Getting settings: general description

As mentioned earlier, the sending of settings is initiated automatically by the system as soon as the SIM card is registered on the network. The process of accepting these parameters is performed on the client side (by storing them in the device). In fact, in order to start using the MMS service, you just need to save the settings received from the operator in the form of a text message. However, not all subscribers receive the sent parameters on time. For example, a person purchased a new gadget, inserted a SIM card into it, and immediately received several text messages, including MMS parameters. Most likely, a person will ignore such notifications, since he does not currently have a need for this service. But in the future, he may have a fair question about how to connect and configure MMS on Tele2.

Request MMC parameters

If the client of an alternative mobile operator had to find himself in a similar situation, then there are several ways to get out of it:

• request auto settings through the operator's service;
• perform a similar operation through the web interface of the personal account;
• prescribe the settings on your device yourself.

Attention! You should enter the data correctly if you are puzzled by the question of whether on Tele2. Detailed instructions with recommendations are contained on the official resource of the operator. Later in this article, we will also tell you how you can configure it yourself.

How to automatically set up MMS on Tele2

If the option of manually entering connection parameters is not interesting to the subscriber and he is faced with the question of ordering auto settings for MMS, then we recommend using the voice service to receive them.

In order to receive and apply on your mobile device the parameters necessary for using the MMS service, you should dial the number 679 (the connection is free, as well as receiving the settings). After contacting this number, the subscriber from whose device the request was made will receive a text message. After that, the person will just need to press the "Save" button on the smartphone display.

If you check with the contact center operator how to set up MMS on Tele2 automatically, he will also recommend ordering parameters for connecting through your personal account.

When You Might Need Manual Adjustment

Subscriber intervention and the need for self-configuration may occur in the following cases:

• the settings sent by the operator were not “accepted” by the device;
• when installing a SIM card, settings were not received;
• the received settings message has been deleted.

Sometimes the inability to send a multimedia message may also be due to the fact that this service is simply disabled on the number. Despite the fact that it is basic and available on all SIM cards by default, the subscriber himself could have previously turned it off. In this case, you must first be puzzled by how to connect MMS to Tele 2. How to manually configure the settings on your gadget, read on. Below it will be described how you can prescribe the necessary parameters in the menu of the device.

We prescribe the parameters for the MMS service on devices running on the Android OS

So, if you use a gadget on Android » and it was not possible to independently figure out how to automatically configure MMS on Tele2, then it's time to manually prescribe the necessary parameters.

In the settings of the device, you should find the section for mobile networks. Here you should add an additional access point. In the parameters requested for it, enter the data:

• The home page address is mmsc.tele2.ru (a similar value should be entered in the "Access Point (APN)" field - mms.tele2.ru).
• Type of access point - mms.
• Proxy - 193.12.40.65.
• MCC - 250.
• MNC - 20.

Values ​​for the "login" and "password" fields do not need to be set.

Service setup for iPhone

For owners of apple devices, the procedure for entering parameters is not much different from that discussed earlier.

You should add an MMS proxy - 193.12.40.65:8080, APN MMSC (similarly, as on Android devices).

After the previously specified parameters are registered on the device, it should be rebooted - this is done so that the settings take effect. Previously, before performing the procedure for entering parameters into the corresponding menu of the device, it is still recommended to try auto-tuning (we described earlier how to automatically configure MMS on Tele2).

Another recommendation after successful setup is to send a test multimedia message to any number, even your own. This is necessary in order to register a device with the entered settings on the network - this will allow you to receive similar messages from other subscribers in the future on your device in a standard form, and not as a link to the MMS gallery.