Enter BIOS ordinary user required only for setting any parameters or more advanced PC settings. Even on two devices from the same manufacturer, the process of entering the BIOS may be slightly different, since it is influenced by factors such as laptop model, firmware version, configuration motherboard.

The most common BIOS keys on Samsung laptops are F2, F8, F12, Delete, and the most common combinations are Fn + F2, Ctrl + F2, Fn + F8.

This is the list of the most popular lines and models of Samsung laptops and the keys for entering the BIOS for them:

• RV513... In the usual configuration, to switch to BIOS when booting the computer, you need to hold down F2... Also, in some modifications of this model, instead of F2 can be used Delete;
• NP300... This is the most common line of laptops from Samsung, which includes several similar models. In most of them, the key is responsible for the BIOS. F2... The only exception is NP300V5AH, since there is used to enter F10;
• ATIV Book... This series of notebooks includes only 3 models. On ATIV Book 9 Spin and ATIV Book 9 Pro entering the BIOS is done using F2 and on ATIV Book 4 450R5E-X07- by using F8.
• NP900X3E... This model has a keyboard shortcut Fn + F12.

If your laptop model or the series it belongs to is not listed, you can find the login information in the user manual that came with the laptop when you purchase. If it is not possible to find the documentation, then its electronic version can be looked at. To do this, simply use the search bar - enter the full name of your laptop there and find technical documentation in the results.

You can also use the "typing method", but usually it takes too long, because when you press the "wrong" key, the computer will continue to boot anyway, and during the OS boot time it is impossible to try all the keys and their combinations.

When loading a laptop, it is recommended to pay attention to the inscriptions that appear on the screen. On certain models, there you can find a message with the following content Press (key to enter BIOS) to run setup... If you see this message then just press the key that is listed there, and you can enter the BIOS.

Good time!

Today I will tell you how to boot from a USB flash drive or drive on a Samsung N100 netbook.

To do this, insert the USB flash drive, turn on the netbook and press the F2 key.

Thus, we find ourselves in the BIOS. Here we see a summary of the netbook.

Now select the line - Fast BIOS Mode, press Enter and in the small window select the word - Disabled and press Enter.

After that, go to the Exit tab. Here we need to save the changes and exit.

Therefore, select the line - Save Changes and Reset and press the Enter key twice.

Now press the F2 key again (go to BIOS).

Select the Boot tab. Here we go to - Boot Device Priority.

Here we see that the first is HDD, the second is a USB flash drive.

To boot from a USB flash drive, you need to put it in the first place. Just press the F6 key and the flash drive rises up.

To get out of here, you need to press Esc.

Now, again, go to the Exit tab, save and exit.

verify.

We turn on the netbook, and if you see a picture of MultiBoot USB, then everything is done correctly. The download starts from a USB stick.

The commands for entering BIOS on laptops can be absolutely different even from one manufacturer. This is due to the fact that each of them has different models of motherboards.

You will need

• - skills of work in the BIOS system.

Instructions

1. When turning on the laptop, press the Pause key to view the text on the screen. Pay attention to the inscription Press F2 to enter setup. Instead of F2, of course, there can be absolutely any key or even a combination of several. The most common ones are F1, F2, F8, Esc, F10, F11, F12 and so on. You can also use the matching method. Press Enter to exit pause mode.

2. Search the internet for information on your motherboard model. In order to find out its marking, open the properties of the computer by pressing right button mouse on the corresponding item of the "Start" menu. In the new window that appears, select the "Hardware" tab.

3. Open the device manager and find your motherboard in the computer configuration list. Rewrite its name, open a browser and execute the request for the rewritten information, while in the search bar you can add to enter setup / BIOS.

4. Also some old models have information about motherboard computer on a special sticker on which the laptop model is spelled out, check the back wall of the computer for the presence of such. Also check the battery compartment by pulling out the battery beforehand.

5. With the BIOS program open, use the arrow keys to navigate through the menu items. For the metamorphosis of this or that parameter value, the plus and minus buttons are usually programmed, however, everything may depend on the motherboard model.

6. Be extremely careful when introducing metamorphoses into the BIOS parameters, because this program is responsible for the operation of every laptop content. If after saving any difficulties or tasks appeared in the operation of the laptop, restore the initial values ​​using the appropriate command written in the lower part of the BIOS window.

Modern monitors allow the user to make adjustments to the image and other parameters independently, through the control system. The method of metamorphosis and adjusting the settings is the engineering menu.

You will need

• Remote Control.

Instructions

1. Turn on your TV. Press the step info-menu-mute-power. This combination will fit most PDPs and LCD TVs... But some models, exclusively with a diagonal of up to 23 inches, do not respond to this sequence. They have a different combination - MUTE-1-8-2-POWER ON. It should be noted that all these keys must be pressed stepwise and as quickly as possible (no more than 1-2 seconds for everything). If it doesn't work the first time, try again. A window with the "Service Menu" header appears in front of you.

