp objects.

4. The saddest reason for which the pictures on the iPhone are blurry is the dust getting on the lens matrix or the breakdown of the zoom of the camera itself. There is only one solution to these problems - replacing the camera in the service!

iPhone - a smartphone from Apple, which has established itself as a very reliable technique, also has some problems.

Most of all dissatisfaction in relation to the work of this device is caused by the camera. In many cases, they are faced with the fact that Autofocus does not work in iPhone 5... But without autofocus, it's pretty hard to take a high-quality photo.

There are many reasons why this feature stops working. You can eliminate some of their consequences yourself. Eliminating others will require the work of a wizard. You can find the most common of these causes and ways to eliminate the consequences here:

Autofocus does not work IPhone? There is a solution.

The simplest reason is that the user randomly locked autofocus himself. The label “AE / AF lock”, which was present earlier, has been removed from the new version of the iOS operating system. Now it is enough to hold your finger on the screen for a few seconds while the camera is working to enable autofocus lock. The exposure square will start blinking. To remove the lock, just click on the screen in another place.

Sometimes a crash in the system or program becomes the reason that autofocus does not work in the iPhone. In this case, the only solution to the problem is to reboot his system.

A fairly common cause of focusing problems is the so-called "bumpers", covers that are worn over the body of the iPhone. They often greatly interfere with the correct movement of the lenses. It is required to remove this cover and check how autofocus works, already without it. If it starts to work, you need to replace the cover with one that fits better specifically for your device.

If the camera does not focus on the device even without a cover, the back cover is most likely to blame. It can also interfere with lens movement. You need to shake the smartphone by removing it, while checking, how autofocus works on an iPhone.

But when the device falls, more serious problems arise. The slightest impact can cause autofocus to fail. Moisture can cause similar problems. In these cases, the problem is often not in the focusing system itself, but in the damage to the camera's power or its mount. You will most likely need to change your iPhone's camera. It often happens that the camera itself is in working order, but the controller that controls it is faulty (the same reasons can lead to this). If so, the controller must be replaced.

In no case try to fix any more or less serious problem on your own. Apple equipment is quite difficult to repair, so your actions can cause even more damage. It is much more correct to seek help from specialized service centers, where specially trained masters will deal with your device. And never delay repairs if your iPhone's camera or other component stops working.

Smartphone camera focus problem? There is a solution!

iPhone is one of the most branded and demanded smartphones around the world. The combination of quality and style helped to achieve such popularity. But the owners of this gadget periodically encounter problems during operation. The iPhone does not focus - one of them.

Looking for a reason

Before moving on to the breakdown, you should find out what caused it. Common reasons include:

• damage to the camera when dropped;
• water or moisture getting into the phone case;
• system failure;
• lack of RAM for the operation of the application associated with the operation of the camera;
• a problem with the firmware;
• others.

Attention, a reboot is in progress!

The most basic way to deal with the iPhone's camera not focusing is to restart the gadget. This method works with almost all mobile devices and computers. The fact is that when you reboot, the system restarts all the services necessary for the debugged functioning of the phone.

It is possible that one of the services related to the operation of the camera was mistakenly or as a result of a failure to close. There is nothing critical in this, and the gadget will not need repairs.

The phone is restarted, free up some space

Physical damage isn't always the cause of iPhone 5 camera not focusing. When multiple applications are running on the phone at the same time, one of them may crash. This is not necessarily the camera software, but any other.

The lack of normal functioning is explained by the filling of the RAM. Although the iPhone is a powerful gadget, it cannot work synchronously with several capacious applications at once. Try to disable unnecessary programs. To do this, double-click on the "Home" button and pull up the window with the application that is no longer required.

Recovery

Still a problem with your camera? Well, let's try another way. Connect your phone to your PC and use iTunes. Reset your phone to factory settings to restore the device to its original appearance. The data will be saved and the settings will be lost. There is nothing critical in this, the main thing is that the system will return to normal, and the camera will begin to function normally.

Nothing helped?

If the camera, as before, refuses to work normally, then the problem is not in the system, but in damage to the device itself. In this case, you should not do anything on your own, but rather contact the Apple Customer Service Center, where they will diagnose and repair the camera, if necessary.

iPhone is one of the most branded and demanded smartphones around the world. The combination of quality and style helped to achieve such popularity. But the owners of this gadget periodically encounter problems during operation. The iPhone does not focus - one of them.

Looking for a reason

Before moving on to the breakdown, you should find out what caused it. Common reasons include:

• damage to the camera when dropped;
• water or moisture getting into the phone case;
• system failure;
• lack of RAM for the operation of the application associated with the operation of the camera;
• a problem with the firmware;
• others.

Attention, a reboot is in progress!

The most basic way to deal with the iPhone's camera not focusing is to restart the gadget. This method works with almost all mobile devices and computers. The fact is that when you reboot, the system restarts all the services necessary for the debugged functioning of the phone.

It is possible that one of the services related to the operation of the camera was mistakenly or as a result of a failure to close. There is nothing critical in this, and the gadget will not need repairs.

The phone is restarted, free up some space

Physical damage isn't always the cause of iPhone 5 camera not focusing. When multiple applications are running on the phone at the same time, one of them may crash. This is not necessarily the camera software, but any other.

The lack of normal functioning is explained by the filling of the RAM. Although the iPhone is a powerful gadget, it cannot work synchronously with several capacious applications at once. Try to disable unnecessary programs. To do this, double-click on the "Home" button and pull up the window with the application that is no longer required.

Recovery

Still a problem with your camera? Well, let's try another way. Connect your phone to your PC and use iTunes. Reset your phone to factory settings to restore the device to its original appearance. The data will be saved and the settings will be lost. There is nothing critical in this, the main thing is that the system will return to normal, and the camera will begin to function normally.

Nothing helped?

If the camera, as before, refuses to work normally, then the problem is not in the system, but in damage to the device itself. In this case, you should not do anything on your own, but rather contact the Apple Customer Service Center, where they will diagnose and repair the camera, if necessary.