2. Navigate the menu with support for control buttons (right, left, down, up). In order to prefer the exciting section - press the "OK" button. To exit to the upper tier, press the “Menu” button. Design engineering menu every year changes, new platforms and firmware are released, but at the same time the basic parameters remain unwavering: - Panel On Time - the first line, means “panel operating time.” - Ready - turning the DTV tuner on and off (ON and OFF, respectively). - Option table - does not depend on the input and is responsible for the general settings of the TV. - Shop Mode - shop mode (ON - disabled, OFF - enabled). - Dimm Type - information about the matrix that is installed on your model. - Reset - reset the settings.

3. Make adjustments to the settings. Before doing this, think well whether it is worth it. By abnormally changing some parameter, it is allowed to completely knock off all the settings, later on without the help of the wizard, you will not figure it out.

4. Save your settings. If you want to restore the typical (factory) settings, run the “Reset” command.

5. Turn off the TV in order to exit the engineering menu.

6. If, after adjusting the settings, the image deteriorates or other hindrances appear, go back to the menu and load the typical settings (Reset).

Replacement software motherboard allows you to improve the efficiency of your computer and add new possibilities related to its tuning. This process should be performed only after careful preparation and reading of the necessary instructions.

You will need

• - Firmware file;
• - firmware program.

Instructions

1. If you have updated the BIOS more closely and want to roll back its old version, then download required firmware... To do this, it is better to use the formal website of the manufacturer of the motherboard used. If you are working with a laptop, then visit the site of the developer of this mobile computer model.

2. Download the flasher program and the required software version from there. If you didn’t find the initial BIOS version, then download more new firmware, which is minimally different from the original. Traditionally, the sites indicate the release date of the firmware.

3. Before starting the software change process, please reset BIOS settings... To do this, open this menu after restarting your computer. Select Use Default Settings or Reset CMOS and press Enter. Confirm the operations by pressing the Y key.

4. Take care of the correct power source. If you are using a laptop, charge the battery and connect mobile computer to the mains. When working with a stationary computer, it is better to use an uninterruptible power supply. If not, then perform BIOS firmware in nighttime. This will reduce the likelihood of a power outage.

5. Later download operating system run the flasher. Its name depends on the motherboard model and manufacturer. Select the required firmware file and click the Start button. Wait for the software update. The computer can be mechanically rebooted in time for this process or later than its conclusion.

6. Open up BIOS menu and make sure you have all desired functions... Configure the settings for the computer. Save your metamorphosis and restart your PC.

Related Videos

Dispatcher devices Is one of the snap-ins of the Windows OS management console, which contains information about the installed hardware and the sources allocated to it. With the support of the dispatcher, it is allowed to determine the incorrectly working devices o, update the driver or change the hardware settings.

Instructions

1. Open dispatcher devices allowed different methods... Call the drop-down menu by right-clicking on the My Computer icon. Select the "Properties" option and go to the "Hardware" tab. Click the " Dispatcher devices ».

2. If you went under account from the "Users" group, a message will appear stating that you do not have sufficient rights to metamorphose the hardware settings. Click the "Continue" button to open the dispatcher devices .

3. You may prefer the "Control" command in this dropdown menu. The Computer Management console window opens. Expand the snap " Dispatcher devices»By double-clicking on the icon in the list on the left side of the window.

4. It is allowed to go to " Dispatcher devices"Via the" Control Panel ". Open the "System" node by double-clicking and go to the "Hardware" tab in the system properties window. Click the " Dispatcher devices ».

5. In the "Control Panel" double-click on the "Administrative Tools" icon, then open "Computer Management". Expand " Dispatcher devices»In the management console window.

6. There is a chance to run this snap-in with support command line... Call the program launch window by pressing Win + R or by choosing the "Run" command in the "Start" menu. Enter compmgmt.msc. The Computer Management Console window opens. Expand the node " Dispatcher devices ».

7. In order to run from the command line at ease " Dispatcher devices", Enter devmgmt.msc. If you work under the "Users" account, the system will display a message about the impossibility of introducing metamorphoses into the equipment configuration. Click OK to run " Dispatcher devices»In view mode.

8. It is allowed to use a hot key combination to launch this snap. Press the combination Win + Pause / Break in order to bring up the system properties window, and go to the "Hardware" tab. After that, click on the button " Dispatcher devices ».

Related Videos

Related Videos

Helpful advice
Do not change the BIOS parameters if you do not know what results it will lead to.

Replaced BIOS new generation of systems UEFI complicated the process of entering the holy of holies on laptops. Gone are the days in which every user could easily get there by restarting the computer and pressing the Delete button. Or, if this did not help, press some other keys from the functional group - F6, F8 or others.

In this article it will be about how on modern PCs or laptops with modern operating systems such as Windows 8 or Windows 10 go to BIOS... It looks like you are already desperate, asking yourself the question - is this even possible on your laptop? Maybe you don't have any BIOS either?

Do not be afraid! Now you can easily and simply follow the necessary steps. We will do this using the example of a SAMSUNG NP350V5C laptop with Windows 8 installed on it.

We will also look at how you can update the BIOS, and at the end of the article there is a video on how to complete it. customization before installing Windows 7 or 8.

Let's divide the BIOS startup process into 2 stages. So let's go ...

Stage 1: how to enter the boot menu

There are two completely different ways.

First- by using specially performed reboot laptop. This is the recommended way.
Second useful as a last resort if you cannot log in to configure the first method.

Correct reboot option

Just slide your mouse vertically along the right edge of the screen until a pop-up menu appears. You can also call it using the keyboard by pressing Win + C.

The manufacturer has dragged this option far!

Now we press “ Recovery"And here it is - the coveted item" Special download options"- click on" Reboot now».

Your Samsung (or whatever you have) will dutifully reboot and appear in the boot menu.

Extreme method

I have applied this method once, when my laptop crashed severely after updating one of the applications. The laptop hung at the start and did not want to display an authorization window... Therefore, I could not login to do a reboot with special parameters.

I needed to do this to restore the system, but if you have the same problem, it will help you enter the BIOS.

I warn you! It is possible to use this method only as a last resort, when there are no other ways.

This is done like this (I performed these steps on a Samsung product):

1. You connect your laptop to the network
2. Start the system.
3. Disconnect (remove) battery- the laptop continues to work.
4. Disconnect the laptop from the network.
5. You are waiting for a short time.
6. Connect the battery.
7. Plug into the network.
8. Start by pressing the power button.
9. After these steps, you will find yourself in the system boot menu.

Stage 2: start the BIOS

If you did everything correctly, then you will see the system boot menu, in which you should click on the item "".

And then - on ""

We pass to the final phase of the launch - press " Reboot».

The screen will turn off and after a short (or maybe a long) time you will see the BIOS screen:

BIOS update

In my case, in the browser I need to go to the Samsung website and enter the full model name (written on the bottom of the laptop case): NP350V5C-S1JRU

After pressing the Enter button, a list appears in which we select an item from the category " Embedded software»

Since I downloaded it from the official Samsung website, I can safely launch it

and update the BIOS of the laptop:

In my case already installed Last update... If you have available a new version you just have to press the last button to update the BIOS.

Related video setting up BIOS for installing Windows 7 or 8

I am glad to greet you, my dear readers. In a series of my articles on how to enter the BIOS, I left the most seasoned manufacturers for dessert. modern technology... And today I will talk about how to enter the BIOS on a Samsung laptop.

Despite the big name and leadership in the markets of other devices, Samsung laptops are no longer among the top three in terms of sales in Russia. But they get into the Top 5 steadily. This means that among you, friends, there will be many users who will be especially interested in this article.

Let me remind you that basic settings systems are hardwired into one of the chips of the motherboard, and work with them is carried out through a simple program called. In it you can set the date and time, work with passwords, change the order of work with boot devices, turn off the touchpad, adjust the frequency of the processor and RAM dies, set the power parameters.

By far, the most common use of BIOS is booting from a USB flash drive for Windows installations... In the same way, you can restore the system while preserving important data.

We go to BIOS

As you can see, knowing how to enter the BIOS, you can solve many complex problems. So let's get down to business as soon as possible, but first make sure that your laptop is in the process of working with system settings will not accidentally shut down. This is highly undesirable as it can practically destroy your device;).

But let's not talk about gloomy, just recharge the battery or connect the power supply (use both sources of energy for safety reasons).

Now turn on or reload your desktop computer and immediately start pressing the "magic" key "F2" at intervals a couple of times per second. In most cases, you will see the BIOS in front of you.

Each BIOS has its own approach

But this option may not work. The fact is that Samsung, although it did not conquer the entire laptop market, presented on it a large number of various models (NP, R, RC and others), which, in addition to the electronic filling, also differ in the ways of entering the BIOS.

• For example, for the RV 513 line, in addition to the F2, Delete is also worth trying;
• In the slightly numerical ATIV Book series, there is also an exception to general rule... Owners of ATIV Book 4 450R5E-X07 should remember the "F8" button.
• In the most common NP 300 series, the F2 key is also the main one. But in the NP 300V5AH model, press F10;
• In the more advanced model NP900X3E, you need to press two keys "Fn + F12" at once.

As you can see, the most different ways... And that's largely due to the stuffing in your laptop.

Therefore, in addition to F2, you should always have in stock such “bios” keys as F8, F12, Delete, or the popular key combinations “Fn + F2”, “Ctrl + F2” or “Fn + F8”. But it is still better to pay attention to the inscriptions that appear on the monitor during the boot process. Especially on these: "Press (key) to run setup".

This is what we are looking for.

Actually, this is all you need to know to download BIOS on Samsung laptop... I think you can easily master these simple skills. And you will be able to handle your PC professionally.

On this I wish everyone good luck and say: "See you soon, on my blog!"